Solid-state light-emitting devices based on direct-bandgap semiconductors have, over the past two decades, been utilized as energy-efficient sources of lighting. However, fabrication of these devices typically relies on expensive high-temperature and high-vacuum processes, rendering them uneconomical for use in large-area displays. Here, we report high-brightness light-emitting diodes based on solution-processed organometal halide perovskites. We demonstrate electroluminescence in the near-infrared, green and red by tuning the halide compositions in the perovskite. In our infrared device, a thin 15 nm layer of CH3NH3PbI(3-x)Cl(x) perovskite emitter is sandwiched between larger-bandgap titanium dioxide (TiO2) and poly(9,9'-dioctylfluorene) (F8) layers, effectively confining electrons and holes in the perovskite layer for radiative recombination. We report an infrared radiance of 13.2 W sr(-1) m(-2) at a current density of 363 mA cm(-2), with highest external and internal quantum efficiencies of 0.76% and 3.4%, respectively. In our green light-emitting device with an ITO/PEDOT:PSS/CH3NH3PbBr3/F8/Ca/Ag structure, we achieved a luminance of 364 cd m(-2) at a current density of 123 mA cm(-2), giving external and internal quantum efficiencies of 0.1% and 0.4%, respectively. We show, using photoluminescence studies, that radiative bimolecular recombination is dominant at higher excitation densities. Hence, the quantum efficiencies of the perovskite light-emitting diodes increase at higher current densities. This demonstration of effective perovskite electroluminescence offers scope for developing this unique class of materials into efficient and colour-tunable light emitters for low-cost display, lighting and optical communication applications.

Organometal trihalide perovskite based solar cells have exhibited the highest effi ciencies to-date when incorporated into mesostructured composites. However, thin solid fi lms of a perovskite absorber should be capable of operating at the highest effi ciency in a simple planar heterojunction confi guration. Here, it is shown that fi lm morphology is a critical issue in planar heterojunction CH 3 NH 3 PbI 3− x Cl x solar cells. The morphology is carefully controlled by varying processing conditions, and it is demonstrated that the highest photocurrents are attainable only with the highest perovskite surface coverages. With optimized solution based fi lm formation, power conversion effi ciencies of up to 11.4% are achieved, the fi rst report of effi ciencies above 10% in fully thin-fi lm solution processed perovskite solar cells with no mesoporous layer.

Solar cells comprising methylammonium lead iodide perovskite (MAPI) are notorious for their sensitivity to moisture. We show that hydrated crystal phases are formed when MAPI is exposed to water vapour at room temperature and that these phase changes are fully reversed when the material is subsequently dried. The reversible formation of CH 3 NH 3 PbI 3 •H 2 O followed by (CH 3 NH 3 ) 4 PbI 6 •2H 2 O (upon long exposure times) was observed using time resolved XRD and ellipsometry of thin films prepared using 'solvent engineering', single crystals, and state of the art solar cells. In contrast to water vapour, the presence of liquid water results in the irreversible decomposition of MAPI to form PbI 2 . MAPI changes from dark brown to transparent on hydration; the precise optical constants of CH 3 NH 3 PbI 3 •H 2 O formed on single crystals were determined, with a bandgap at 3.1 eV. Using the single crystal optical constants and thin film ellipsometry measurements, the time dependent changes to MAPI films exposed to moisture were modelled. The results suggest that the mono-hydrate phase forms independently of the depth in the film suggesting rapid transport of water molecules along grain boundaries. Vapour phase hydration of an unencapsulated solar cell (initially J sc ≈ 19 mA cm -2 and V oc ≈ 1.05 V at 1 sun) resulted in more than a 90 % drop in short circuit photocurrent and around 200 mV loss in open circuit potential, but these losses were fully reversed after the cell was exposed to dry nitrogen for 6 hours. Hysteresis in the current-voltage characteristics was significantly increased after this dehydration, which may be related to changes in the defect density and morphology of MAPI following recrystallization from the hydrate. Based on our observations we suggest that irreversible decomposition of MAPI in the presence of water vapour only occurs significantly once a grain has been fully converted to the hydrate phase.

Organometal trihalide perovskite solar cells offer the promise of a low-cost easily manufacturable solar technology, compatible with large-scale low-temperature solution processing. Within 1 year of development, solar-to-electric power-conversion efficiencies have risen to over 15%, and further imminent improvements are expected. Here we show that this technology can be successfully made compatible with electron acceptor and donor materials generally used in organic photovoltaics. We demonstrate that a single thin film of the lowtemperature solution-processed organometal trihalide perovskite absorber CH 3 NH 3 PbI 3-x Cl x , sandwiched between organic contacts can exhibit devices with power-conversion efficiency of up to 10% on glass substrates and over 6% on flexible polymer substrates. This work represents an important step forward, as it removes most barriers to adoption of the perovskite technology by the organic photovoltaic community, and can thus utilize the extensive existing knowledge of hybrid interfaces for further device improvements and flexible processing platforms.

Lithium salts have been shown to dramatically increase the conductivity in a broad range of polymeric and small molecule organic semiconductors (OSs). Here we demonstrate and identify the mechanism by which Li(+) p-dopes OSs in the presence of oxygen. After we established the lithium doping mechanism, we re-evaluate the role of lithium bis(trifluoromethylsulfonyl)-imide (Li-TFSI) in 2,2',7,7'-tetrakis(N,N-di-p-methoxyphenyl-amine)9,9'-Spirobifluorene (Spiro-OMeTAD) based solid-state dye-sensitized solar cells (ss-DSSCs). The doping mechanism consumes Li(+) during the device operation, which poses a problem, since the lithium salt is required at the dye-sensitized heterojunction to enhance charge generation. This compromise highlights that new additives are required to maximize the performance and the long-term stability of ss-DSSCs.

Cs2AgBiBr6 double perovskite thin films were prepared and incorporated into photovoltaic devices featuring power conversion efficiencies close to 2.5%.

We describe the simple, scalable, single-step, and polar-solvent-free synthesis of high-quality colloidal CsPbX (X=Cl, Br, and I) perovskite nanocrystals (NCs) with tunable halide ion composition and thickness by direct ultrasonication of the corresponding precursor solutions in the presence of organic capping molecules. High angle annular dark field scanning transmission electron microscopy (HAADF-STEM) revealed the cubic crystal structure and surface termination of the NCs with atomic resolution. The NCs exhibit high photoluminescence quantum yields, narrow emission line widths, and considerable air stability. Furthermore, we investigated the quantum size effects in CsPbBr and CsPbI nanoplatelets by tuning their thickness down to only three to six monolayers. The high quality of the prepared NCs (CsPbBr ) was confirmed by amplified spontaneous emission with low thresholds. The versatility of this synthesis approach was demonstrated by synthesizing different perovskite NCs.

High-performance dye-sensitized solar cells are usually fabricated using nanostructured TiO(2) as a thin-film electron-collecting material. However, alternative metal-oxides are currently being explored that may offer advantages through ease of processing, higher electron mobility, or interface band energetics. We present here a comparative study of electron mobility and injection dynamics in thin films of TiO(2), ZnO, and SnO(2) nanoparticles sensitized with Z907 ruthenium dye. Using time-resolved terahertz photoconductivity measurements, we show that, for ZnO and SnO(2) nanoporous films, electron injection from the sensitizer has substantial slow components lasting over tens to hundreds of picoseconds, while for TiO(2), the process is predominantly concluded within a few picoseconds. These results correlate well with the overall electron injection efficiencies we determine from photovoltaic cells fabricated from identical nanoporous films, suggesting that such slow components limit the overall photocurrent generated by the solar cell. We conclude that these injection dynamics are not substantially influenced by bulk energy level offsets but rather by the local environment of the dye-nanoparticle interface that is governed by dye binding modes and densities of states available for injection, both of which may vary from site to site. In addition, we have extracted the electron mobility in the three nanoporous metal-oxide films at early time after excitation from terahertz conductivity measurements and compared these with the time-averaged, long-range mobility determined for devices based on identical films. Comparison with established values for single-crystal Hall mobilities of the three materials shows that, while electron mobility values for nanoporous TiO(2) films are approaching theoretical maximum values, both early time, short distance and interparticle electron mobility in nanoporous ZnO or SnO(2) films offer considerable scope for improvement.