Landslides are the most destructive geological hazard in the hilly regions. For systematic landslide mitigation and management, landslide evaluation and hazard zonation is required. Over the past few decades several techniques have been developed that can be used for landslide evaluation and zonation. These techniques can broadly be classified into qualitative and quantitative approaches. Qualitative approaches include geomorphological analysis and heuristic techniques whereas quantitative approaches include statistical, artificial intelligence and deterministic techniques. In quantitative techniques prediction for landslide susceptibility is based on the actual realistic data and interpretations. Further, the quantitative techniques also overcome the subjectivity of qualitative approaches. Each of these techniques may consider different causative factors and utilizes various means for factor evaluation and analysis. When compared, each of these techniques has its own advantage and disadvantage over other techniques. The selection of appropriate technique for landslide hazard evaluation and zonation is very crucial. The factors that need to be considered to adopt an appropriate approach are; investigation purpose, the extent of the area to be covered, the type of mapping units, the scale of map to be produced, type of data to be used, type of landslides, availability of resources, capability and skill set of an evaluator and the accessibility to the study area. The main aim of this article is to present a comprehensive review on various techniques and approaches available for landslide susceptibility and hazard zonation mapping. Further, attempt is also made to assess the effectiveness of these techniques in landslide hazard zonation studies.
Goncha Siso Eneses area of East Gojam Zone in northwestern Ethiopia is one of the most landslide-prone regions, which is characterized by frequent landslide occurrences causing fatalities and damages in cultivated and non-cultivated lands, infrastructure and properties. Hence, preparing a landslide susceptibility map is very helpful in reducing the damages in infrastructure and properties and loss of animal and human lives. In this study, GIS-based information value and logistic regression models were applied. A reliable and detailed landslide inventory with 894 landslides was prepared through detailed fieldwork and Google Earth image interpretation. These landslides were randomly divided into training data set for model development and testing data set for model validation. Nine landslide causative factors like slope, curvature, aspect, lithology, distance to stream, distance to lineament, distance to spring, rainfall and land use/cover were integrated with training landslides to determine the weight(s) of each landslide factor and factor classes using Information Value and Logistic Regression models, respectively. The landslide susceptibility index map was then produced by summing the weights of all the landslide factors using raster calculator of the spatial analyst tool in GIS. To evaluate the performance of the information value and logistic regression models for landslide susceptibility modeling, the relative landslide density index and area under the curve (AUC) of the receiver operating characteristic curves were performed on both the training and testing landslide data sets. The model has an AUC accuracy of 88.9% success rate and 85.9% prediction rate for information value model whereas 81.8% success rate and 80.2% predictive rate for logistic regression model.
Simada area is found in the South Gondar Zone of Amhara National Regional State and it is 780Km far from Addis Ababa. Physiographically, it is part of the northwestern highlands of Ethiopia. This area is part of the Guna Mountain which is characterized by weathered volcanic rocks, rugged morphology with deeply incised gorges, heavy rainfall and active surface processes. Many landslides have occurred on August 2018 after a period of heavy rainfall and they caused many damages to the local people. In this study, Frequency Ratio (FR) and Weights of Evidence (WoE) models were applied to evaluate the landslide causative factors and generate landslide susceptibility maps (LSMs). The landslide inventory map that consists of 576 active and passive landslide scarps was prepared from intensive fieldwork and Google Earth image interpretation. These landslide locations were randomly divided into 80% training and 20% validation datasets. Seven landslide causal factors including aspect, slope, curvature, lithology, land use, rainfall and distance to stream were combined with a training dataset using GIS tools to generate the LSMs of the study area. Then the area was divided into five landslide susceptibility zones of very low, low, moderate, high and very high. Later, the resulting maps have been validated by using area under the curve and landslide density index methods. The result showed that the predictive rate of FR and WoE models were 88.2% and 84.8%, respectively. This indicated that the LSM produced by FR model showed a better performance than that of WoE model. Finally, the LSMs produced by FR and WoE models can be used by decision-makers for land use planning and landslide mitigation purpose.
Database construction for landslide factors (slope, aspect, profile curvature, plan curvature, lithology, land use, distance from lineament & distance from river) and landslide inventory map is an important step in landslide susceptibility modelling. Using the frequency ratio model, the weights for each factor classes were calculated and assigned in GIS so as to add these factors and produce landslide susceptibility index maps based on mathematical combination theory. However, before combining them, their independence among each other should be ascertained. For this, the correlation matrix of logistic regression was applied and this showed that most of the correlations between factors were either absent or very insignificant suggesting that all landslide factors are independent. From a set of eight landslide factors, a total of 247 landslide susceptibility map combinations can be generated. However, for simplification, only 28 landslide susceptibility maps were chosen. Then the best landslide susceptibility map was selected based on high prediction accuracy. But, when there is similarity in the prediction accuracies of different combinations, the landslide susceptibility index difference values can be used as another selection criterion. Hence, the susceptibility map from a combination of all landslide factors except distance from river was found to be the best one. Among the 28 representative combinations, landslide susceptibility maps with the same prediction accuracy of 87.7% have been found in spite of their dissimilarity in their difference values. The combination, with a limited number of landslide factors and the highest prediction accuracy of 87.7%, was found from a combination of slope, lithology, land use and distance from lineament. In order to validate the prediction model, landslides were overlaid over the landslide susceptibility map and the number of landslides that fall into each susceptibility class was calculated. From this analysis 0.39%, 1.84%, 9.1%, 32.04% and 56.63% of the landslides fall in the very low, low, medium, high and very high landslide susceptibility classes respectively. Since 88.67% of the landslides fall in the high and very high susceptibility classes, the landslide susceptibility map can be considered reliable to predict future landslides.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.