Abstract:In this experimental investigation the laser surface texturing of tool steel of type 90MnCrV8 has been conducted. The 5-axis highly dynamic laser precision machining centre Lasertec 80 Shape equipped with the nano-second pulsed ytterbium fibre laser and CNC system Siemens 840 D was used. The planar and spherical surfaces first prepared by turning have been textured. The regular array of spherical and ellipsoidal dimples with a different dimensions and different surface density has been created. Laser surface texturing has been realized under different combinations of process parameters: pulse frequency, pulse energy and laser beam scanning speed. The morphological characterization of ablated surfaces has been performed using scanning electron microscopy (SEM) technique. The results show limited possibility of ns pulse fibre laser application to generate different surface structures for tribological modification of metallic materials. These structures were obtained by varying the processing conditions between surface ablation, to surface remelting. In all cases the areas of molten material and re-cast layers were observed on the bottom and walls of the dimples. Beside the influence of laser beam parameters on the machined surface quality during laser machining of regular hemispherical and elipsoidal dimple texture on parabolic and hemispherical surfaces has been studied.
In this paper the laser surface texturing (LST) technology as one of the methods of tribological properties modifying of mating steel surfaces is analysed. The area density of dimple-like depression along with the dimple diameter are the only main factors which significantly influence the friction coefficient value, therefore the effect of different values of area density of dimples: 6 %, 11 % and 16 % on the contact coefficient of friction was analysed. Surface textures were manufactured on the planar areas of compression platens (90MnCrV8 tool steel) using a pulsed-beam laser. The values of coefficients of friction were obtained via a ring compression test. Test sample compression was realized in lubrication-free and hydrodynamic regime. A significant improvement of tribological properties in contact steel areas was experimentally observed in both friction regimes. The results of experiments showed that by applying of surface texturing with defined shape and dimensions of dimples and lubricating oil at the same time, the coefficient of friction value can be reduced to about of 75%.
Laser machining is one of the most widely used advanced noncontact machining processes used for creating new surfaces, structures, cavities and also complex electro-mechanical devices, usually with very small dimensions, by laser radiation. It is the process in which the material’s thermophysical properties rather than mechanical properties determine the machinability. Design of process parameters is highly critical for successful material removal and high machine surface quality. In the paper the laser beam milling is experimentally studied applying the nanosecond pulse fibre laser and alumina ceramic as working material. The influence of pulse energy, pulse repetition rate, scanning speed and tracks displacement on material removal efficiency and the quality of machined surface is reported.
The morphological texturing of forming tool surfaces has a high potential to reduce friction and tool wear and also has an impact on the surface layers properties of formed material. In order to understand the effect of different types of tool textures, produced by nanosecond fibre laser, on the tribological conditions at the interface tool-formed material and on the integrity of formed part surface layers, the series of experimental investigations have been carried out. The coefficient of friction for different texture parameters (individual feature shape, including the depth profile of the cavities and orientation of the features relative to the material flow) was evaluated via a Ring Test and the surface layers integrity of the formed material (surface roughness and subsurface micro hardness) was also experimentally analysed. The results showed a positive effect of surface texturing on the friction coefficients and the strain hardening of test samples material. Application of surface texture consisting of dimple-like depressions arranged in radial layout contributed to the most significant friction reduction of about 40%. On the other hand, this surface texture contributed to the increase of surface roughness parameters, Ra parameter increased from 0.49 μm to 2.19 μm and the Rz parameter increased from 0.99 μm to 16.79 μm.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.