ABSTRAKTelah dibuat sebuah mesin untuk mencuci garam yang digunakan oleh petani di Desa Muarabaru kecamatan Cilamaya Wetan Kabupaten Karawang, dengan Bahan dasar menggunakan material SUS 316L. Dari data mesin yang dibuat mesin pencuci ini memiliki kecepatan mesin pengerolan maksimal 3800 rpm sedangkan kapasitasmesin tersebut bisa mencuci garan dengan kapasitas 100 kg/jam. Pelaksanaan Pengabdian Masyarakat ini bertujuan untuk meningkatkan perkonomian dibidang pengolahan garam sehingga garam yang dihasilkan bisa dipasarkan dengan nilai jual yang tinggi. Dari hasil pengujian mesin pencuci garam ini mempunyai efisiensi 85% bisa dikatakan performance dari mesin tersebut baik dan bisa digunakan oleh petani pengolah garam. Kata kunci: mesin pencuci garam; material SUS 316L; efisiensi mesin. ABSTRACTA machine for washing salt used by farmers in Muarabaru Village, Cilamaya Wetan District, Karawang Regency has been made, with the basic material using SUS 316L material. From the data, the machine made by this washing machine has a maximum rolling machine speed of 3800 rpm, while the capacity of the machine can wash guarantees with a capacity of 100 kg/hour. The implementation of this Community Service aims to improve the economy in the field of salt processing so that the salt produced can be marketed with a high selling value. From the results of testing this salt washing machine has an efficiency of 85%, it can be said that the performance of the machine is good and can be used by salt processing farmers. Keywords: salt washing machine; SUS 316L material; machine efficiency.
Telah dilakukan penelitian tentang modifikasi dan pengujian sistem penyemprot padi dengan penambahan pompa elektrik 12 v. Tekanan penyemprotan standar ditargetkan sebesar 1,0 – 1,6 bar (kg/cm2). Pengaturan tekanan dan volume penyemprotan akan dilakukan oleh potensiometer. Penyemprot hasil modifikasi mampu tetap bekerja ketika daya baterai habis, karena konstruksi dasar pompa manual tetap dipertahankan. Setelah percobaan didapatkan data bahwa tekanan maksimal pompa manual pada waktu penyemprotan adalah 1,2 bar, sementara untuk pompa dc tekanannya mencapai 1,9 bar (potensiometer 1 putaran penuh 3,68 kΩ). Sementara untuk volume penyemprotan bonggol padi pada kondisi nozzle standar didapatkan untuk pompa manual adalah 1376 L/ha dan 2304 L/ha untuk pompa dc (potensiometer 1 putaran). Untuk hasil pengukuran volume penyemprotan dengan nozzle 1 lubang (3 lubang ditutup dari 4 lubang) pompa manual 272 L/ha dan pompa dc 336 L/ha (potensiometer 1 putaran).
Garbage is one of the issues that are still being resolved. The trash volume continues to grow and has developed into a severe issue in Karawang, particularly at the University of Singaperbangsa Karawang. Converting trash into electrical energy is one of the waste applications. Utilizing a waste power plant (WPP) is one method of converting garbage to electrical energy. The waste energy plant comprises many significant components, including boilers, incinerators, turbines, generators, control panels, and the mainframe. Stainless steel plates, iron plates, stirrup iron, brass, L iron, hollow iron, bricks, cement, iron pipes, and stainless steel pipes are the materials required to manufacture WPP. The test procedure produced a maximum pressure of 5 bar, a combustion chamber temperature of 162.2°C, and an alternator voltage of 21.9 volts using data acquired from 180 minutes of burning with heterogeneous or mixed trash. After 135 minutes of burning wood, the pressure in the combustion chamber is 5 bars, and the temperature is 205.4 degrees, producing an alternator voltage of 22.1 volts.
Telah dilakukan pembuatan sistem electrospinning untuk mensintesis nanofiber. Tujuan dari penelitian ini adalah membuat electrospinning dengan memodifikasi syringe pump yang dapat bergerak kanan-kiri dan menggunakan collector silinder. Pengujian sistem electrospinning dilakukan dalam pembuatan nanofiber Polivinil Alkohol (PVA) 10%. Struktur dan morfologi nanofiber PVA dikarakterisasi menggunakan Scanning Electron Microscopy (SEM). Hasil SEM menunjukkan bahwa nanofiber PVA relatif seragam dengan ukuran diameter rata-rata (147,85 ± 24,73) nm. Hasil nanofiber pada penelitian ini diharapkan dapat digunakan diberbagai aplikasi.
ABSTRAKPengembangan material komposit menuntut terciptanya material yang lebih ramah lingkungan. Salah satunya yaitu dengan pemanfaatan serat alam sebagai alternative pengganti serat kaca.Penelitian ini dimaksudkan untuk menganalisa pengaruh fraksi volume sekam padi 10%, 35% dan 50 %. Pembuatan komposit dimulai dengan mencapurkan sekam padi dengan larutan NaOH 7%, kemudian dialkalisasi selama 2 jam, cetakan komposit menggunakan standart ASTM D 638 dengan metode Hand Lay Up. Pengujian sifat mekanik meliputi pengujian tarik dan karakterisasi menggunakan Scanning Electron Microscope (SEM). Hasil penelitian menunjukkan bahwa kekuatan tarik tertinggi terjadi pada fraksi volume 10 % sampai dengan 35% yaitu 11,071 N/mm2 sampai dengan 11,387 N/mm 2 . Dari hasil pengujian SEM menujukan bentuk morfologi sekam padi fraksi 35% yang tebentuk didominasi resin butek dan tampak mengikat sekam padi secara optimal. Sedangkan bentuk morfologi fraksi volume sekam 50% terlihat bentuk morfologi gelembung udara selain itu rongga terbentuk lebih besar sehingga resin tidak cukup mampu mengikat sekam padi secara optimal. Sehingga dapat disimpulkan bahwa pencampuran fraksi sekam padi 10% sampai dengan 35% akan meningkatkan nilai kekuatan tarik selain itu, bentuk morfologi yang diamati terlihat sangat baik dibanding fraksi sekam 50%. Kata kunci: Komposit Sekam padi, Pengujian Tarik, pengujian SEM ABSTRACTThe development of composite materials demands the creation of more environmentally friendly materials. One of them is the utilization of natural fiber as an alternative to the change is fiber glass. This study aims to determine the effect of rice husk fraction volume to 10%, 35% and 50%. Composite preparation was started by mixing the rice husk with 7% NaOH solution, then it was calculated for 2 hours, the composite mold using ASTM D 638 standard with Hand Lay Up method. Testing of mechanical properties using tensile test and characterization using SEM. The results showed a high tensile strength in the volume fraction of 10% to 35%, ie 11.071 N/mm 2 up to 11,387 N/mm 2 . From the SEM test results morphological form of rice husk fraction 35% which is dominated by the resins butek and looks optimally husk rice husk. The morphological form of 50% husk volume fraction is seen in morphological form of air bubbles besides that the cavity is formed larger so that the resin is not enough able to bind rice husk optimally. It can be concluded that mixing rice husk fraction of 10% to 35% will increase the tensile strength values in addition, the morphology was observed look very good compared chaff fraction of 50%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.