No abstract

Electromanipulation and electrical characterization of cancerous cells is becoming a topic of high interest as the results reported to date demonstrate a good differentiation among various types of cells from an electrical viewpoint. Dielectrophoresis and broadband dielectric spectroscopy are complementary tools for sorting, identification, and characterization of malignant cells and were successfully used on both primary tumor cells and culture cells as well. However, the literature is presenting a plethora of studies with respect to electrical evaluation of these type of cells, and this review is reporting a collection of information regarding the functioning principles of different types of dielectrophoresis setups, theory of cancer cell polarization, and electrical investigation (including here the polarization mechanisms). The interpretation of electrical characteristics against frequency is discussed with respect to interfacial/Maxwell−Wagner polarization and the parasitic influence of electrode polarization. Moreover, the electrical equivalent circuits specific to biological cells polarizations are discussed for a good understanding of the cells' morphology influence. The review also focuses on advantages of specific low-conductivity buffers employed currently for improving the efficiency of dielectrophoresis and provides a set of synthesized data from the literature highlighting clear differentiation between the crossover frequencies of different cancerous cells.

Silica‐containing polyimide films were prepared by sol‐gel technique using a poly(amic acid) and tetraethoxysilane. The poly(amic acid) was synthesized by solution polycondensation reaction of 4,4′‐oxydiphthalic anhydride with 2,6‐bis(3‐aminophenoxy)benzene and an aminosilane coupling agent, 3‐aminopropyltriethoxysilane. The properties of these films, such as water vapors sorption capacity, dynamic contact angles and contact angle hysteresis, thermal, and electrical behavior have been evaluated with respect to their structure. The polymer films exhibited good thermal stability having the initial decomposition temperature above 450°C, glass transition temperature in the range of 223−228°C, and low‐dielectric constant in the range of 2.64−3.16. Two subglass transitions, γ and β, were evidenced by dynamic mechanical analysis and dielectric spectroscopy. The surface morphology and the roughness were investigated by atomic force microscopy and scanning electron microscopy. POLYM. ENG. SCI., 2010. © 2009 Society of Plastics Engineers

Samples composed of a polymer matrix were loaded with different fractions from 0% to 30% of Fe oxide magnetic nanoparticles with an average size ranging from 5 to 25 nm. The permittivity and permeability of the composites were determined upon a very wide frequency range, spanning from DC to 30 GHz using different methods with overlapping frequency intervals. The nanoparticle content was observed to significantly modify the permeability and permittivity behavior of the polymer. The frequency and intensity of both dielectric and ferromagnetic resonances of the composites are clearly affected by the presence of the magnetic nanoparticles, and the composites can be optimized for specific applications requiring absorption of electromagnetic radiation from the MHz to the GHz range.

Aromatic polyimides are high‐performance polymers used in applications demanding service at enhanced temperature while maintaining their structural integrity and excellent combination of chemical, physical and mechanical properties. The incorporation of various metallic additives into a polyimide matrix improves its properties, leading to materials required by specific applications. Hybrid polyimide films containing barium and titanium oxides having thicknesses in the range of tens of micrometres were prepared. These films were obtained using the sol–gel technique starting from a poly(amic acid) and a soluble precursor of metal oxides. They exhibited good thermal stability having an initial decomposition temperature above 460 °C, and a glass transition temperature in the range 217–238 °C. Two subglass transitions, γ and β, were evident from dynamic mechanical analysis and dielectric spectroscopy. A study of the thermal and electrical behaviour of some hybrid polyimide films containing barium and titanium oxides is presented. On increasing the concentration of metal oxides, an increase of dielectric constant and a decrease of thermal stability of the hybrid films were observed. The presence of metal oxides shifted the glass transition temperature and the temperature of the β transition to higher values. Copyright © 2009 Society of Chemical Industry