No abstract

Numerous bacteria have been found to exhibit the capacity for intracellular polyhydroxyalkanoates (PHA) accumulation. Current methods for PHA production at the industrial scale are based on their synthesis from microbial isolates in either their wild form or by recombinant strains. High production costs are associated with these methods; thus, attempts have been made to develop more cost-effective processes. Reducing the cost of the carbon substrates (e.g., through feeding renewable wastes) and increasing the efficiency of production technologies (including both fermentation and downstream extraction and recovery) are two such examples of these attempts. PHA production processes based on mixed microbial cultures are being investigated as a possible technology to decrease production costs, since no sterilization is required and bacteria can adapt quite well to the complex substrates that may be present in waste material. PHA accumulation by mixed cultures has been found under various operational conditions and configurations at both bench-scale and full-scale production. The process known as "feast and famine" or as "aerobic dynamic feeding" seems to have a high potential for PHA production by mixed cultures. Enriched cultures submitted to a transient carbon supply can synthesize PHA at levels comparable to those of pure cultures. Indeed, the intracellular PHA content can reach around 70% of the cell dry weight, suggesting that this process could be competitive with pure culture PHA production when fully developed. Basic and applied research of the PHA production process by mixed cultures has been carried out in the past decade, focusing on areas such as microbial characterization, process configuration, reactor operational strategies, process modeling and control, and polymer characterization. This paper presents a review of the PHA production process with mixed cultures, encompassing the findings reported in the literature as well as our own experimental results in relation to each of these areas.

No abstract

Production of polyhydroxyalkanoates (PHA) by mixed cultures has been widely studied in the last decade. Storage of PHA by mixed microbial cultures occurs under transient conditions of carbon or oxygen availability, known respectively as aerobic dynamic feeding and anaerobic/aerobic process. In these processes, PHA-accumulating organisms, which are quite diverse in terms of phenotype, are selected by the dynamic operating conditions imposed to the reactor. The stability of these processes during long-time operation and the similarity of the polymer physical/chemical properties to the one produced by pure cultures were demonstrated. This process could be implemented at industrial scale, providing that some technological aspects are solved. This review summarizes the relevant research carried out with mixed cultures for PHA production, with main focus on the use of wastes or industrial surplus as feedstocks. Basic concepts, regarding the metabolism and microbiology, and technological approaches, with emphasis on the kind of feedstock and reactor operating conditions for culture selection and PHA accumulation, are described. Challenges for the process optimization are also discussed.

No abstract

The present work reports on the production and characterization of polyhydroxyalkanoates (PHAs) with different valerate contents, which were synthesized from microbial mixed cultures, and the subsequent development of nanocomposites incorporating bacterial cellulose nanowhiskers (BCNW) via solution casting processing. The characterization of the pure biopolyesters showed that the properties of PHAs may be strongly modified by varying the valerate ratio in the poly(3-hydroxybutyrate-co-3-hydroxyvalerate) (PHBV) copolymer, as expected. Increasing the valerate content was seen to greatly decrease the melting temperature and enthalpy of the material, as well as its rigidity and stiffness, resulting in a more ductile behaviour. Additionally, the higher valerate PHA displayed higher permeability to water and oxygen and higher moisture sensitivity. Subsequently, BCNW were incorporated into both PHA grades, achieving a high level of dispersion for a 1 wt.-% loading, whereas some agglomeration took place for 3 wt.-% BCNW. As evidenced by DSC analyses, BCNW presented a nucleating effect on the PHA matrices. BCNW also increased the thermal stability of the polymeric matrices when properly dispersed due to strong matrix-filler interactions. Barrier properties were seen to depend on relative humidity and improved at low nanofiller loadings and low relative humidity.

The microbial community of a fermented molasses-fed sequencing batch reactor (SBR) operated under feast and famine conditions for production of polyhydroxyalkanoates (PHAs) was identified and quantified through a 16 S rRNA gene clone library and fluorescence in situ hybridization (FISH). The microbial enrichment was found to be composed of PHA-storing populations (84% of the microbial community), comprising members of the genera Azoarcus, Thauera and Paracoccus. The dominant PHA-storing populations ensured the high functional stability of the system (characterized by high PHA-storage efficiency, up to 60% PHA content). The fermented molasses contained primarily acetate, propionate, butyrate and valerate. The substrate preferences were determined by microautoradiography-FISH and differences in the substrate-uptake capabilities for the various probe-defined populations were found. The results showed that in the presence of multiple substrates, microbial populations specialized in different substrates were selected, thereby co-existing in the SBR by adapting to different niches. Azoarcus and Thauera, primarily consumed acetate and butyrate, respectively. Paracoccus consumed a broader range of substrates and had a higher cell-specific substrate uptake. The relative species composition and their substrate specialization were reflected in the substrate removal rates of different volatile fatty acids in the SBR reactor.

No abstract