No abstract

Abstract. The paper presents the theoretical basis and practical implementation of the concept of a five-stroke cycle where an additional expansion of the working medium is achieved in a separate cylinder. The work, carried out at the Cracow University of Technology, constitutes a development of the idea of five-stroke engine. This paper proposes a new theoretical thermodynamic cycle that describes the processes occurring in a five-stroke engine. It has been taken into consideration that the expansion ratio of the engine is twice the compression ratio. At the next step an analysis of the thermodynamic cycle with particular emphasis on its thermal efficiency compared to efficiency of four-stroke engine has been shown. In the second part of the article selected research results of the five-stroke engine built based on the existing four-cylinder spark ignition engine have been presented. A comparison of the total efficiency obtained by the engine in the four-and five-stroke version has been provided. Similar comparisons for specific emission of the selected exhaust components have also been given.Key words: innovative five-stroke engine cycle, Carnot Cycle, Otto cycle, five-stroke engine, additional expansion, increase of thermal efficiency of the five-stroke engine cycle.

No abstract

Abstract:The paper presents the results of research on the turbocharged spark ignition engine with additional exhaust expansion in a separate cylinder, which is commonly known as the five-stroke engine. The research engine has been constructed based on the four cylinder engine in which two outer cylinders work as the fired cylinders, while two internally connected inner cylinders constitute the volume of the additional expansion process. The engine represents a powertrain realizing an ultra-expansion cycle. The purpose of the study was to find an effective additional expansion process in the five-stroke engine. Cylinder-pressure indicating measurements were carried out for one of the fired cylinders and the additional expansion cylinder. The study was performed for over 20 different points on the engine operation map. This allowed us to determine a dependence between the pressure indicated in the fired cylinders and in the additional expansion cylinders. A function of the mean pressure indicated in the additional expansion cylinder versus a brake mean effective pressure was also presented. This showed a load threshold from which the work of the cylinders of additional expansion produced benefits for the output of the experimental engine. The issues of mechanical efficiency and effective efficiency of this engine were also discussed.

No abstract