Na avicultura atual, o uso de silos verticais para armazenagem de ração avícola nas fábricas e nas granjas, é fator fundamental, pois garantem produto de qualidade e rapidez no processo de descarga; entretanto, são detectados diversos problemas no armazenamento e no processo de escoamento da ração, devido às falhas no projeto dos silos, tendo em vista serem negligenciadas as propriedades de fluxo dos produtos, como conseqüência do não conhecimento da teoria de fluxo. Objetivou-se, com este trabalho, analisar o tipo de fluxo em silo prismático com descarga excêntrica para dois tipos de ração avícola. Determinaram-se as propriedades físicas (teor de gordura, teor de umidade e granulometria) e as de fluxo (ângulo de atrito interno, efetivo ângulo de atrito interno, ângulo de atrito do produto com a parede, densidade em função da consolidação, função fluxo e fator fluxo). A análise do fluxo foi feita visualmente e através de seqüências fotográficas, variando a seção transversal de descarga, relação altura/lado e tempo de armazenamento. Com os resultados, verificou-se que a tremonha tronco piramidal com descarga excêntrica proporciona fluxo de massa para as rações analisadas.
This paper aims to study the concrete dosage conditions for structural purposes in construction sitesl, and the impacts of non-compliance of structural concrete for structural safety, having as study case the city of Angicos / RN. Were analyzed the dynamic elasticity modulus, static elasticity modulus and the compressive strength of concrete samples. Was conducted to collect the survey data, a field research aiming to gather information about dosage of concrete used in the works, as well as the collection of cylindrical specimens of 150 mm diameter by 300 mm of height, prepared according to practice of those professionals. The study indicated a clear necessity to reflection on the subject, since there is no concern, or even, a lack of knowledge by the interviewed professionals regarding the care and procedures necessary for the production of concrete with satisfactory quality, once at least 50% of evaluated construction sites presented compressive strength lower than 20 MPa, minimal strength to structural concrete, as recommended by ABNT-NBR 6118:2014.
RESUMOObjetivando contribuir para maior conhecimento sobre as essências arbóreas existentes no nordeste brasileiro, buscouse através deste trabalho determinar as características tecnológicas da algaroba (Prosopis juliflora (Sw.) DC e indicar alternativas de uso de sua madeira para construções rurais. A caracterização da espécie foi feita conforme valores, referentes à condição padrão de umidade (12%), obtidos em ensaios realizados de acordo com a NBR 7190 da Associação Brasileira de Norma Técnicas. Foram realizados ensaios de densidades básica e aparente, teor de umidade e de resistên-cia à compressão paralela, tração paralela e cisalhamento, paralelo às fibras. Os resultados foram analisados pela comparação dos valores obtidos com aqueles encontrados na literatura, para outras madeiras. De acordo com os resultados, conclui-se que a madeira da algaroba se equipara em resistência e rigidez, às madeiras tradicionalmente utilizadas nas construções, no Brasil. Palavras-chave: algaroba, propriedades físicas e mecânicas, construções ruraisTechnological characteristics of Prosopis juliflora (sw.) DC.and alternatives for its rational use ABSTRACTThis work was carried out with the objective of increasing the knowledge on the existing wild trees species in northeastern Brazil. The main purpose was to determine the technological characteristics of the Prosopis juliflora (Sw.) DC and to indicate alternative use of its wood for agricultural constructions. The procedures adapted for the characterization of the species were in agreement with the Brazilian Norm 7190 of Brasilian Association of Technical Norms referring to the standard conditions moisture content of 12%. Tests of basic and apparent densities were carried out, moisture content and parallel fibers resistance to compression, traction and shear, were measured. The results were analyzed through the comparison of the values obtained with those found in literature for other kinds of wood. In agreement with the results, it was concluded that the Prosopis juliflora's wood can be compared with other traditional kinds of wood used in Brazil.
The use of synthetic fibers as reinforcement for concrete replacing the steel reinforcement has been diffused worldwide in several applications, gaining prominence in the application for industrial floors, tunnel linings, road pavements, etc., i.e., continuous structures in contact with soil that require performance in the elastic medium. The present study investigated the applicability of concrete reinforced with synthetic fibers in the bottom slab of silos supported directly on the ground, being composed of an experimental study and a case study. The experimental study consisted of the analysis of the mechanical behavior of this concrete by testing three concentrations of synthetic fibers (3.0, 4.5 and 6.0 kg m -3 ) in a conventional simple concrete matrix. The case study consisted of the design of this part in conventional reinforced concrete and concrete reinforced with synthetic fibers with the objective of performing an economic comparison between the two projects. The experimental results showed that the fiber concentration that contributed to a better mechanical performance of the concrete matrix was 3.0 kg m -3 . The case study showed that the most economical design was the one made with fiber-reinforced concrete.Concreto reforçado com fibras para o fundo plano de silos RESUMO: O emprego de fibras sintéticas como reforço para concretos em substituição das armaduras de aço vem sendo difundido mundialmente em diversas aplicações, ganhando destaque na aplicação para pisos industriais, revestimentos de túneis, pavimentos rodoviários, etc., isto é, estruturas contínuas em contato com o solo que requerem desempenho no meio elástico. O presente trabalho investiga a aplicabilidade do concreto reforçado com fibras sintéticas na laje de fundo de silos apoiados diretamente sobre o solo, sendo o mesmo composto por um estudo experimental e um estudo de caso. O estudo experimental resume-se na análise do comportamento mecânico desse concreto, testando-se três concentrações de fibras sintéticas (3.0, 4.5 e 6.0 kg m -3 ) numa matriz de concreto simples convencional. O estudo de caso consiste no dimensionamento dessa peça em concreto armado convencional e concreto reforçado com fibras sintéticas, com o objetivo de realizar um comparativo econômico entre os dois projetos. Os resultados experimentais mostraram que a concentração de fibras que contribuiu para melhor desempenho mecânico da matriz de concreto foi o de 3.0 kg m -3 . O estudo de caso mostrou que o projeto mais econômico foi o dimensionado com concreto reforçado com fibras. Palavras-chave: comportamento mecânico, dimensionamento, materiais alternativos
As barragens são construções utilizadas pelas civilizações ao longo dos anos, possuindo diversas finalidades. Apesar dessas estruturas gerarem vários benefícios, podem possuir alto potencial de risco em caso de colapso, causando consequências catastróficas, tanto ao meio ambiente quanto a vida humana, caso não sejam monitoradas e não passem por manutenções periódicas. O estado do Rio Grande do Norte possui catalogadas pela Agência Nacional de Águas (ANA), 619 reservatórios. Dentro desse número, tem-se os grandes e pequenos reservatórios. Esses grandes e pequenos reservatórios são importantes para combater a escassez hídrica que sofre a maior parte do estado Dentre estes são considerados motivo de preocupação principalmente os pequenos, que somam mais de dez mil onde não são catalogados e a maioria não possui nenhuma normativa técnica.. Diante disso, este trabalho teve como objetivo principal realizar um levantamento das condições gerais da Barragem de Itans, localizada no município de Caicó/RN. Para tal, foi elaborado um estudo contendo o histórico construtivo da barragem ao longo de sua vida útil e realizada visitas in loco para identificar possíveis anomalias presentes na mesma. As principais anomalias observadas nos taludes de jusante e montante e na crista da barragem foram: malha asfáltica danificada, meio fio danificado, saídas d'água com rachaduras, presença de vegetações e de árvores pequenas até de porte médio nos taludes, canaletas de drenagem obstruídas e com trincas. Sugerem-se reparos simples nessas anomalias para que a barragem consiga enfrentar os períodos de cheias com segurança.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.