No abstract

The issue of sustainability has long been the subject of interest of the architecture engineering and construction sector. All three aspects of sustainability - economic, environmental and social - can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Researches have shown that one of the main barriers to insufficiency CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of the EU's environmental priorities. Aim of the article is to confirm the economic potential of construction and demolition waste audit processing through case study. A pre-demolition waste audit has been processed for unused building of shopping center in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which will also increase the sustainability of construction projects. In addition, the cost parameters of selected waste disposal methods could be another dimension of building information modelling.

No abstract

Any construction project, even one that is excellently planned and organized, is prone to the risk of unforeseen events and problems, which in effect can cause late completion of works. The paper presents the results of the research conducted among Polish and Slovakian building contractors. One attempt was to identify and assess the potential causes of delays in the construction works resulting from the provisions of the contract. The knowledge of these factors can help contractors to take protective measures, reducing the risk of delays during the implementation of construction works.

The issue of sustainability has long been the subject of interest in architecture engineering and the construction sector. All three aspects of sustainability—economic, environmental, and social—can be affected through appropriate construction waste management. Construction and demolition waste (CDW) is one of the largest worldwide waste streams, therefore, it is given great attention by all stakeholders (investors, contractors, authorities, etc.). Research studies show that one of the main barriers to insufficient CDW recovery is inadequate policies and legal frameworks to manage CDW. It is also one of European Union’s (EU) environmental priorities. The aim of the article was to confirm the economic potential of construction and demolition waste audit processing through a case study. A pre-demolition waste audit was processed for an unused shopping center building in the town Snina in Slovakia. Subsequently, a comparison of economic parameters (waste disposal costs and transport costs) of the recommended CDW management was performed. This comparison confirmed the economic benefits of environmentally friendly construction waste management methods according to the waste audit results, which would also increase the sustainability of construction projects. Additionally, the cost parameters of selected waste disposal methods could be another dimension of building information modeling.

Life cycle cost management is an integral part of buildings construction. The life cycle cost approach can be considered an objective approach because it considers all life cycles of buildings. Information and communication technology is one of the critical factors for the success of construction projects. Several studies point to the importance of information and communication technology use in life cycle cost management. Generally, information and communication technology can be helpful in the cost management process of buildings. However, few implementation factors of information and communication technology are used in the life cycle cost management of buildings. The research assumes that the most critical implementation factor is the investment cost for information and communication technologies used in cost management during the life cycle. The relative importance index method was used to evaluate and quantify the final rank of implementation factors. The Kruskal–Wallis test was used to confirm or reject research results that were statistically significant.

No abstract

Progressive technologies and practices are shifting the possibilities of building design and improving work efficiency. Constantly changing site conditions require different procedures and designs that take into account these changing conditions, whether it is a design solution, a change in environmental conditions, or just sustainability factors. Adaptive building design offers opportunities to cope with changing factors to achieve the ähighest possible level of building quality. This case study deals with the topic of adaptive formwork design for building renovation, taking into account sustainability. The aim of the article is an investigation and demonstration of the building information modeling (BIM) environment used for the adaptive design of formwork elements for the building renovation in the context of sustainability. The object of the case study is a building in the center of Kosice, Slovakia. The BIM environment allows prompt and correct adaptation of the formwork design to changing lighting conditions, ventilation, heating and temperature during the design of the building.