This paper describes an instrument designed to distinguish frozen from thawed land surfaces from an Earth satellite by bouncing signals back to Earth from deployable mesh antennas.

No abstract

This paper formulates and demonstrates methods for extracting vegetation characteristics and underlying ground surface topography from interferometric synthetic aperture radar (INSAR) data. The electromagnetic scattering and radar processing, which produce the INSAR observations, are modeled, vegetation and topographic parameters are identified for estimation, the parameter errors are assessed in terms of INSAR instrumental performance, and the parameter estimation is demonstrated on INSAR data and compared to ground truth. The fundamental observations from which vegetation and surface topographic parameters are estimated are (1) the cross-correlation amplitude, (2) the cross-correlation phase, and (3) the synthetic aperture radar (SAR) backscattered power. A calculation based on scattering from vegetation treated as a random medium, including the effects of refractivity and absorption in the vegetation, yields expressions for the complex cross correlation and backscattered power in terms of vegetation characteristics. These expressions lead to the identification of a minimal set of four parameters describing the vegetation and surface topography: (1) the vegetation layer depth, (2) the vegetation extinction coefficient (power loss per unit length), (3) a parameter involving the product of the average backscattering amplitude and scatterer number density, and (4) the height of the underlying ground surface. The accuracy of vegetation and ground surface parameters, as a function of INSAR observation accuracy, is evaluated for aircraft INSAR, which is characterized by a 2.5-m baseline, an altitude of about 8 km, and a wavelength of 5.6 cm. It is found that for •0.5% accuracy in the INSAR normalized cross-correlation amplitude and •5 ø accuracy in the interferometric phase, few-meter vegetation layer depths and ground surface heights can be determined from INSAR for many types of vegetation layers. With the same observational accuracies, extinction coefficients can be estimated at the 0.1-dB/m level. Because the number of parameters exceeds the number of observations for current INSAR data sets, external extinction coefficient data are used to demonstrate the estimation of the vegetation layer depth and ground surface height from INSAR data taken at the Bonanza Creek Experimental Forest in Alaska. This demonstration shows approximately 5-m average ground truth agreement for vegetation layer depths and ground-surface heights, with a clear dependence of error on stand height. These errors suggest refinements in INSAR data acquisition and analysis techniques which will potentially yield few-meter accuracies. The information in the INSAR parameters is applicable to a variety of ecological modeling issues including the successional modeling of forested ecosystems.

The Soil Moisture Active Passive (SMAP) mission Level-4 Surface and Root-Zone Soil Moisture (L4_SM) data product is generated by assimilating SMAP L-band brightness temperature observations into the NASA Catchment land surface model. The L4_SM product is available from 31 March 2015 to present (within 3 days from real time) and provides 3-hourly, global, 9-km resolution estimates of surface (0–5 cm) and root-zone (0–100 cm) soil moisture and land surface conditions. This study presents an overview of the L4_SM algorithm, validation approach, and product assessment versus in situ measurements. Core validation sites provide spatially averaged surface (root zone) soil moisture measurements for 43 (17) “reference pixels” at 9- and 36-km gridcell scales located in 17 (7) distinct watersheds. Sparse networks provide point-scale measurements of surface (root zone) soil moisture at 406 (311) locations. Core validation site results indicate that the L4_SM product meets its soil moisture accuracy requirement, specified as an unbiased RMSE (ubRMSE, or standard deviation of the error) of 0.04 m3 m−3 or better. The ubRMSE for L4_SM surface (root zone) soil moisture is 0.038 m3 m−3 (0.030 m3 m−3) at the 9-km scale and 0.035 m3 m−3 (0.026 m3 m−3) at the 36-km scale. The L4_SM estimates improve (significantly at the 5% level for surface soil moisture) over model-only estimates, which do not benefit from the assimilation of SMAP brightness temperature observations and have a 9-km surface (root zone) ubRMSE of 0.042 m3 m−3 (0.032 m3 m−3). Time series correlations exhibit similar relative performance. The sparse network results corroborate these findings over a greater variety of climate and land cover conditions.

The National Aeronautics and Space Administration (NASA) Soil Moisture Active Passive (SMAP) satellite is scheduled for launch in January 2015. In order to develop robust soil moisture retrieval algorithms that fully exploit the unique capabilities of SMAP, algorithm developers had identified a need for long-duration combined active and passive L-band microwave observations. In response to this need, a joint Canada-U.S. field experiment (SMAPVEX12) was conducted in Manitoba (Canada) over a six-week period in 2012. Several times per week, NASA flew two aircraft carrying instruments that could simulate the observations the SMAP satellite would provide. Ground crews collected soil moisture data, crop measurements, and biomass samples in support of this campaign. The objective of SMAPVEX12 was to support the development, enhancement, and testing of SMAP soil moisture retrieval algorithms. This paper details the airborne and field data collection as well as data calibration and analysis. Early results from the SMAP active radar retrieval methods are presented and demonstrate that relative and absolute soil moisture can be delivered by this approach. Passive active L-band sensor Manuscript (PALS) antenna temperatures and reflectivity, as well as backscatter, closely follow dry down and wetting events observed during SMAPVEX12. The SMAPVEX12 experiment was highly successful in achieving its objectives and provides a unique and valuable data set that will advance algorithm development.Index Terms-Passive microwave, soil moisture, Soil Moisture Active Passive (SMAP), synthetic aperture radar.

A preclinical prototype of a transcutaneous thermal therapy system has been developed for the targeted treatment of breast cancer cells using focused microwaves as an adjuvant to radiation, chemotherapy, and high intensity focused ultrasound (HIFU). The prototype system employs a 2D array of tapered microstrip patch antennas operating at 915 MHz to focus continuous-wave microwave energy transcutaneously into the pendent breast suspended in a coupling medium. Prior imaging studies are used to ascertain the material properties of the breast tissue, and this data is incorporated into a multiphysics model. Time-reversal techniques are employed to find a solution (relative amplitudes and phase) for focusing at a given location. Modeling tests of this time-reversal focusing method have been performed which demonstrate good targeting accuracy within heterogeneous breast tissue. Experimental results using the laboratory prototype to perform focused heating in tissue-mimicking gelatin phantoms have demonstrated 1.5 cm diameter focal spot sizes and differential heating at the desired focus sufficient to achieve an antitumor effect confined to the target region.

No abstract

Characterization of boreal forests in ecosystem models requires temporal and spatial distributions of water content and biomass over local and regional scales. In this paper, we report on the use of a semi-empirical algorithm for deriving these parameters from polarimetric synthetic aperture radar (SAR) measurements. The algorithm is based on a two layer radar backscatter model that stratifies the forest canopy into crown and stem layers and separates the structural and biometric attributes of forest stands. The structural parameters are estimated by training the model with SAR image data over dominant coniferous and deciduous stands in the boreal forest such as jack pine, black spruce, and aspen. The algorithm is then applied on AIRSAR images collected during the Boreal Ecosystem Atmospheric Study (BOREAS) over the boreal forest of Canada. The results are verified using biometry measurements during BOREAS-intensive field campaigns. Field data relating the water content of tree components to dry biomass are used to modify the coefficients of the algorithm for crown and stem biomass. The algorithm was then applied over the entire image generating biomass maps. A set of 18 test sites within the imaged area was used to assess the accuracy of the biomass maps. The accuracy of biomass estimation is also investigated by choosing different combinations of polarization and frequency channels of the AIRSAR system. It is shown that polarimetric data from P-band and L-band channels provide similar accuracy for estimating the above-ground biomass for boreal forest types. In general, the use of P-band channels can provide better estimates of stem biomass, while L-band channels can estimate the crown biomass more accurately. When AIRSAR images are also used to simulate the data from existing spaceborne radar systems, it was found that the combination of L-band HH polarization (JERS-1), C-band HH polarization (RADARSAT), and C-band VV polarization (ERS-1) had limited capacity for mapping boreal biomass (63% accuracy).