Achieving a stable bone-implant interface is an important factor in the long-term outcome of joint arthroplasty. In this study, we employed an ovine bicortical model to compare the bone-healing response to five different surfaces on titanium alloy implants: grit blasted (GB), grit blasted plus hydroxyapatite (50 microm thick) coating (GBHA), Porocoat(R) (PC), Porocoat(R) with HA (PCHA) and smooth (S). Push-out testing, histology, and backscatter scanning electron microscope (SEM) imaging were employed to assess the healing response at 4, 8, and 12 weeks. Push-out testing revealed PC and PCHA surfaces resulted in significantly greater mechanical fixation over all other implant types at all time points (p <.05). HA coating on the grit-blasted surface significantly improved fixation at 8 and 12 weeks (p <.05). The addition of HA onto the porous coating did not significantly improve fixation in this model. Quantification of ingrowth/ongrowth from SEM images revealed that HA coating of the grit-blasted surfaces resulted in significantly more ongrowth at 4 weeks (p <.05).

No abstract

Introduction: Preservation of residual hearing in cochlear implant recipients has been demonstrated to be possible and provides the potential benefit of combined electric and acoustic auditory stimulation. A prototype 16-mm multichannel array has been designed to facilitate placement of 22 electrodes without damage to intracochlear structures. The electrode array is suitable for insertion via the round window membrane (RWM) or a small cochleostomy. Aim: To evaluate the insertion trajectory and the presence of trauma to intracochlear structures with the prototype electrode inserted by either the RWM or a scala tympani cochleostomy. Materials and Methods: Eighteen fresh frozen human temporal bones were prepared for cochlear implantation using a standard transmastoid facial recess technique. Twelve electrodes were implanted at the University of Melbourne and 6 at the Medizinische Hochschule Hannover. In Melbourne fluoroscopy was used to monitor the insertions. Twelve prototype electrodes were inserted via the RWM. A further 6 electrodes were inserted via a small scala tympani cochleostomy. The cochleostomy was sited inferior to the RWM to avoid trauma to the basilar membrane and spiral ligament. Specimens were embedded and fixed with acrylic resin and the cochleae then examined histologically at 200-µm intervals using a grinding and polishing technique. Results: Full insertion of the electrode was achieved without significant resistance in all RWM and cochleostomy specimens. In two RWM specimens fold-over of the electrode tip occurred, and in one specimen the electrode penetrated the spiral ligament to lie in an ‘endosteal ‘position. In one cochleostomy specimen the electrode was rotated within the cochlea to face laterally rather than towards the modiolus. The final electrode position differed for the two groups, with the electrodes inserted via the RWM lying in a more perimodiolar position along the first part of the basal turn. The average depth of insertion was 240° for the RWM electrodes and 255° for the cochleostomy electrodes. Histologic examination showed no damage in any specimen to the modiolus, osseous spiral lamina or basilar membrane. Conclusions: A prototype hearing preservation electrode array was inserted by either a RWM or a scala tympani cochleostomy without evidence of significant intracochlear trauma.

Synthetic suburethral slings have recently become popular despite the risk of erosion commonly associated with synthetic implants. Some of these materials seem to have unexpectedly low erosion rates. Based on the hypothesis that erosion is due, in part, to biomechanical properties, we undertook an in vitro study. The biomechanical properties of eight non-resorbable synthetic implant materials, stiffness (slope, N/mm) and peak load (N) were determined from load vs. displacement curves. Open-weave Prolene mesh showed unique biomechanical properties compared to other tested materials. The tension- free vaginal tape had the lowest initial stiffness (0.23 N/mm), i.e. low resistance to deformation at forces below the elastic limit, whereas the stiffest implant tested, a nylon tape, reached 6.83 N/mm. We concluded that the TVT and other wide-weave Prolene tapes have unique biomechanical characteristics. These properties may be at least partly responsible for the apparent clinical success of the implants.