Since the successful synthesis of the first MXenes, application developments of this new family of two-dimensional materials on energy storage, electromagnetic interference shielding, transparent conductive electrodes and field-effect transistors, and other applications have been widely reported. However, no one has found or used the basic characteristics of greatly changed interlayer distances of MXene under an external pressure for a real application. Here we report a highly flexible and sensitive piezoresistive sensor based on this essential characteristics. An in situ transmission electron microscopy study directly illustrates the characteristics of greatly changed interlayer distances under an external pressure, supplying the basic working mechanism for the piezoresistive sensor. The resultant device also shows high sensitivity (Gauge Factor ~ 180.1), fast response (<30 ms) and extraordinarily reversible compressibility. The MXene-based piezoresistive sensor can detect human being’s subtle bending-release activities and other weak pressure.
Recently, wearable and flexible pressure sensors have sparked tremendous research interest, and considerable applications including human activity monitoring, biomedical research, and artificial intelligence interaction are reported. However, the large-scale preparation of low-cost, high-sensitivity piezoresistive sensors still face huge challenges. Inspired by the specific structures and excellent metal conductivity of a family of two-dimensional (2D) transition-metal carbides and nitrides (MXene) and the high-performance sensing effect of human skin including randomly distributed microstructural receptors, we fabricate a highly sensitive MXene-based piezoresistive sensor with bioinspired microspinous microstructures formed by a simple abrasive paper stencil printing process. The obtained piezoresistive sensor shows high sensitivity (151.4 kPa −1 ), relatively short response time (<130 ms), subtle pressure detection limit of 4.4 Pa, and excellent cycle stability over 10,000 cycles. The mechanism of the high sensitivity of the sensor is dynamically revealed from the structural perspective by means of in situ electron microscopy experiment and finite element simulation. Bioinspired microspinous microstructures can effectively improve the sensitivity of the pressure sensor and the limit of the detectable subtle pressure. In practice, the sensor shows great performance in monitoring human physiological signals, detecting quantitatively pressure distributions, and remote monitoring of intelligent robot motion in real time.
In large-scale applications of portable and wearable electronic devices, high-performance supercapacitors are important energy supply sources. However, since the reliability and stability of supercapacitors are generally destroyed by mechanical deformation and damage during practical applications, the stretchability and self-healability must be exploited for the supercapacitors. Preparing the highly stretchable and self-healable electrodes is still a challenge. Here, we report reduced graphene oxide fiber based springs as electrodes for stretchable and self-healable supercapacitors. The fiber springs (diameters of 295 μm) are thick enough to reconnect the broken electrodes accurately by visual inspection. By wrapping fiber springs with a self-healing polymer outer shell, a stretchable and self-healable supercapacitor is successfully realized. The supercapacitor has 82.4% capacitance retention after a large stretch (100%), and 54.2% capacitance retention after the third healing. This work gave an essential strategy for designing and fabricating stretchable and self-healable supercapacitors in next-generation multifunctional electronic devices.
A novel cable-type flexible supercapacitor with excellent performance is fabricated using 3D polypyrrole(PPy)-MnO2 -CNT-cotton thread multi-grade nanostructure-based electrodes. The multiple supercapacitors with a high areal capacitance 1.49 F cm(-2) at a scan rate of 1 mV s(-1) connected in series and in parallel can successfully drive a LED segment display. Such an excellent performance is attributed to the cumulative effect of conducting single-walled carbon nanotubes on cotton thread, active mesoporous flower-like MnO2 nanoplates, and PPy conductive wrapping layer improving the conductivity, and acting as pseudocapacitance material simultaneously.
A solid-state flexible supercapacitor (SC) based on organic-inorganic composite structure was fabricated through an “in situ growth for conductive wrapping” and an electrode material of polypyrrole (PPy)-MnO2 nanoflakes-carbon fiber (CF) hybrid structure was obtained. The conductive organic material of PPy greatly improved the electrochemical performance of the device. With a high specific capacitance of 69.3 F cm−3 at a discharge current density of 0.1 A cm−3 and an energy density of 6.16 × 10−3 Wh cm−3 at a power density of 0.04 W cm−3, the device can drive a commercial liquid crystal display (LCD) after being charged. The organic-inorganic composite active materials have enormous potential in energy management and the “in situ growth for conductive wrapping” method might be generalized to open up new strategies for designing next-generation energy storage devices.
MXenes, or transition metal carbides or nitrides, as an advanced 2D materials have already attracted extensive attention due to their high conductivity and large specific surface area for applications in the field of energy storage. MXenes also have many other advanced properties such as good transmittance and adjustable work function over a large range. However, few works study the properties of MXenes in the field of optoelectronics. Here, the optoelectronic properties of Ti3C2TX (with a work function of 4.37 eV) on n‐type silicon (n‐Si) of vertical van der Waals heterostructures are studied. The Ti3C2TX not only functions as the transparent electrode but also contributes to the separation and transport of photo‐induced carriers. After investigations on the influence of annealing, temperature, illumination, and applied voltage on the performance of Ti3C2TX/n‐Si Schottky junction heterostructures, this study fabricates a self‐driven vertical junction photodetectors with high response and recovery speeds. It is believed that the excellent photoelectric properties of MXenes will attract many researchers' attention to the application of MXenes in the photoelectrical field.
Nowadays, the integrated systems on a plane substrate containing energy harvesting, energy storing, and working units are strongly desired with the fast development of wearable and portable devices. Here, a simple, low cost, and scalable strategy involving ink printing and electrochemical deposition is proposed to fabricate a flexible integrated system on a plane substrate containing an all-solid-state asymmetric microsupercapacitor (MSC), a photoconduct-type photodetector of perovskite nanowires (NWs), and a wireless charging coil. In the asymmetric MSCs, MnO-PPy and VO-PANI composites are used as positive and negative electrodes, respectively. Typical values of energy density in the range of 15-20 mWh cm at power densities of 0.3-2.5 W cm with an operation potential window of 1.6 V are achieved. In the system, the wireless charging coil receives energy from a wireless power transmitter, which then can be stored in the MSC to drive the photoconductive detector of perovskite NWs in sequence. The designed integrated system exhibits a stable photocurrent response comparable with the detector driven by an external power source. This research provides an important routine to fabricate integrated systems.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.