The antimicrobials incorporated in the resilient materials inhibited fungal growth during 14 days, with lower MICs for nystatin and chlorhexidine.

Soil physical properties Development of corn plants Fixed shank openers A B S T R A C TSoil compaction has always been a problem to the agricultural productivity, mainly in clayey soils under the no-tillage (NT). Alternatives to mitigate this problem are necessary. The aim of this study was to evaluate the effect of seeder equipped with fixed shanks openers, working at three depths, in a Ferralic Nitisol (Rhodic), under NT on the mitigation of soil compaction and corn (Zea mays L.) plant development. The test comprised three treatments regarding the depth at which the shank openers of a seeder used to sow corn worked: openers reaching up to 0.05 m; openers reaching up to 0.07 m; and openers reaching up to 0.17 m. The effect of these treatments was evaluated in relation to the determination of soil physical parameters, and corn plant parameters. The use of a seeder equipped with fixed shanks openers up to 0.17 m depth caused an increase in soil macroporosity and total porosity, and a decrease in soil bulk density, soil resistance to penetration and degree of compactness in the layer between 0.07 and 0.17 m. The improved physical conditions of the soil in this layer led to a further development of the root system of plants in greater depth, and consequently to a better development of corn plants with higher stalk diameter, root density and root length. The use of a seeder equipped with fixed shanks openers working up to 0.17 m depth, therefore, promoted physical improvement to the soil, favoring the development of corn plants, and presenting potential to mitigate the compaction of clayey soils under NT.

The ability of Candida albicans to form biofilms on denture surfaces is a significant cofactor in the pathogenesis of denture stomatitis. In this study, we applied a differential staining approach and scanning electron microscopy (SEM) to analyse the effect of sodium hypochlorite and chlorhexidine gluconate on the viability, removal and morphology of C. albicans forming biofilms on denture acrylic using an in vitro model. Immediately after treatment, to distinguish live from dead C. albicans cells in the remaining biofilms, the specimens were stained differentially and analysed by confocal scanning laser microscopy. Moreover, morphological alterations of fungal cells were investigated using scanning electron microscopy. All disinfectant solutions killed all remaining fungal cells on the specimens. Interestingly, 4% chlorhexidine did not remove these cells from the acrylic resin surface whereas sodium hypochlorite solutions (1% and 2%) provided almost complete biofilm removal. Furthermore, treating the specimens with sodium hypochlorite induced cell morphology alterations, as seen in the residual fungal cells. Finally, according to our findings, it can be suggested that sodium hypochlorite solutions are the first choice as denture cleanser when compared with 4% chlorhexidine because those solutions not only killed C. albicans biofilms but also removed them from the heat-polymerised acrylic resin.

ObjectiveChemical solutions have been widely used for disinfection of dentures, but their effect on color stability of denture tooth acrylic resins after repeated procedures is still unclear. The aim of this in vitro study was to evaluate whether repeated cycles of chemical disinfectants affected the color stability of two denture tooth acrylic resins. Material and MethodsSixty disc-shaped specimens (40 mm x 3 mm) were fabricated from two different brands (Artiplus and Trilux) of denture tooth acrylic resin. The specimens from each brand (n=30) were randomly divided into 6 groups (n=5) and immersed in the following solutions: distilled water (control group) and 5 disinfecting solutions (1% sodium hypochlorite, 2% sodium hypochlorite, 5.25% sodium hypochlorite, 2% glutaraldehyde, and 4% chlorhexidine gluconate). Tooth color measurements were made by spectrophotometry. Before disinfection, the initial color of each tooth was recorded. Further color measurements were determined after subjecting the specimens to 7, 21, 30, 45, 60, and 90 immersion cycles in each tested solution. Color differences (ΔE*) were determined using the CIE L*a*b* color system. Data were analyzed using two-way repeated measures analysis of variance (ANOVA) followed by Tukey tests. The significance level was set at 5%. ResultsThere were statistically significant differences in ΔE* among the 5 disinfectants and water during the 90 cycles of immersion for both denture tooth acrylic resins. Distilled water promoted the greatest color change in both denture tooth acrylic resins, nevertheless none of tested disinfectants promoted ΔE* values higher than 1.0 on these acrylic materials during the 90 cycles of disinfection. ConclusionsRepeated immersion cycles in disinfecting solutions alter ∆E* values, however these values do not compromise the color of the tested denture tooth acrylic resins because they are imperceptible to the human eye.

BackgroundIt is well known that the use of denture cleansers can reduce Candida albicans biofilm accumulation; however, the efficacy of citric acid denture cleansers is uncertain. In addition, the long-term efficacy of this denture cleanser is not well established, and their effect on residual biofilms is unknown. This in vitro study evaluated the efficacy of citric acid denture cleanser treatment on C. albicans biofilm recolonization on poly(methyl methacrylate) (PMMA) surface.MethodsC. albicans biofilms were developed for 72 h on PMMA resin specimens (n = 168), which were randomly assigned to 1 of 3 cleansing treatments (CTs) overnight (8 h). CTs included purified water as a control (CTC) and two experimental groups that used either a 1:5 dilution of citric acid denture cleanser (CT5) or a 1:8 dilution of citric acid denture cleanser (CT8). Residual biofilms adhering to the specimens were collected and quantified at two time points: immediately after CTs (ICT) and after cleaning and residual biofilm recolonization (RT). Residual biofilms were analyzed by quantifying the viable cells (CFU/mL), and biofilm architecture was evaluated by confocal laser scanning microscopy (CLSM) and scanning electron microscopy (SEM). Denture cleanser treatments and evaluation periods were considered study factors. Data were analyzed using two-way ANOVA and Tukey’s Honestly Significant Difference (HSD) test (α = 0.05).ResultsImmediately after treatments, citric acid denture cleansing solutions (CT5 and CT8) reduced the number of viable cells as compared with the control (p < 0.01). However, after 48 h, both CT groups (CT5 and CT8) showed biofilm recolonization (p < 0.01). Residual biofilm recolonization was also detected by CLSM and SEM analysis, which revealed a higher biomass and average biofilm thickness for the CT8 group (p < 0.01).ConclusionCitric acid denture cleansers can reduce C. albicans biofilm accumulation and cell viability. However, this CT did not prevent biofilm recolonization.

No abstract

Mandibular bone height does not directly affect the masticatory function and is inversely correlated with the self-perceived masticatory ability.

RESUMOAs substâncias húmicas podem influenciar direta ou indiretamente o metabolismo das plantas, alterando assim o seu crescimento. O objetivo deste trabalho foi avaliar o efeito de substâncias húmicas (SH) no crescimento e na concentração de nutrientes em plantas de feijão (Phaseolus vulgaris, L.) e nos parâmetros cinéticos de absorção de K. O experimento foi realizado em bancada de laboratório, com luz artificial. As plantas cresceram em vasos contendo solução nutritiva completa acrescida de cinco doses (0; 2,5; 5; 10; e 20 mg L -1 de C) de SH solúveis em meio alcalino (ácido húmico + ácido fúlvico), extraídos de amostra de carvão mineral da mina de Candiota, RS, da Companhia Riograndense de Mineração, num delineamento completamente ao acaso, com três repetições. Aos 28 dias de cultivo, foram avaliados parâmetros cinéticos de absorção de K, massa da parte aérea e da raiz seca, teores de N, P, K, Ca e Mg no tecido da parte área e as características morfológicas de raízes (comprimento, área e raio). Os resultados evidenciaram que a adição de SH extraída de carvão mineral estimulou o crescimento do feijão e afetou a cinética de absorção de K. A produção de massa da parte aérea seca das plantas mostrou resposta quadrática à adição de substâncias húmicas, atingindo valor máximo na dose equivalente a 11 mg L -1 de(1) Recebido para publicação em outubro de 2008 e aprovado em maio de 2009.