Although actuation in biological systems is exclusively powered by chemical energy, this concept has not been realized in man-made actuator technologies, as these rely on generating heat or electricity first. Here, we demonstrate that surface-chemistry-driven actuation can be realized in high-surface-area materials such as nanoporous gold. For example, we achieve reversible strain amplitudes of the order of a few tenths of a per cent by alternating exposure of nanoporous Au to ozone and carbon monoxide. The effect can be explained by adsorbate-induced changes of the surface stress, and can be used to convert chemical energy directly into a mechanical response, thus opening the door to surface-chemistry-driven actuator and sensor technologies.
Recent nanomechanical tests on submicron metal columns and wires have revealed a dramatic increase in yield strength with decreasing sample size. Here, we demonstrate that nanoporous metal foams can be envisioned as a three-dimensional network of ultrahigh-strength nanowires, thus bringing together two seemingly conflicting properties: high strength and high porosity. Specifically, we characterized the size-dependent mechanical properties of nanoporous gold using a combination of nanoindentation, column microcompression, and molecular dynamics simulations. We find that nanoporous gold can be as strong as bulk Au, despite being a highly porous material, and that the ligaments in nanoporous gold approach the theoretical yield strength of Au.
The classical terrace-ledge-kink model of crystal growth is widely used to interpret mineral formation in biological and geological systems. A key assumption underlying application of the model is that thermal fluctuations of steps are sufficiently rapid to produce an abundance of kink sites for attachment of growth units. High-resolution in situ atomic force microscopy (AFM) studies and kinetic Monte Carlo simulations of step-edge structure and dynamics show this physical picture to be invalid for the common mineral calcite whose steps exhibit low kink density and weak step edge fluctuations. As a consequence, interactions of impurities with calcite step edges cannot be interpreted with traditional thermodynamic models based on minimization of the Gibbs free energy. Instead, impurity-step interactions follow a different mechanism determined by the kinetics of attachment and detachment.Step advance is unimpeded when the creation of new kinks by attachment of growth units to the step outpaces binding of impurities to the newly created kinks. This kink-limited model offers a plausible explanation for reports of "kinetic disequilibrium" of trace element signatures. Moreover, because kink density is tied to crystal solubility, these findings argue for a theory based on weak fluctuations to interpret growth of many common crystalline phases of importance in geochemical, biological, and technological settings.
Ordinarily, the strength and plasticity properties of a metal are defined by dislocations-line defects in the crystal lattice whose motion results in material slippage along lattice planes. Dislocation dynamics models are usually used as mesoscale proxies for true atomistic dynamics, which are computationally expensive to perform routinely. However, atomistic simulations accurately capture every possible mechanism of material response, resolving every "jiggle and wiggle" of atomic motion, whereas dislocation dynamics models do not. Here we present fully dynamic atomistic simulations of bulk single-crystal plasticity in the body-centred-cubic metal tantalum. Our goal is to quantify the conditions under which the limits of dislocation-mediated plasticity are reached and to understand what happens to the metal beyond any such limit. In our simulations, the metal is compressed at ultrahigh strain rates along its [001] crystal axis under conditions of constant pressure, temperature and strain rate. To address the complexity of crystal plasticity processes on the length scales (85-340 nm) and timescales (1 ns-1μs) that we examine, we use recently developed methods of in situ computational microscopy to recast the enormous amount of transient trajectory data generated in our simulations into a form that can be analysed by a human. Our simulations predict that, on reaching certain limiting conditions of strain, dislocations alone can no longer relieve mechanical loads; instead, another mechanism, known as deformation twinning (the sudden re-orientation of the crystal lattice), takes over as the dominant mode of dynamic response. Below this limit, the metal assumes a strain-path-independent steady state of plastic flow in which the flow stress and the dislocation density remain constant as long as the conditions of straining thereafter remain unchanged. In this distinct state, tantalum flows like a viscous fluid while retaining its crystal lattice and remaining a strong and stiff metal.
We present an extension of the semi-grandcanonical (SGC) ensemble that we refer to as the varianceconstrained semi-grandcanonical (VC-SGC) ensemble. It allows for transmutation Monte Carlo simulations of multicomponent systems in multiphase regions of the phase diagram and lends itself to scalable simulations on massively parallel platforms. By combining transmutation moves with molecular dynamics steps structural relaxations and thermal vibrations in realistic alloys can be taken into account. In this way, we construct a robust and efficient simulation technique that is ideally suited for large-scale simulations of precipitation in multicomponent systems in the presence of structural disorder. To illustrate the algorithm introduced in this work, we study the precipitation of Cu in nanocrystalline Fe.
The key to perfect radiation endurance is perfect recovery. Since surfaces are perfect sinks for defects, a porous material with a high surface to volume ratio has the potential to be extremely radiation tolerant, provided it is morphologically stable in a radiation environment. Experiments and computer simulations on nanoscale gold foams reported here show the existence of a window in the parameter space where foams are radiation tolerant. We analyze these results in terms of a model for the irradiation response that quantitatively locates such window that appears to be the consequence of the combined effect of two length scales dependent on the irradiation conditions: (i) foams with ligament diameters below a minimum value display ligament melting and breaking, together with compaction increasing with dose (this value is typically ∼5 nm for primary knock on atoms (PKA) of ∼15 keV in Au), while (ii) foams with ligament diameters above a maximum value show bulk behavior, that is, damage accumulation (few hundred nanometers for the PKA's energy and dose rate used in this study). In between these dimensions, (i.e., ∼100 nm in Au), defect migration to the ligament surface happens faster than the time between cascades, ensuring radiation resistance for a given dose-rate. We conclude that foams can be tailored to become radiation tolerant.
We report an extensive ab initio study of self-interstitials in V and Mo. Contrary to the widely accepted picture, the ͗111͘ dumbbell is found to be the most stable structure. The activated state for migration is the crowdion configuration, with an extremely low barrier (ϳ0.01 eV), suggesting 1d ͑one-dimensional͒ diffusion at low temperatures and 3d diffusion at high temperature. In the case of Mo, the energy landscape between the ͗111͘ and ͗110͘ dumbbells is very shallow. Predicted migration energies and self-interstitial structures are consistent with experiment.
Pressure-driven shock waves in solid materials can cause extreme damage and deformation. Understanding this deformation and the associated defects that are created in the material is crucial in the study of a wide range of phenomena, including planetary formation and asteroid impact sites, the formation of interstellar dust clouds, ballistic penetrators, spacecraft shielding and ductility in high-performance ceramics. At the lattice level, the basic mechanisms of plastic deformation are twinning (whereby crystallites with a mirror-image lattice form) and slip (whereby lattice dislocations are generated and move), but determining which of these mechanisms is active during deformation is challenging. Experiments that characterized lattice defects have typically examined the microstructure of samples after deformation, and so are complicated by post-shock annealing and reverberations. In addition, measurements have been limited to relatively modest pressures (less than 100 gigapascals). In situ X-ray diffraction experiments can provide insights into the dynamic behaviour of materials, but have only recently been applied to plasticity during shock compression and have yet to provide detailed insight into competing deformation mechanisms. Here we present X-ray diffraction experiments with femtosecond resolution that capture in situ, lattice-level information on the microstructural processes that drive shock-wave-driven deformation. To demonstrate this method we shock-compress the body-centred-cubic material tantalum-an important material for high-energy-density physics owing to its high shock impedance and high X-ray opacity. Tantalum is also a material for which previous shock compression simulations and experiments have provided conflicting information about the dominant deformation mechanism. Our experiments reveal twinning and related lattice rotation occurring on the timescale of tens of picoseconds. In addition, despite the common association between twinning and strong shocks, we find a transition from twinning to dislocation-slip-dominated plasticity at high pressure (more than 150 gigapascals), a regime that recovery experiments cannot accurately access. The techniques demonstrated here will be useful for studying shock waves and other high-strain-rate phenomena, as well as a broad range of processes induced by plasticity.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.