Tissue engineering has emerged as a viable approach to treat disease or repair damage in tissues and organs. One of the key elements for the success of tissue engineering is the use of a scaffold serving as artificial extracellular matrix (ECM). The ECM hosts the cells and improves their survival, proliferation, and differentiation, enabling the formation of new tissue. Here, we propose the development of a class of protein/polysaccharide-based porous scaffolds for use as ECM substitutes in cardiac tissue engineering. Scaffolds based on blends of a protein component, collagen or gelatin, with a polysaccharide component, alginate, were produced by freeze-drying and subsequent ionic and chemical crosslinking. Their morphological, physicochemical, and mechanical properties were determined and compared with those of natural porcine myocardium. We demonstrated that our scaffolds possessed highly porous and interconnected structures, and the chemical homogeneity of the natural ECM was well reproduced in both types of scaffolds. Furthermore, the alginate/gelatin (AG) scaffolds better mimicked the native tissue in terms of interactions between components and protein secondary structure, and in terms of swelling behavior. The AG scaffolds also showed superior mechanical properties for the desired application and supported better adhesion, growth, and differentiation of myoblasts under static conditions. The AG scaffolds were subsequently used for culturing neonatal rat cardiomyocytes, where high viability of the resulting cardiac constructs was observed under dynamic flow culture in a microfluidic bioreactor. We therefore propose our protein/polysaccharide scaffolds as a viable ECM substitute for applications in cardiac tissue engineering. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 769-781, 2018.
Bioartificial polymeric materials, based on blends of polysaccharides with synthetic polymers such as poly(vinyl alcohol) (PVA) and poly(acrylic acid) (PAA), were prepared as films or hydrogels. The physico-chemical, mechanical, and biological properties of these materials were investigated by different techniques such as differential scanning calorimetry, dynamic mechanical thermal analysis, scanning electron microscopy, and in vitro release tests, with the aim of evaluating the miscibility of the polymer blends and to establish their potential applications. The results indicate that while dextran is perfectly miscible with PAA, dextran/PVA, chitosan/PVA, starch/PVA, and gellan/PVA blends behave mainly as two-phase systems, although interactions can occur between the components. Cross-linked starch/PVA films could be employed as dialysis membranes: they showed transport properties comparable to, and in some cases better than, those of currently used commercial membranes. Hydrogels based on dextran/PVA and chitosan/PVA blends could find applications as delivery systems. They appeared able to release physiological amounts of human growth hormone, offering the possibility to modulate the release of the drug by varying the content of the biological component.
Scaffolds for cardiac patch application must meet stringent requirements such as biocompatibility, biodegradability, and facilitate vascularization in the engineered tissue. Here, a bioactive, biocompatible, and biodegradable electrospun scaffold of poly(glycerol sebacate)-poly(ε-caprolactone) (PGS-PCL) is proposed as a potential scaffold for cardiac patch application. The fibers are smooth bead free with average diameter = 0.8 ± 0.3 μm, mean pore size = 2.2 ± 1.2 μm, porosity = 62 ± 4%, and permeability higher than that of control biological tissue. For the first time, bioactive PGS-PCL fibers functionalized with vascular endothelial growth factor (VEGF) are developed, the approach used being chemical modification of the PGS-PCL fibers followed by subsequent binding of VEGF via amide bonding. The approach results in uniform immobilization of VEGF on the fibers; the concentrations are 1.0 μg cm(-2) for the PGS-PCL (H) and 0.60 μg cm(-2) for the PGS-PCL (L) samples. The bioactive scaffold supports the attachment and growth of seeded myogenic and vasculogenic cell lines. In fact, rat aortic endothelial cells also display angiogenic features indicating potential for the formation of vascular tree in the scaffold. These results therefore demonstrate the prospects of VEGF-functionalized PGS-PCL fibrous scaffold as promising matrix for cardiac patch application.
Poly(vinyl alcohol) hydrogels prepared by freeze-thawing procedure represent synthetic systems widely investigated as non-biodegradable scaffolds for tissue regeneration. In order to improve the biocompatibility properties of pure poly(vinyl alcohol) (PVA) hydrogels, blends of PVA with different biological macromolecules, such hyaluronic acid, dextran, and gelatin were prepared and used to produce "bioartificial hydrogels". The porosity characteristics of these hydrogels were investigated by scanning electron microscopy and mercury intrusion porosimetry. The morphology of bioartificial hydrogels was evaluated and compared with that of pure PVA hydrogels. In particular the effect exerted by each biological component on pore size and distribution was investigated. The obtained results indicate that when a natural macromolecule is added to PVA the internal structure of the material changes. A small amount of biopolymer induces the structural elements of PVA matrix to take on a well evident lamellar appearance and an apparent preferential orientation. Comparing the results of SEM and mercury intrusion porosimetry it was concluded that hydrogels containing 20% of biological component have the most regular structure and at the same time the lowest total porosity. On the contrary samples with the highest content of natural polymer (40%) show the less regular structure and the highest total porosity.
ABSTRACT:The interactions between soluble collagen (C) from calf skin and poly-(acrylic acid) (PAA) were studied. Mixing aqueous solutions of collagen and PAA, at various pH values (2.5-4), leads to the formation of complexes that precipitate in the form of insoluble aggregates. The effects of mixture composition, pH, and ionic strength on C/PAA complex formation were investigated by gravimetric, turbidimetric, and conductometric analysis. The experimental results indicate that the complexes form through electrostatic interactions. Homogeneous solid films with variable C/PAA ratios were obtained by casting from solutions in which the pH was adjusted just over the isoelectric point of collagen, thus avoiding the attractive ionic interactions responsible for the complexation of collagen and PAA molecules. A relevant result obtained is related to the possibility of restoring the ionic interactions between the two polymers inside the solid films. Mixture composition and pH appear to influence the thermal properties of both complexes and films.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.