Biofilm is a structured community of microorganisms adhering to surfaces of various polymeric materials used in food packaging. Microbes in the biofilm may affect food quality. However, the presence of biofilm can ensure biodegradation of discarded packaging. This work aims to evaluate a biofilm formation on the selected biodegradable polymer films: poly (lactic acid) (PLA), poly (butylene adipate-co-terephthalate) (PBAT), and poly (butylene succinate) (PBS) by selected bacterial strains; collection strains of Escherichiacoli, Staphylococcusaureus; and Bacillus pumilus, Bacillussubtilis, Bacillustequilensis, and Stenotrophomonasmaltophilia isolated from dairy products. Three different methods for biofilm evaluation were performed: the Christensen method, 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay, and fluorescence microscopy. High biofilm formation was confirmed on the control PBS film, whereas low biofilm formation ability was observed on the PLA polymer sample. Furthermore, the films with incorporated antimicrobial compounds (thymol or eugenol) were also prepared. Antimicrobial activity and also reduction in biofilm formation on enriched polymer films were determined. Therefore, they were all proved to be antimicrobial and effective in reducing biofilm formation. These films can be used to prepare novel active food packaging for the dairy industry to prevent biofilm formation and enhance food quality and safety in the future.

This study was conducted to determine the effect of 1-stage homogenization (OSH) and 2-stage homogenization (TSH) and the addition of polysaccharides [κ-carrageenan (CR) or furcellaran (FR) at levels ranging from 0.000 to 1.000% (wt/wt)] on the physicochemical, viscoelastic, and mechanical vibration damping properties of processed cheese sauces (PCS) after 30 d of storage (6 ± 2°C). The basic chemical properties (pH, dry matter content) were similar for all tested samples. Viscoelastic measurements indicated that PCS rigidity was directly proportional to increasing CR or FR concentration and to the application of homogenization. The interactions between the application of homogenization and the concentration of polysaccharides used were also significant. Compared with OSH, TSH did not lead to any further increase in the rigidity. The preceding results were also supported by data obtained from a nondestructive method of mechanical vibration damping. No changes in water activity were observed in any PCS sample. Overall, the addition of FR or CR appeared to be highly suitable for increasing the emulsion stability of PCS. If PCS products with softer consistency are desired, then a concentration of CR/FR ≤0.250% (wt/wt) could be recommended together with OSH/TSH. For products for which a firmer PCS consistency is required, the addition of CR in concentrations of ≥0.500% (wt/wt) or FR in concentrations of ≥1.000% (wt/wt) together with OSH is recommended. Finally, as the concentration of polysaccharides increased, a darker PCS color was observed.

The scope of this work was to evaluate the development of selected physicochemical parameters (free acidity, peroxide value and specific extinction coefficients in ultraviolet) of extra virgin olive oil, commercialized in the Czech market and stored for a time period of 5 months (at 20 ±5 °C). The tested extra virgin olive oil samples were stored under conditions simulating domestic and commercial storage environment, in which the impact of light and headspace volume were also examined. Moreover, all the analyzed samples fell within the established "extra virgin olive oil category", thus proving their legitimacy, authentication and excellent quality. Furthermore, all the monitored physicochemical parameters were affected by the progress of the storage period, the rising volume of headspace (due to more available oxygen in the container) and exposition to light, resulting in decreasing quality of the examined extra virgin olive oil samples. In addition, the storage of extra virgin olive oil samples in dark containers reported sufficient resistance to oxidation processes up to a period of 3 months, however, after this period signs of oil quality deterioration were reported. Nevertheless, if exposition to light occurred, accelerated decrease in the quality of the extra virgin olive oil samples was observed.

The viscoelastic properties of processed cheese spread (PCS; dry matter 40% w/w, fat in dry matter 55% w/w) produced with various levels (0.10, 0.25, 0.50, 0.75 and 1.00% w/w) of two types of furcellaran (FA or FB), with and without the use of emulsifying salts (ES), were evaluated. The incremental higher levels of furcellaran application, irrespective of its type, increased the values of viscoelastic moduli. Processed cheese spread samples produced without the addition of ES showed higher rigidity. The type and concentration of furcellaran, the presence/absence of ES and storage time had a significant effect on the viscoelastic properties of PCS.

No abstract