Purpose This paper aims to present a new method of real-time monitoring of thermal profiles applied in vapour phase soldering (VPS) reflow processes. The thermal profile setting is a significant variable that affects the quality of joints. The method allows rapid achievement of a required thermal profile based on software control that brings new efficiency to the reflow process and enhanced joint quality, especially for power electronics. Design/methodology/approach A real-time monitoring system based on computerized heat control was realized in a newly developed laboratory VPS chamber using a proportional integral derivation controller within the soldering process. The principle lies in the strictly accurate monitoring of the real defined reflow profile as a reference. Findings Very accurate maintenance of the required reflow profile temperature was achieved with high accuracy (± 2°C). The new method of monitoring and control of the reflow real-time profiling was verified at various maximal reflow temperatures (230°C, 240°C and 260°C). The method is feasible for reflowing three-dimensional (3D) power modules that use various types of solders. The real-time monitoring system based on computerised heat control helped to achieve various heights of vapour zone. Originality/value The paper describes construction of a newly developed laboratory-scale VPS chamber, including novel real-time profiling of the reflow process based on intelligent continuously measured temperatures at various horizontal positions. Real-time profiling in the laboratory VPS chamber allowed reflow soldering on 3D power modules (of greater dimensions) by applying various flux-less solder materials.
Purpose The purpose of this paper is to investigate measurement and regulation of saturated vapour height level in vapour phase soldering (VPS) chamber based on parallel plate capacitor and retaining a stable saturated vapour level above the boiling fluid, regardless of the quantity and size of assembled components. Design/methodology/approach Development and realisation of capacitance sensor that sensitively senses the maximum height level of saturated vapour above the boiling fluid in the VPS chamber was achieved. Methodology of measurement is based on capacitor change from single air to a parallel plate, filled with two dielectric environments in a stacked configuration: condensed fluid and vapour (air). Findings An easy air plate capacitor immersed in the saturated vapour above the boiling fluid can serve as a parallel plate capacitor owing to the conversion of the air to the parallel plate capacitor. A thin film of fluid between the two capacitor plates corresponds to the height of the saturated vapour, which changes the capacity of the parallel plate capacitor. Originality/value Introducing the capacitive sensor directly into the VPS work space allows to achieve a constant height level of saturated vapour. Based on the capacity change, it is possible to control the heating power. There is a lack of information regarding measurement of stable height of vapour in the industry, and the present article shows how to easily improve the way to regulate the bandwidth of saturated vapour in the VPS process.
Abstract. The goal of the study is to compare quality of lead-free vapour phase reflowed solder joints soldered on different printed circuit board (PCB) surface finishes. The solder joints quality comparison is based on evaluation of microstructure development of the solder, solder/PCB pad interface and on the measurement of the solder joints nonlinearity of the current-voltage (C-V)characteristics. The microstructure is evaluated before and after accelerated ageing.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.