The results suggested that: (a) both techniques may effectively improve the deficit of vertically resorbed edentulous ridges; (b) survival and success rates of implants placed in the reconstructed/distracted areas are consistent with those of implants placed in native bone.
This study assesses in vivo the surface roughness necessary to reduce plaque colonization on titanium after 24 hours. Three groups of 16 titanium disks were assigned to 3 different polishing groups (A, B, and C). The roughness was evaluated with a laser profilometer and the morphology with a scanning electron microscope (SEM). Eight volunteers were enrolled and two Stents were applied in the mandibular posterior region of each. Each Stent supported 3 disks, one per group. The volunteers suspended oral hygiene for 24 hours, after which the Stents were removed; one was processed for evaluation of the adherent biomass and the other for SEM study. On each specimen a global area of 100 × 125 μm was examined with SEM. The area was composed of five 20 × 25 μm randomly selected fields. For each field the density of bacteria and the morphotypes were recorded. The data quoted for the global area are cumulative of those observed in the 20 × 25 μm fields. Group A had a significantly smoother surface than groups B and C. The adherent microbial biomass determination and SEM evaluation revealed that group A contained less bacteria than the roughest group. The bacterial population was composed of cocci in group A, and of cocci and short and long rods in groups B and C. We conclude that a titanium surface with Ra ≤ 0.088 μm and Rz < 1.027 μm strongly inhibits accumulation and maturation of plaque at the 24‐hour time period and that such smoothness can be achieved in transgingival and healing implant components. J Periodontol 1997;68:556–562.
The purpose of this prospective study was to compare vertical guided bone regeneration (GBR) and vertical distraction osteogenesis (DO) for their ability in correcting vertically deficient alveolar ridges and their ability in maintaining over time the vertical bone gain obtained before and after implant placement. Eleven patients (group 1) were treated by means of vertical GBR with autogenous bone and e-PTFE membranes, while 10 patients (group 2) were treated by means of DO. In group 1, six patients received implants at the time of GBR (subgroup 1A), while five patients had implants placed at the time of membrane removal (subgroup 1B). In group 2, implants were placed at the time of distraction device removal. A total of 25 implants were placed in group 1 and 34 implants were placed in group 2 patients. Three to 5 months after implant placement, patients were rehabilitated with implant-borne dental prostheses. The following parameters were evaluated: (a) bone resorption of the regenerated ridges before and after implant placement; (b) peri-implant clinical parameters 1, 2, and 3 years after prosthetic loading of implants; (c) survival and success rates of implants. Bone resorption values before and after implant placement were significantly higher in group 1. The results suggested that both techniques may improve the deficit of vertically resorbed edentulous ridges, although distraction osteogenesis seems to be more predictable as far as the long-term prognosis of vertical bone gain is concerned. Implant survival rates as well as peri-implant clinical parameters do not differ significantly between the two groups, whereas the success rate of implants placed in group 2 patients was higher than that obtained in group 1 patients.
Bacterial infections represent nowadays the major reason of biomaterials implant failure, however, most of the available implantable materials do not hold antimicrobial properties, thus requiring antibiotic therapy once the infection occurs. The fast raising of antibiotic-resistant pathogens is making this approach as not more effective, leading to the only solution of device removal and causing devastating consequences for patients. Accordingly, there is a large research about alternative strategies based on the employment of materials holding intrinsic antibacterial properties in order to prevent infections. Between these new strategies, new technologies involving the use of carbon-based materials such as carbon nanotubes, fullerene, graphene and diamond-like carbon shown very promising results. In particular, graphene-and graphene-derived materials (GMs) demonstrated a broad range antibacterial activity toward bacteria, fungi and viruses. These antibacterial activities are attributed mainly to the direct physicochemical interaction between GMs and bacteria that cause a deadly deterioration of cellular components, principally proteins, lipids, and nucleic acids. In fact, GMs hold a high affinity to the membrane proteoglycans where they accumulate leading to membrane damages; similarly, after internalization they can interact with bacteria RNA/DNA hydrogen groups interrupting the replicative stage. Moreover, GMs can indirectly determine bacterial death by activating the inflammatory cascade due to active species generation after entering in the physiological environment. On the opposite, despite these bacteria-targeted activities, GMs have been successfully employed as pro-regenerative materials to favor tissue healing for different tissue engineering purposes. Taken into account these GMs biological properties, this review aims at explaining the antibacterial mechanisms underlying graphene as a promising material applicable in biomedical devices.
A new method for altered enamel surface remineralization has been proposed . To this aim carbonate-hydroxyapatite nanocrystals which mimic for composition, structure, nanodimensions, and morphology dentine apatite crystals and resemble closely natural apatite chemical-physical properties have been used The results underline the differences induced by the use of fluoride ions and hydroxyapatite nanocrystals in contrasting the mechanical abrasions and acid attacks to which tooth enamel is exposed. Fluoride ions generate a surface modification of the natural enamel apatite crystals increasing their crystallinity degree and relative mechanical and acid resistance. On the other hand, the remineralization produced by carbonate-hydroxyapatite consists in a deposition of a new apatitic mineral into the eroded enamel surface scratches. A new biomimetic mineral coating, which progressively fills and shadows surface scratches, covers and safeguards the enamel structure by contrasting the acid and bacteria attacks.
Nanosized drug carriers functionalized with moieties specifically targeting tumor cells are promising tools in cancer therapy, due to their ability to circulate in the bloodstream for longer periods and their selectivity for tumor cells, enabling the sparing of healthy tissues. Because of its biocompatibility, high bioresorbability, and responsiveness to pH changes, synthetic biomimetic nanocrystalline apatites are used as nanocarriers to produce multifunctional nanoparticles, by coupling them with the chemotherapeutic drug doxorubicin (DOXO) and the DO-24 monoclonal antibody (mAb) directed against the Met/Hepatocyte Growth Factor receptor (Met/HGFR), which is over-expressed on different types of carcinomas and thus represents a useful tumor target. The chemical-physical features of the nanoparticles are fully investigated and their interaction with cells expressing (GTL-16 gastric carcinoma line) or not expressing (NIH-3T3 fibroblasts) the Met/HGFR is analyzed. Functionalized nanoparticles specifically bind to and are internalized in cells expressing the receptor (GTL-16) but not in the ones that do not express it (NIH-3T3). Moreover they discharge DOXO in the targeted GTL-16 cells that reach the nucleus and display cytotoxicity as assessed in an MTT assay. Two different types of ternary nanoparticles are prepared, differing for the sequence of the functionalization steps (adsorption of DOXO first and then mAb or vice versa), and it is found that the ones in which mAb is adsorbed first are more efficient under all the examined aspects (binding, internalization, cytotoxicity), possibly because of a better mAb orientation on the nanoparticle surface. These multifunctional nanoparticles could thus be useful instruments for targeted local or systemic drug delivery, allowing a reduction in the therapeutic dose of the drug and thus adverse side effects. Moreover, this work opens new perspectives in the use of nanocrystalline apatites as a new platform for theranostic applications in nanomedicine.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.