Root-filled teeth that received fiber posts most frequently fail at the adhesive interface between resin cement and dentin. The objective of this study is to evaluate the effect of Er:YAG laser and/or sodium ascorbate (SA) on bond strength, microhardness of dentin, and penetration depth of cement into dentinal tubules. Forty-eight bovine incisor roots were endodontically treated, post spaces were prepared and equally divided into four groups (n = 12): G1-distilled water (control); G2-10% SA (10 min); G3-Er:YAG laser (150 mJ/4 Hz/40 s), and G4-Er:YAG laser + 10% SA. Glass fiber posts were cemented and roots sectioned into slices. In the first slice, the push-out bond strength (MPa) and failures were analyzed by confocal laser scanning microscope (CLSM). The second slice was subjected to microhardness test (KHN) and CLSM to assess the cement penetration. ANOVA and Tukey test were used for bond strength and microhardness data and Kruskal-Wallis and Dunn tests for the cement penetration (α = .05). The SA-treated samples had higher bond strength (10.02 ± 5.45a), similar to Er:YAG laser (9.91 ± 4.62a) and Er:YAG laser + SA (8.09 ± 4.07a). The least values (P < .05) were found on control (4.02 ± 2.39b). Significant differences were observed on root thirds (P < .05): cervical > middle > apical. There was a predominance of adhesive failures. The microhardness test revealed no differences between groups (P > .05). The experimental groups (G2, G3, and G4) had highest penetration into dentinal tubules when compared to the control (G1). Dentin pretreatments with Er:YAG laser or SA improved bond strength of cement-post-dentin interfaces; however, no synergistic effect of both treatments combined was observed.

Background. Extracted human teeth are used to simulate dental procedures and are essential for practical education and research studies.Objectives. The aim of this study was to evaluate the efficacy of different sterilization methods for extracted human roots and to assess the effects of these methods on dentin microhardness. Material and methods.The crowns of 40 mandibular incisors were removed. The roots were sectioned at 10 mm and divided into 4 groups (n = 10 per group): G1 -no sterilization (control); G2 -microwave radiation (650 W, 5 min); G3 -ethylene oxide (288°C, 3 h); and G4 -autoclave (121°C, 15 min). The roots were immersed in brain heart infusion (BHI) and incubated at 37°C in variable oxygen atmospheres. After 14 days, the samples were assessed for turbidity. Three slices were obtained from each root, and indentations were made at 30, 60 and 120 µm from the root canal lumen. The microbiological data was analyzed with the Kruskal-Wallis test and Dunn's post-hoc test. Microhardness was evaluated by means of the twoway analysis of variance (ANOVA) and Tukey's test (p < 0.05).Results. The roots submitted to autoclaving were 100% sterile, which differed from the other methods (p < 0.05); the control specimens had 0% sterility. For microhardness, significant differences were found between the methods, particularly for the apical third (68.06 ±12.50) (p < 0.05).Conclusions. Although all the evaluated techniques reduced dentin microhardness, autoclaving should be used as the most reliable method of sterilization of extracted dental roots.

No abstract

No abstract

No abstract

No abstract

This study evaluated the drilling path (mm) and the dentin wear (mm3) of two instruments used during guided endodontic access. Twenty mandibular incisors with calcified canals were selected using cone‐beam computed tomography (CBCT) and fixed in articulated models. Preoperative CBCT scans were performed in combination with intraoral scanning, and the images were reconstructed in the Blue Sky Bio software for access planning and printing the guides. The access cavity was drilled with 1.0‐mm‐diameter bur (DSP) and 0.8‐mm‐diameter bur (Munce). Postoperative CBCT was performed, and the images obtained preoperative and postoperative were superimposed for the analyses. Data were analysed by a t‐test and linear regression (α = 0.05). No difference was found in the drilling path (p = 0.422). However, the Munce bur had higher dentin wear than the DSP bur (p = 0.011). A positive linear correlation (R2 = 0.859) was found between the factors.

minha orientadora, por exercer papel fundamental na minha formação. Agradeço a confiança a mim depositada, toda dedicação, carinho e ensinamentos transmitidos e por incentivarme e apoiar-me em todos os momentos.