Abstract-Flyback is one of high voltage generation methods using a low voltage source. This method has a simple circuit, which consists of two main components for generating the high voltage. In this study, flyback method is used to generate high voltage on plasma electrolytic oxidation (PEO) application. PEO is a process that combine electrochemical oxidation process and high voltage spark. This application needs high voltage to produce plasma. The plasma is used to form a new surface coating on metal. Flyback circuit is succesfully simulated on LTSpice IV. Voltage value and waveform on simulation has been observed and compared with the real one. The measured and observed part is IGB gate, output voltage of transformer before diode, and load voltage after diode. Flyback effect and waveform on simulation has the similiar result with the real one. A 10 volt input voltage can produce output voltage on the average of 1 kilovolt. Therefore, flyback simulation is able to represent flyback ability on real circuit for generating high voltage which can be used on high voltage generation for PEO application.Intisari-Metode flyback merupakan salah satu metode pembangkitan tegangan tinggi dengan sumber tegangan rendah. Metode ini memiliki rangkaian yang sederhana. Rangkaian flyback hanya memiliki dua komponen utama untuk membangkitkan tegangan tinggi. Pada makalah ini, digunakan metode flyback untuk merancang pembangkitan tegangan tinggi pada aplikasi plasma electrolytic oxidation (PEO). PEO merupakan suatu proses kombinasi dari sebuah proses oksidasi elektrokimia dan penerapan percikan (spark) tegangan tinggi. Aplikasi PEO membutuhkan tegangan tinggi untuk menghasilkan plasma. Plasma pada proses tersebut digunakan untuk membentuk lapisan permukaan baru pada sebuah permukaan metal. Rangkaian flyback yang disimulasikan dengan LTSpice IV berhasil dilakukan. Nilai tegangan dan bentuk geombang pada simulasi telah diamati dan dibandingkan dengan pengujian rangkaian flyback yang dibuat. Tiga titik yang diukur dan diamati pada simulasi dan pengujian adalah tegangan pada gate IGBT, tegangan keluaran transformator sebelum diode, dan tegangan pada beban setelah diode. Efek flyback yang terjadi dan bentuk gelombang yang dihasilkan simulasi mendekati hasil pengujian. Dengan sumber tegangan pulsa 10 volt, rangkaian ini menghasilkan tegangan keluaran rata-rata 1 kilovolt. Dengan demikian, simulasi flyback mampu merepresentasikan kemampuan rangkaian flyback yang telah dibuat untuk menghasilkan tegangan tinggi, sehingga metode flyback dapat digunakan pada pembangkitan tegangan tinggi untuk aplikasi PEO.Kata Kunci-flyback, tegangan tinggi, plasma, plasma elecrolytic oxidation, PEO.I. PENDAHULUAN Pada umumnya, pembangkitan tegangan tinggi dilakukan dengan rangkaian yang berukuran besar dan rumit. Seiring berkembangnya penelitian tentang pengaplikasian tegangan tinggi di segala bidang saat ini, dibutuhkan rangkaian yang lebih sederhana untuk dapat membangkitkan tegangan tinggi. Rangkaian yang lebih sederhana dapat memudahkan penelitian di la...
Konsleting listrik atau hubung singkat menjadi penyebab utama dalam kebakaran rumah atau bangunan. Salah satu yang rawan terjadi kebakaran adalah bangunan pondok pesantren. Belum adanya pengetahuan tentang standar instalasi listrik yang baik dan benar yang dipahami oleh para santri dan pengasuh pondok menyebabkan kebakaran pondok ini rawan terjadi. Penggunaan kabel listrik yang sudah rusak atau penggunaan kabel listrik yang ukurannya terlalu kecil sebagai salah satu penyebab kebakaran. Agar tidak terjadi kebakaran pondok maka diperlukan penerapan standar instalasi listrik yang baik dan benar. Penerapan standar instalasi listrik yang baik dan benar diterapkan pada instalasi listrik bangunan gazebo di pondok pesantren Al Mujaddadiyyah. Para santri dan pengelola pondok dapat memahami cara menggunakan instalasi listrik yang benar. Penerapan standar instalasi listrik ini dapat meminimalisir kebakaran di pondok pesantren dengan cara penggunaan peralatan listrik yang sesuai standar dan pemberian wawasan tentang instalasi listrik kepada para santri dan pengelola pondok.
Analisis Markov Model merupakan suatu model probabilistik berbentuk khusus yang umumnya dinamakan Stochastic process atau proses perubahan probabilistik yang terjadi secara terus menerus. Metode tersebut digunakan untuk menganalisis kemungkinan terjadinya gangguan di tahun berikutnya (2021 dan 2022). Keandalan penyulang dinilai berdasarkan durasi dan frekuensi gangguan. Proses analisis mengacu pada data gangguan penyulang tahun 2018-2020 menggunakan Markov Model. Hasil analisis digunakan untuk menentukan upaya-upaya peningkatan keandalan penyulang. Pada tahun 2021 diperkirakan 70,59% Penyulang Mojolegi mengalami gangguan setiap bulannya dengan 29,41% gangguan level G. Sedangkan di tahun 2022 persentase gangguan naik 1,07% dari tahun sebelumnya dengan level gangguan G sebesar 28,63%. Hal tersebut menggambarkan Penyulang Mojolegi masih rawan terjadi gangguan dan mengalami kenaikan persentase gangguan disetiap tahunya. Pada tahun 2021 diperkirakan 11,43% Penyulang Gading mengalami gangguan setiap bulannya dengan 25,00% gangguan level G. Sedangkan persentase gangguan di tahun 2022 konsisten sebesar 11,43 dengan level gangguan G sebesar 25,00%. Hal tersebut menggambarkan Penyulang Gading masih dalam koridor aman dari gangguan dan mengalami bernilai konstan disetiap tahunnya. Dari hasil analisis didapatkan daerah rawan gangguan dengan penyebab gangguannya. Dalam menyikapi hal tersebut PT PLN (Persero) ULP Mojoagung dapat memfokuskan pemeliharaan jaringan distribusi pada daerah yang rawan gangguan. Upaya peningkatan keandalan untuk Penyulang Mojolegi dapat difokuskan pada section V. Upaya peningkatan keandalan untuk Penyulang Gading dapat difokuskan pada section II. Hal tersebut bertujuan untuk meningkatkan keandalan keandalan penyulang pada PT PLN (Persero) ULP Mojoagung.
Gangguan tegangan lebih pada jaringan listrik umumnya disebabkan oleh dua macam tegangan transient yang berasal dari luar atau dari dalam sistem itu sendiri. Jenis gangguan dari luar ini biasanya disebabkan oleh sambaran petir. Gangguan tegangan lebih yang berasal dari petir dapat menjadi ancaman berbahaya bagi jaringan listrik, instalasi listrik dan peralatan listrik.. Tegangan impuls yang dibawa oleh petir memiliki amplitudo sangat besar. Pada skala laboratorium, tegangan impuls dapat dibangkitkan hingga 1000 kV. Gelombang tegangan tinggi impuls yang dihasilkan oleh generator impuls memiliki karakteristik durasi yang pendek antara mikro detik hingga beberapa puluh mikro detik. Perancangan simulasi pembangkitan tegangan tinggi impuls dengan rangkaian generator impuls RLC dilakukan dengan tujuan untuk menyimulasikan tegangan lebih yang berasal dari surja petir. Profil tegangan yang dihasilkan diamati dan dianalisa. Rangkaian generator impuls RLC disimulasikan dengan dua variasi tegangan keluaran yang berbeda, yaitu 1 kV dan 10 kV. Profil tegangan yang dihasilkan oleh generator impuls RLC dengan tegangan keluaran 1kV dan 10 kV memiliki bentuk yang mirip dengan profil tegangan generator impuls RLC yang ada pada standar IEC 61000-4-5. Hal ini menunjukkan bahwa rangkaian generator impuls RLC yang disimulasikan berhasil dijalankan sesuai standar.
The actions for electricity consumption more efficiently is reducing the amount of electricity consumption of renewable and non renewable energy for human living sustainability or we can called energy conservation. Energy audit purposed to the energy utilization evaluation progress, is still infrequently applied in Indonesia, especially in huge building. The analyzing result of A building in the Dr. Radjiman Wediodiningrat Asylum, the first value audit of Energy Use Intensity (EUI) is 21,944 kwh/m2/year it was include the criteria of efficient. This EUI value is below EUI research that was issued by ASEAN-USAID in 1992 and the EUI value average of hospital in Korea, while detailed audit obtained energy value of EUI is 23,213 kWh/m2/year is included to the criteria of efficient. The THDi value in electricity system is IR= 33,2%, IS=24,48%, IT= 34,85% and IN=122,96%, the THDi value is not complied with IEEE 519-2014 permission which is the value is ISC/IL> 1000 has restraint value by 20%. Whereas the THDv value in electricity system is VR-S= 2,04%, VS-T= 2,11%, VT-R= 1,97%, VR-N= 3,83%, VS-N= 3,69%, VT-N= 3,73% and VL-L= 2,04% and VL-N= 3,75%, the value of THDv is complied the permissiod by IEEE 519-2014 with Voltage system of identification by 0,4 kV, therefore the limit value of THDV which permitted is 8%.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.