The aim of the article is to analyze the structure and mechanical properties in terms of the cracking mechanics of geopolymer composites based on fly ash and river sand, as well as metakaolin and river sand with three types of reinforcement material: glass fiber, carbon fiber, and aramid fiber, in terms of their use in additive manufacturing. Geopolymer composites were reinforced with fibers in a volume ratio of 0.5%, 1.0%, and 2.0%. Subsequently, these samples were subjected to bending strength tests in accordance with the European standard EN 12390-3. The addition of fibers significantly improved the bending strength of all composites made of metakaolin and sand. The reinforcement with aramid fiber in the amount of 2.0% resulted in more than a 3-fold increase in strength compared to the reinforcement-free composites. An analysis of the morphology of the fibers was carried out on the basis of photos taken from an electron microscope. The correct addition of fibers changes the nature of the fracture from brittle to more ductile and reduces the number of cracks in the material.

Hydroxyapatite (HAp) is a bioactive ceramic with great potential for the regeneration of the skeletal system. However, its mechanical properties, especially its brittleness, limit its application. Therefore, in order to increase its ability to transmit stresses, it can be combined with a polymer phase, which increases its strength without eliminating the important aspect of bioactivity. The presented work focuses on obtaining organic–inorganic hydrogel materials based on whey protein isolate (WPI) reinforced with nano-HAp powder. The proportion of the ceramic phase was in the range of 0–15%. Firstly, a physicochemical analysis of the materials was performed using XRD, FT-IR and SEM. The hydrogel composites were subjected to swelling capacity measurements, potentiometric and conductivity analysis, and in vitro tests in four liquids: distilled water, Ringer’s fluid, artificial saliva, and simulated body fluid (SBF). The incubation results demonstrated the successful formation of new layers of apatite as a result of the interaction with the fluids. Additionally, the influence of the materials on the metabolic activity according to ISO 10993-5:2009 was evaluated by identifying direct contact cytotoxicity towards L-929 mouse fibroblasts, which served as a reference. Moreover, the stimulation of monocytes by hydrogels via the induction of nuclear factor (NF)-κB was investigated. The WPI/HAp composite hydrogels presented in this study therefore show great potential for use as novel bone substitutes.

The additive manufacturing technologies are fast-developing industrial sector and, potentially, a ground-breaking technology. They have many advantages such as the saving of resources and energy efficiency. However, the full exploitation of 3D printing technology for ceramic materials is currently limited; a lot of research is being conducted in this area. A promising solution seems to be geopolymers, but its application requires a better understanding of the behaviour this group of materials. This article analyses the influence of microstructure on mechanical properties whilst taking the production method into consideration. The paper is based on comparative analysis – the investigation is focused on the influence of material structure on the mechanical properties and fracture mechanism of these kinds of composites, including those reinforced with different kind of fibres. As a raw material for the matrix, fly ash from the Skawina coal power plant (located in: Skawina, Lesser Poland, Poland) was used. The investigation was made by SEM analysis. The results show that the microstructural analysis did not sufficiently explain the underlying reasons for the observed differences in the mechanical properties of the composites.

No abstract

The exposure of winter triticale to cold promotes genotype-dependent resistance to fungal pathogen. We present the evidence that structural and chemical modifications of the cell wall components induced by cold can be correlated with the resistance against fungal infection. Our results showed that cellulose of hardened triticale cv. Hewo (able to develop resistance after cold treatment) has more compact and integrated structure, thicker and longer fibres when compared to cv. Magnat (susceptible to fungal infection despite plant hardening). Such structure of cellulose limits water sorption, favours stronger bonding the water of crystallisation to macromolecules, impedes depolymerisation process during decomposition, and finally results in higher thermal stability of cell wall. Furthermore, the lignin composition is drastically modified in resistant plants. Pattern of the thermal decomposition indicates higher molecular mass and more complex structure of lignin, followed by the higher thermal stability. We conclude that specific structure of lignocellulosic cell wall of the resistant plants forms a barrier for fungal enzymes digesting host tissue as well as can resist better the mechanical pressure of hyphae.

No abstract

No abstract

No abstract