The effects of etch time, nitrogen and chlorine gas flows, radio frequency power, pressure, and temperature on the etch rate of sputtered titanium films in chlorine‐nitrogen plasmas were investigated in this work. The radio frequency power was found to have the greatest effect on the etch rate, followed by the reaction pressure. The increase in Ti etch rate with radio frequency power can be attributed to increased ionization of the gases and increase in ion and electron energies in the plasma. The increase in pressure led to a decline in the etch rate, probably due to loss of chlorine through recombination reactions. It was observed that the etch rate increased with increase in chlorine for gas flows below 100 sccm. Addition of nitrogen increased the etch rate to a flow of 10 sccm due to generation of free chlorine radicals, but led to a decrease in etch rate for nitrogen flows beyond 25 sccm due to dilution effect. There was only slight dependence of etch rate on the temperature within the range of this investigation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.