Oxide thin-film transistors (TFTs) were fabricated using a polycrystalline In-Ga-O (IGO) thin film as the n-channel active layer by direct current magnetron sputtering. The 50-nm-thick IGO TFT showed a field-effect mobility of 39.1 cm 2 V À1 s À1 , a threshold voltage of 1.4 V, and a subthreshold gate voltage swing of 0.12 V/decade. The polycrystalline IGO thin film showed the cubic bixbyite structure of In 2 O 3 without an obvious preferred orientation. The average grain size of polycrystalline IGO was approximately 10 m. The high mobility of IGO TFT is related to the In 2 O 3 crystalline phase and large grain size of the IGO film. #
Demonstration and characterization of an ambipolar high mobility transistor in an undoped GaAs/AlGaAs quantum well Appl. Phys. Lett. 102, 082105 (2013) Investigation of the charge transport mechanism and subgap density of states in p-type Cu2O thin-film transistors Appl. Phys. Lett. 102, 082103 (2013) Negative gate-bias temperature stability of N-doped InGaZnO active-layer thin-film transistors Appl. Phys. Lett. 102, 083505 (2013) A pH sensor with a double-gate silicon nanowire field-effect transistor Appl. Phys. Lett. 102, 083701 (2013) Extrinsic and intrinsic photoresponse in monodisperse carbon nanotube thin film transistors Appl. Phys. Lett. 102, 083104 (2013) Additional information on Appl. Phys. Lett.
The authors developed an ambipolar field-effect transistor (FET) based on an organic-inorganic hybrid structure that consisted of an indium zinc oxide and pentacene double layer fabricated on a SiO2∕n++-Si substrate. Although the FETs based on an indium zinc oxide or pentacene single layer only showed unipolar FET characteristics, the hybrid FET showed definite ambipolar FET characteristics. The authors obtained a highly saturated field-effect hole and electron mobilities of 0.14 and 13.8cm2∕Vs. Furthermore, the authors demonstrated electroluminescence from hybrid FETs using tetracene as an emitting layer. The authors’ success shows that the hybridization of organic and inorganic materials opens up a new field in electronics.
Amorphous indium–gallium–zinc oxide (a-IGZO) films were deposited by DC magnetron sputtering and post-annealed in air at 300–1000 °C for 1 h to investigate the crystallization behavior in detail. X-ray diffraction, electron beam diffraction, and high-resolution electron microscopy revealed that the IGZO films showed an amorphous structure after post-annealing at 300 °C. At 600 °C, the films started to crystallize from the surface with c-axis preferred orientation. At 700–1000 °C, the films totally crystallized into polycrystalline structures, wherein the grains showed c-axis preferred orientation close to the surface and random orientation inside the films. The current–gate voltage (I
d–V
g) characteristics of the IGZO thin-film transistor (TFT) showed that the threshold voltage (V
th) and subthreshold swing decreased markedly after the post-annealing at 300 °C. The TFT using the totally crystallized films also showed the decrease in V
th, whereas the field-effect mobility decreased considerably.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.