Abstract:We demonstrate mode-division multiplexed WDM transmission over 50-km of few-mode fiber using the fiber's LP 01 and two degenerate LP 11 modes. A few-mode EDFA is used to boost the power of the output signal before a few-mode coherent receiver. A 6×6 time-domain MIMO equalizer is used to recover the transmitted data. We also experimentally characterize the 50-km few-mode fiber and the few-mode EDFA.

No abstract

No abstract

Abstract:We proposed and demonstrated a novel practical fiber Bragg grating (FBG) fabrication setup constructed with high performance linear stages, piezoelectric translation (PZT) stages, and a highly stable continuous wave laser. The FBG fabrication system enables writing of long FBGs by a continuous translate-and-write process and allows implementation of arbitrary chirp and apodization. A key innovation is that the local Bragg wavelength is controlled by a simple movement of the phase mask by a PZT in the direction perpendicular to its surface. The focus position of the two writing beams is not changed during the Bragg wavelength change, an intrinsic feature of the design, ensuring simplicity, robustness and stability. Apodization can be achieved by vibrating the phase mask in the direction parallel to its surface by a PZT. Phase steps can also be inserted in FBGs at any desired locations by stepping the same PZT. A long uniform FBG and a linearly chirped FBG are written to demonstrate the performance of the setup.

Abstract:We have observed symmetrical sidebands in reflection from Bragg grating written in a silica suspended-core fiber, which are caused by longitudinal periodic refractive index modulation in the Ge-doped suspended-core fiber with a core diameter of ~1.3 µm. Our simulation shows that the effective refractive index of the guided mode varied by 0.023% along the fiber with a period of ~650 µm. The periodic index variation can lead to amplitude modulation of fiber Bragg gratings, which can be studied by observing the spectra of a fiber Bragg grating written in the Ge-doped core. In addition, we have also characterized the temperature and strain responses of the fiber Bragg gratings, and showed that both responses in the suspended-core fiber are 20 to 25% lower than that of a fiber Bragg grating written on a conventional fiber. sensor system for simultaneous measurement of quasi-static strain and temperature using discrete wavelet transform," Meas. Sci. Technol. 17(2), 384-392 (2006). ©2010 Optical Society of America