Articles you may be interested inA theory of single-electron non-adiabatic tunneling through a small metal nanoparticle with due account of the strong interaction of valence electrons with phonons of the condensed matter environment

Realistic surgical simulation requires incorporation of the mechanical properties of soft tissue in mathematical models. In actual deformation of soft-tissue during surgical intervention, the tissue is subject to tension, compression, and shear. Therefore, characterization and modeling of soft-tissue in all these three deformation modes are necessary. In this paper we applied two types of pure shear test, unconfined compression and uniaxial tension test to characterize porcine liver tissue. Digital image correlation technique was used to accurately measure the tissue deformation field. Due to gravity and its effect on the soft tissue, a maximum stretching band was observed from the relative strain field on sample undergoing tension and pure shear test. The zero strain state was identified according to the position of this maximum stretching band. Two new constitutive models based on combined exponential/logarithmic and Ogden strain energy were proposed. The models are capable to represent the observed non-linear stress–strain relation of liver tissue for full range of tension and compression and also the general response of pure shear.

We describe the design, fabrication, and characterization of a 1-dimensional silicon photonic crystal cavity with a quality factor-to-mode volume ratio greater than 10(7), which exceeds the highest previous values by an order of magnitude. The maximum of the electric field is outside the silicon in a void formed by a central slot. An extremely small calculated mode volume of 0.0096 (λvac/n)(3) is achieved through the abrupt change of the electric field in the slot, despite which a high quality factor of 8.2 × 10(5) is predicted by simulation. Quality factors up to 1.4 × 10(5) are measured in actual devices. The observation of pronounced thermo-optic bistability is consistent with the strong confinement of light in these cavities.

Advancements in real-time surgical simulation techniques have provided the ability to utilize more complex nonlinear constitutive models for biological tissues which result in increased haptic and graphic accuracy. When developing such a model, verification is necessary to determine the accuracy of the force response as well as the magnitude of tissue deformation for tool-tissue interactions. In this study, we present an experimental device which provides the ability to obtain force-displacement information as well as surface deformation of porcine liver for in vivo probing tasks. In addition, the system is capable of accurately determining the geometry of the liver specimen. These combined attributes provide the context required to simulate the experiment with accurate boundary conditions, whereby the only variable in the analysis is the material properties of the liver specimen. During the simulation, effects of settling due to gravity have been taken into account by a technique which incorporates the proper internal stress conditions in the model without altering the geometry. Initially, an Ogden model developed from ex vivo tension and compression experimentation is run through the simulation to determine the efficacy of utilizing an ex vivo model for simulation of in vivo probing tasks on porcine liver. Subsequently, a method for improving upon the ex vivo model was developed using different hyperelastic models such that increased accuracy could be achieved for the force characteristics compared to the displacement characteristics, since changes in the force variation would be more perceptible to a user in the simulation environment, while maintaining a high correlation with the surface displacement data. Furthermore, this study also presents the probing simulation which includes the capsule surrounding the liver.

Objective-The purpose of this paper is to explore the feasibility of developing a MRI-compatible needle driver system for radiofrequency ablation (RFA) of breast tumors under continuous MRI imaging while being teleoperated by a haptic feedback device from outside the scanning room. The developed needle driver prototype was designed and tested for both tumor targeting capability as well as RFA.Methods-The single degree-of-freedom (DOF) prototype was interfaced with a PHANToM haptic device controlled from outside the scanning room. Experiments were performed to demonstrate MRIcompatibility and position control accuracy with hydraulic actuation, along with an experiment to determine the PHANToM's ability to guide the RFA tool to a tumor nodule within a phantom breast tissue model while continuously imaging within the MRI and receiving force feedback from the RFA tool.Results-Hydraulic actuation is shown to be a feasible actuation technique for operation in an MRI environment. The design is MRI-compatible in all aspects except for force sensing in the directions perpendicular to the direction of motion. Experiments confirm that the user is able to detect healthy vs. cancerous tissue in a phantom model when provided with both visual (imaging) feedback and haptic feedback. Conclusion-The teleoperated 1-DOF needle driver system presented in this paper demonstrates the feasibility of implementing a MRI-compatible robot for RFA of breast tumors with haptic feedback capability. KeywordsMedical robotics; Needle insertion; Radiofrequency ablation (RFA); Haptic feedback; Continuous MRI imaging; Teleoperation 1 Portions reprinted, with permission, from "Kokes, R.; Lister, K.; Gullapalli, R.; Bao Zhang; Richard, H.; Desai, J.P., Towards a needle driver robot for radiofrequency ablation of tumors under continuous

Articles you may be interested inNanostructuring of free-standing, dielectric membranes using electron-beam lithography J. Vac. Sci. Technol. B 31, 06F402 (2013); 10.1116/1.4820019 Nanofabrication of high aspect ratio (∼50:1) sub-10 nm silicon nanowires using inductively coupled plasma etching J.Hard stamp processes for the EVG 620 full field nanoimprint systemWe demonstrate the transfer of sub-10 nm features into nickel using a hard stamp. Nanostructures were transferred directly from diamond and SiC in a single step by pressing the stamp into nickel at room temperature. The patterns were generated using ultrahigh resolution electron beam lithography. Patterns were transferred to the diamond and SiC using RIE etching with an O 2 plasma used for the diamond and a SF 6 +O 2 mixture used for the SiC. Hydrogen Silsesquioxane was used as a resist and served as a mask in the plasma etching.

No abstract

No abstract