No abstract

Seismic isolation is a technique that has been used around the world to protect building structures, nonstructural components and content from the damaging effects of earthquake ground shaking. This paper summarizes current practices, describes widely used seismic isolation hardware, chronicles the history and development of modern seismic isolation through shake table testing of isolated buildings, and reviews past efforts to achieve three-dimensional seismic isolation. The review of current practices and past research are synthesized with recent developments from full-scale shake table testing to highlight areas where research is needed to achieve full seismic damage protection of buildings. The emphasis of this paper is on the application of passive seismic isolation for buildings primarily as practiced in the United States, though systems used in other countries will be discussed.

No abstract

SUMMARY The accuracy of a series spring model to predict the peak displacement and displacement history of Triple Pendulum™ (TP) bearings in a strongly shaken, full‐scale building is evaluated in this paper. The series spring model was implemented as a self‐contained three‐dimensional TP bearing element in OpenSees and is now available for general use. The TP bearing element contains the option for constant friction or a generalized friction model that accounts for the effect of instantaneous velocity and compression load on the friction coefficient. Comparison between numerical simulation and experimental data of a five‐story steel moment frame building shows that the peak displacement of isolation system can generally be predicted with confidence using a constant friction coefficient model. The friction coefficient model accounting for the effect of axial load and velocity leads to minor improvement over the constant friction coefficient models in some cases. Copyright © 2013 John Wiley & Sons, Ltd.

No abstract