Research progress in alkali metal ion (Li+, Na+, K+ and Rb+) doped perovskite solar cells is summarized and evaluated.

Hot-casting is a promising technique of depositing high-quality organic–inorganic hybrid perovskite thin films with large crystal grain size. Here, we reported the that the crystallinity and grain size of perovskite films could be systematically tailored by modulating the stoichiometry of the precursor solution in the hot-casting process under ambient condition with a relative humidity of 40%. It was found that a slight excess of methylammonium iodide (MAI) in the precursor solution could effectively compensate the MAI loss due to the high substrate temperature. A significant increase in the grain size and crystallinity of the perovskite film was observed together with a decrease in defect density and a carrier concentration enhancement in MAI-rich samples. The corresponding devices exhibited a notable increase in fill factor (up to 80.70%) and short-circuit current density. In addition, in MAI-deficient samples, an enrichment of PbI2 at the grain boundaries was directly observed by optical microscopy and laser confocal microscopy. Time-resolved photoluminescence spectroscopy revealed an increase in the charge carrier lifetime in the MAI-deficient samples, which was in line with the previous results with a small amount of excess PbI2 in the perovskite film. This work highlights a new strategy to prepare high-quality perovskite thin films with excellent crystal quality under ambient condition.

Methylamine-induced defect-healing and cationic substitution was reviewed for low defect perovskite films with better crystal quality and high stability.

Organic–inorganic metal halide perovskite solar cells (PSCs) have recently been considered as one of the most competitive contenders to commercial silicon solar cells in the photovoltaic field. The deposition process of a perovskite film is one of the most critical factors affecting the quality of the film formation and the photovoltaic performance. A hot-casting technique has been widely implemented to deposit high-quality perovskite films with large grain size, uniform thickness, and preferred crystalline orientation. In this review, we first review the classical nucleation and crystal growth theory and discuss those factors affecting the hot-casted perovskite film formation. Meanwhile, the effects of the deposition parameters such as temperature, thermal annealing, precursor chemistry, and atmosphere on the preparation of high-quality perovskite films and high-efficiency PSC devices are comprehensively discussed. The excellent stability of hot-casted perovskite films and integration with scalable deposition technology are conducive to the commercialization of PSCs. Finally, some open questions and future perspectives on the maturity of this technology toward the upscaling deposition of perovskite film for related optoelectronic devices are presented.