Wearable antennas have gained much attention in recent years due to their attractive features and possibilities in enabling lightweight, flexible, low cost, and portable wireless communication and sensing. Such antennas need to be conformal when used on different parts of the human body, thus need to be implemented using flexible materials and designed in a low profile structure. Ultimately, these antennas need to be capable of operating with minimum degradation in proximity to the human body. Such requirements render the design of wearable antennas challenging, especially when considering aspects such as their size compactness, effects of structural deformation and coupling to the body, and fabrication complexity and accuracy. Despite slight variations in severity according to applications, most of these issues exist in the context of body-worn implementation. This review aims to present different challenges and issues in designing wearable antennas, their material selection, and fabrication techniques. More importantly, recent innovative methods in back radiations reduction techniques, circular polarization (CP) generation methods, dual polarization techniques, and providing additional robustness against environmental effects are first presented. This is followed by a discussion of innovative features and their respective methods in alleviating these issues recently proposed by the scientific community researching in this field. INDEX TERMSWearable devices, Internet of Things (IoT), wearable antennas, flexible, reconfigurable antennas, energy harvesting for wearable devices, specific absorption rate (SAR).

This work reviews design aspects of liquid metal antennas and their corresponding applications. In the age of modern wireless communication technologies, adaptability and versatility have become highly attractive features of any communication device. Compared to traditional conductors like copper, the flow property and lack of elasticity limit of conductive fluids, makes them an ideal alternative for applications demanding mechanically flexible antennas. These fluidic properties also allow innovative antenna fabrication techniques like 3D printing, injecting, or spraying the conductive fluid on rigid/flexible substrates. Such fluids can also be easily manipulated to implement reconfigurability in liquid antennas using methods like micro pumping or electrochemically controlled capillary action as compared to traditional approaches like high-frequency switching. In this work, we discuss attributes of widely used conductive fluids, their novel patterning/fabrication techniques, and their corresponding state-of-the-art applications.Most of the conventional antennas are fabricated by etching the copper cladding on the rigid substrates to form static conductor shapes. Such antennas are highly efficient but suffer from irreversible structure deformation and even damage when being bent or stretched beyond certain limits [3]. As alternatives, several types of copper-coated polymer substrates such as Kapton, polyethylene terephthalate (PET), and polyethylene naphthalate (PEN) films have been investigated to accommodate the need in flexible applications such as antennas. Similar to conventional substrates, the electrical properties of these substrates also degrade after severe bending/stretching, which in turn reduces antenna efficiency. Another option is polymer-based materials such as polydimethylsiloxane (PDMS), which has been typically used in combination with copper foils to realize highly flexible antennas. However, the semi-rigid copper foils may potentially suffer from irreversible deformation after certain bending cycles. Alternatively, liquid metals can be injected into microfluidic channels to fabricate highly flexible and mechanically stable antennas without compromising their electrical properties [4].In [5], a broader review of fluidics-based tuning methods for the development of microwave components was presented. Although, this included a review of antennas based on dielectric/conductive fluids, it primarily covered flexible and frequency-tunable antenna/arrays and lacked depth on polarization/pattern reconfigurability techniques. Additionally, discussion of recent advancements in state-of-the-art liquid metal applications was also missing in [5]. In [6], a mini review of flexible and stretchable antennas based on textile materials was discussed. Here, the focus was on the benefits of conductive filler-based elastomers used in antennas for bio-integrated electronics applications and the trade-off between antenna stretchability and its performance. However, a detailed review of materials, novel fabrication te...

A planar, low-profile, dual-band and dual-polarized antenna on a semi-flex substrate is proposed in this paper. The antenna is fabricated on Rogers substrate with a thickness of 3.04 mm and sized at 70.4 × 76.14 × 3.11 mm 3 (0.37λ 0 × 0.40λ 0 × 0.016λ 0 ) only. The circular polarization property is enabled in the global navigation satellite system (GNSS) L1/E1 (lower) band by introducing a complementary split ring resonator on the antenna patch. Meanwhile, the antenna operates in the second (upper) 2.45 GHz WLAN band is enabled by etching a U-shaped slot on its ground plane. This simultaneous, dual-band and dual-polarized operation enables the proposed antenna to be applied in the indoor/outdoor wearable application. To isolate the antenna against the influence of the human body, a multiband artificial magnetic conductor (AMC) plane is added on the reverse side of the dual-band radiator. Comparison of the antenna without AMC in free space and when evaluated on the chest of a human body backed by AMC showed improved gain; from 3-5.1 dBi in the lower band, and from 1.53-5.03 dBi in the upper band. Besides that, the front-to-back ratio of the AMC backed monopole antenna also improved from 11-21.88 dB and from 2.5-24.5 dB in the GNSS and WLAN bands, respectively. Next, the specific absorption rate (SAR) of the monopole antenna with and without the AMC plane is assessed. Evaluation results indicate that the maximum SAR value decreased by up to 89.45 % in comparison with the antenna without AMC in the lower band. This indicates the effectiveness of the AMC array in increasing gain and FBR, besides reducing EM absorption in the human body.INDEX TERMS Wearable antennas, dual-band antennas, dual-polarized antennas, circularly polarized antennas, artificial magnetic conductor (AMC) plane.

Around the world, countries are integrating photovoltaic generating systems to the grid to support climate change initiatives. However, solar power generation is highly uncertain due to variations in solar irradiance level during different hours of the day. Inaccurate modelling of this variability can lead to non-optimal dispatch of system resources. Therefore, accurate characterization of solar irradiance patterns is essential for effective management of renewable energy resources in an electrical power grid. In this paper, the Weibull distribution based probabilistic model is presented for characterization of solar irradiance patterns. Firstly, Weibull distribution is utilized to model inter-temporal variations associated with reference solar irradiance data through moving window averaging technique, and then the proposed model is used for irradiance pattern generation. To achieve continuity of discrete Weibull distribution parameters calculated at different steps of moving window, Generalized Regression Neural Network (GRNN) is employed. Goodness of Fit (GOF) techniques are used to calculate the error between mean and standard deviation of generated and reference patterns. The comparison of GOF results with the literature shows that the proposed model has improved performance. The presented model can be used for power system planning studies where the uncertainty of different resources such as generation, load, network, etc., needs to be considered for their better management.

A dual band stub‐loaded artificial magnetic conductor (AMC) structure to enhance the gain of a dual band monopole is presented. Designed for operation in the 2.4 and 5 GHz WLAN bands, the AMC unit cell is intended to be capable of independently tuning the upper (5 GHz) band by varying the stub length of the structure. To assess the effectiveness of the AMC plane, it is integrated underneath a coplanar waveguide (CPW)‐fed planar monopole antenna. Both structures are designed and fabricated on a FR4 substrate. The unit cell is first multiplied into a 5 x 5 array to form the AMC plane, which acts as a reflector to the monopole antenna. Measurements indicated values of 6.76 dBi (at 2.4 GHz) in band‐I, 6.5 dBi (at 3.53 GHz) in band‐II, and finally 7.26 dBi (at 4.85 GHz) in band‐III. It is also observed that the measured antenna gain is improved to 7.26 dBi from 4.2 dBi at 4.85 GHz with reduced SAR values. Moreover, its overall size of 70 × 70 × 10.76 mm3 (0.45λ0 × 0.45λ0 × 0.07λ0) validated the compactness in comparison with other similar structures, with reasonable realized gain.

A low-cost inkjet printing method for antenna fabrication on a polyethylene terephthalate (PET) substrate is presented in this paper. An office inkjet printer is used to have desired patterns of silver nanoparticle ink on the PET substrate without any postprocessing. Silver nanoparticle ink cures instantly as soon as it is ejected from the printer on a chemically treated PET substrate. The thickness of the silver nanoparticle layer was measured to be 300 nm with a sheet resistance of as low as 0.3 Ω/sq and a conductivity around 1.11 × 10 7 S/m with single layer deposition. A coplanar waveguide-(CPW-) fed Z-shape planar antenna on the PET substrate achieved the measured radiation efficiency of 62% and the IEEE gain of 1.44 dBi at 2.45 GHz. The printed antenna is also tested in bending conditions to ascertain its performance for the Internet of things (IoT) conformal applications for the future 5G network.

No abstract

Smart watch antenna design is challenging due to the limited available area and the contact with the human body. The strap of smart watch can be utilized effectively for integration of the antenna. In this study, an antenna integrated on a smart watch strap model using computer simulation technology (CST) was designed. The antenna was designed for industrial, scientific, and medical (ISM) frequency bands at 2.45 and 5.8 GHz. Roger 3003C was used as substrate due to its semi-flexible nature. The antenna size is 28.81 × 19.22 × 1.58 mm3 and it has a gain of 1.03 and 5.97 dB, and efficiency of 80% and 95%, at 2.45 and 5.8 GHz, on the smart watch strap, respectively. A unit cell was designed having a dimension of 19.19 × 19.19 × 1.58 mm3 to mitigate the effect of back radiation and to enhance the gain. The antenna backed by the unit cell exhibited a gain of 2.44 and 6.17 dB with efficiency of 50% and 72% at 2.45 and 5.8 GHz, respectively. The AMC-backed antenna was integrated into a smart watch strap and placed on a human tissue model to study its human proximity effects. The specific absorption rate (SAR) values were calculated to be 0.19 and 1.18 W/kg at the designed ISM frequencies, and are well below the permissible limit set by the FCC and ICINPR. Because the antenna uses flexible material for wearable applications, bending analysis was also undertaken. The indicated results prove that bending along the x- and y-axes has a negligible effect on the antenna’s performance and the antenna showed excellent performance in the human proximity test. The measured results of the fabricated antenna were comparable with the simulated results. Thus, the designed antenna is compact, has high gain, and can be used effectively for wireless IoT applications.