This work describes the quick and simple fabrication of toner-based 96-microzone plates by a direct-printing technology. The printer deposits a toner layer (ca. 5 μm thick) on the polyester surface which acts as a hydrophobic barrier to confine small volumes of sample on test zones (wells). A 96-microzone toner plate was explored to demonstrate its capability of performing enzyme-linked immunosorbent assay (ELISA). The detection of anti-immunoglobulin G (anti-IgG) and immunoglobulin M (IgM) antibodies has been successfully achieved in cell culture and serum samples, respectively. The use of a conventional microplate reader has allowed obtaining a limit of detection of 13 fmol of mouse IgG per zone on printed microplates. The IgM antibody has been detected in a serum sample collected from a patient infected with dengue virus. The detection of a primary infection has been provided by a microplate reader and also by a cell phone camera. Besides the bioanalytical feasibility, toner-based zones have shown good repeatability for inter-zone and intra-plate comparisons. The relative standard deviation (RSD) values for inter-zone (n = 12) and intra-plate (n = 3) comparisons were lower than 6% and 11%, respectively. Furthermore, it was found that the lifetime of each printed microplate depends on the storage temperature. The shelf life for devices stored at 10 °C has been estimated to be ca. four weeks.

This report describes a kinetic study for the glucose oxidase reaction on microfluidic toner-based analytical devices based on digital image analysis.

No abstract

No abstract

Dengue diagnosis was performed on printed microzones based on colorimetric detection of IgG and IgM biomarkers in serum samples through enzyme-linked-immunosorbent assay experiments.