Conjunctival hyperemia induced by ripasudil 0.4% peaks rapidly to moderate severity, but subsides relatively quickly.

Purpose: We evaluated the agreement between the intraocular pressure (IOP) values of new rebound tonometer, Icare ic100, and Icare TA01i or Goldmann applanation tonometer (GAT). Methods: We studied one eye each of 106 subjects (57 with primary open-angle glaucoma, 49 healthy subjects). IOP was randomly measured twice with the patient in sitting position using the Icare ic100, Icare TA01i, and GAT. Tonometer measurements were evaluated using Bland-Altman analysis. The relationship between IOP difference (Icare ic100-GAT) and age, sex, disease, axial length, central corneal thickness (CCT), and corneal curvature was investigated using multivariate regression analysis. Results: IOPs measured using Icare ic100, Icare TA01i, and GAT were 11.7±3.0 (mean±standard deviation), 12.2±2.9, and 16.0±3.2 mm Hg, respectively (P<0.001, one-way analysis of variance). Icare ic100 showed significantly lower IOPs than GAT (P<0.05), but not than Icare TA01 (P>0.05; Tukey-Kramer test). Bland-Altman analysis revealed that the mean differences between Icare ic100 and Icare TA01i and those between Icare ic100 and GAT were −0.46 and −4.2 mm Hg, respectively (95% limits of agreement, −3.35 to 2.42 and −10.10 to 1.61 mm Hg, respectively). For IOP differences between Icare ic100 and GAT, parameters selected in the optimal model were CCT (coefficient, 20.3, P=0.029), corneal curvature (3.0, P=0.020), and glaucoma-normal (−1.0, P=0.004). Conclusions: The new rebound tonometer Icare ic100 almost constantly showed IOPs lower than GAT. The difference was affected by CCT, corneal curvature, and disease.

PurposeModern cataract surgery is generally considered to bring about modest and sustained intraocular pressure (IOP) reduction. However, the pathophysiological mechanism for this remains unclear. Moreover, a change in ocular biomechanical properties after surgery can affect the measurement of IOP. The aim of the study is to investigate ocular biomechanics, before and following cataract surgery, using Corvis ST tonometry (CST).Patients and methodsFifty-nine eyes of 59 patients with cataract were analyzed. IOP with Goldmann applanation tonometry (IOP-G), axial length, corneal curvature and CST parameters were measured before cataract surgery and, up to 3 months, following surgery. Since CST parameters are closely related to IOP-G, linear modeling was carried out to investigate whether there was a change in CST measurements following cataract surgery, adjusted for a change in IOP-G.ResultsIOP-G significantly decreased after surgery (mean±standard deviation: 11.8±3.1 mmHg) compared to pre-surgery (15.2±4.3 mmHg, P<0.001). Peak distance (the distance between the two surrounding peaks of the cornea at the highest concavity), maximum deformation amplitude (the movement of the corneal apex from the start of deformation to the highest concavity) and A1/A2 velocity (the corneal velocity during inward or outward movement) significantly increased after cataract surgery (P<0.05) while radius (the central curvature radius at the highest concavity) was significantly smaller following cataract surgery (P<0.05). Linear modeling supported many of these findings, suggesting that peak distance, maximum deformation amplitude and A2 velocity were increased, whereas A2 deformation amplitude and highest concavity time were decreased (after adjustment for IOP change), following cataract surgery.ConclusionCorneal biomechanical properties, as measured with CST, were observed to change significantly following cataract surgery.Trial registrationJapan Clinical Trials Registry UMIN000014370

IT decreases with the progression of the NVG stage and is thinnest in 360-degree AC-NVG patients. Our study suggests a new morphologic feature of NVG.

Purpose: To investigate iris morphological features in 360° angle-closure neovascular glaucoma (NVG) by swept-source anterior segment optical coherence tomography (ASOCT). Patients and Methods: In this retrospective, clinic-based, comparative study, 14 patients with 360° angle-closure NVG and 14 healthy age-matched control subjects were enrolled. All patients enrolled had no prior glaucoma surgery but underwent cataract surgery with intraocular lens implantation. Horizontal scanning images of swept-source ASOCT were analyzed using software calipers in temporal and nasal angle areas. The iris thickness at 1 and 2 mm from the pupil edge, iris length, trabecular meshwork length, peripheral anterior synechia (PAS) length, PAS height ratio (PAS length/trabecular meshwork length), and pupil diameter were measured. Results: Between the groups, there were no statistically significant differences in iris length, trabecular meshwork length, and pupil diameter (p > 0.05). However, the iris thickness was significantly reduced in the NVG group compared with the control group in the temporal and nasal areas (0.306 vs. 0.563 mm/0.326 vs. 0.645 mm at 1 mm, 0.278 vs. 0.523 mm/0.282 vs. 0.546 mm at 2 mm, respectively) (mean, all p < 0.001). In the NVG group, PAS height ratios were 1.55 ± 0.45 (mean ± standard deviation) (range, 0.58–2.30) and 1.55 ± 0.78 (range, 0.68–3.68) at the temporal and nasal angles, respectively. Conclusions: In patients with 360° angle-closure NVG, the iris thickness decreased to about 50% of that in healthy subjects, and the PAS length exceeded the trabecular meshwork length by about 1.5 times.