No abstract

No abstract

The research activities in the development of recyclable and reprocessable covalently crosslinked networks, and the construction of polymers from renewable resources are both stemmed from the economical and environmental problems associated with traditional thermosets. However, there is little effort in combination of these two attractive strategies in material designs. This article reported a bio‐based vitrimer constructed from isosorbide‐derived epoxy and aromatic diamines containing disulfide bonds. The resulted dynamic epoxy resins showed comparable thermomechanical properties as compared to similar epoxy networks cured by traditional curing agent. Rheological tests demonstrated the fast stress relaxation of the dynamic network due to the rapid metathesis of disulfide bonds at temperature higher than glass transition temperature. This feature permitted the recycling and reprocessing of the fragmented samples for several times by hot press. The dynamic epoxy resins also exhibited shape‐memory effect, and it is demonstrated that the shape recovery ratio could be readily adjusted by controlling the stress relaxation in the temporary state at programming temperature. Moreover, the degradability of the dynamic epoxy resins in alkaline aqueous solution was also demonstrated. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 1790–1799

Conductive multiwall carbon nanotube/polystyrene (MWCNT/PS) composites are prepared based on latex technology. MWCNTs are first dispersed in aqueous solution of sodium dodecyl sulfate (SDS) driven by sonication and then mixed with different amounts of PS latex. From these mixtures MWCNT/PS composites were prepared by freeze-drying and compression molding. The dispersion of MWCNTs in aqueous SDS solution and in the PS matrix is monitored by UV-vis, transmission electron microscopy, electron tomography and scanning electron microscopy. When applying adequate preparation conditions, MWCNTs are well dispersed and homogeneously incorporated in the PS matrix. The percolation threshold for conduction is about 1.5 wt% of MWCNTs in the composites, and a maximum conductivity of about 1 S m À1 can be achieved. The approach presented can be adapted to other MWCNT/polymer latex systems.

Polydopamine particles were used as fillers for constructing multifunctional composites for the first time.

Aromatic furanic polyamides with relatively high molecular weight were synthesized, and good thermal stability and mechanical properties were demonstrated.

A facile polydopamine-templated approach to nitrogen-doped hierarchical porous carbon nanospheres for high-performance supercapacitors.

No abstract