Resumo: O objetivo deste trabalho é o estudo da viabilidade da utilização do Método de Simulação pelo Hipercubo Latino na estimativa da produtividade do processo de soldagem elétrica MAG em obras de montagem de tubulações industriais com base em pequenas amostras. O estudo foi realizado a partir da análise de dados históricos em obras realizadas na REDUC (Refinaria Duque de Caxias -Estado do Rio de Janeiro -Brasil), onde foi utilizado o software ControlTub 5.3 na coleta dos dados. A partir desta base de dados foram retiradas para análise pequenas amostras aleatórias, considerando cada uma delas como se o restante do conjunto amostral fosse desconhecido Nas pequenas amostras foram realizadas simulações com o Método do Hipercubo Latino. As simulações são realizadas no ambiente de programação do MAthWorks e do BestFit. Comparando-se os resultados da amostra com 52 elementos e os dados gerados por simulação com base nas pequenas amostras observa-se a viabilidade da aplicação do Método de Simulação Hipercubo Latino na estimativa da produtividade na soldagem de tubulações industriais com o processo MAG. É apresentada, também, uma ferramenta de avaliação da produtividade em tempo real, possibilitando ajustes nas estimativas e monitoração da produtividade durante a realização das atividades previstas, possibilitando a avaliação não somente na conclusão da obra, o que é uma prática atual da indústria. A utilização da simulação com o método de Hipercubo Latino apresenta desdobramentos que permitem a adoção de critérios, tais como, produtividade otimista, média e pessimista. Palavras chave: Produtividade, Simulação, Hipercubo Latino, Soldagem MAGAbstract: This paper deals with the analysis of the viability using the Latin Hypercube Sampling Simulation Method to measure the productivity in the industrial MAG welding piping based on small samples. The study was conducted by analyzing a sample collected in works made in Duque de Caxias Refinery (REDUC), in Rio de Janeiro, Brazil. The ControlTub 5.3 software was used for data acquisition and in the simulation it was used the Mathworks and the BestFit program environment. The data analyses of the obtained results were compared using the proposed simulation method, demonstrating its applicability. It also presents an assessment tool productivity in real time, allowing for adjustments in estimates of productivity and monitoring during the performance of the enterprise, enabling its evaluation not only in completing the work, which is the current industry practice. These results demonstrated the feasibility in applying the method of Latin Hypercube Sampling in estimating productivity considering the MAG welding process in industrial pipes assembly and the capacity to build some evaluation scenarios, like optimist, mean and pessimist productivity.
Resumo Os aços inoxidáveis Duplex (AID) aliam uma excelente resistência à corrosão com elevada resistência mecânica devido à fina microestrutura bifásica composta por quantidades similares de ferrita (d) e austenita (g).
ResumenSe evalúan los métodos de simulación de Monte Carlo e Hipercubo Latino para estimar la productividad del proceso de soldadura eléctrica por electrodo revestido (shielded metal arc welding) en las obras de montaje de tuberías industriales considerando pequeñas muestras. El estudio se realizó mediante el análisis de una muestra recogida en el ámbito de las obras en la Refinería Duque de Caxias, Estado de Río de Janeiro en Brasil. Se utilizó el programa ControlTub 5.3 para la adquisición de los datos y el programa de MathWorks para la simulación, Para el análisis de los datos se comparó los resultados obtenidos mediante los métodos estudiados. Posteriormente, se evaluaron las similitudes y diferencias entre estos métodos en la estimación de la productividad del proceso. Los resultados demostraron la viabilidad de aplicar los métodos de simulación de Monte Carlo e Hipercubo Latino en la estimación de la productividad en el proceso de soldadura de tuberías industriales. Palabras clave: productividad, soldadura, simulación de Monte Carlo, Hipercubo Latino Comparison in estimating productivity of Shielded Metal Arc Welding process through Monte Carlo and Latin Hypercube Sampling Simulation Methods AbstractThe ability of Monte Carlo simulation and Latin Hypercube Sampling methods in estimating the productivity of the Shielded Metal Arc Welding (SMAW) applied in works of industrial piping assembly based on small samples is evaluated. The study was conducted by analyzing a sample collected from assembly operations done at refinery Duque de Caxias, Rio de Janeiro in Brazil. The ControlTub 5.3 software was used for data acquisition and MathWorks in the simulation step. For data analysis the results were compared using the proposed simulation methods. Then the similarities and differences between the methods to estimate the process productivity in analysis were evaluated. The results demonstrated the feasibility of applying the methods of Monte Carlo Simulation and Latin Hypercube Sampling in estimating productivity considering a welding process of industrial pipes.
ResumoO objetivo deste artigo é o de analisar a viabilidade da utilização do método de Monte Carlo para estimar a produtividade na soldagem de tubulações industriais de aço carbono com base em amostras pequenas. O estudo foi realizado através de uma análise de uma amostra de referência contendo dados de produtividade de 160 juntas soldadas pelo processo Eletrodo Revestido na REDUC (refinaria de Duque de Caxias), utilizando o software ControlTub 5.3. A partir desses dados foram retiradas de forma aleatória, amostras com, respectivamente, 10, 15 e 20 elementos e executadas simulações pelo método de Monte Carlo. Comparando-se os resultados da amostra com 160 elementos e os dados gerados por simulação se observa que bons resultados podem ser obtidos usando o método de Monte Carlo para estimativa da produtividade da soldagem. Por outro lado, na indústria da construção brasileira o valor da média de produtividade é normalmente usado como um indicador de produtividade e é baseado em dados históricos de outros projetos coletados e avaliados somente após a conclusão do projeto, o que é uma limitação. Este artigo apresenta uma ferramenta para avaliação da execução em tempo real, permitindo ajustes nas estimativas e monitoramento de produtividade durante o empreendimento. Da mesma forma, em licitações, orçamentos e estimativas de prazo, a utilização desta técnica permite a adoção de outras estimativas diferentes da produtividade média, que é comumente usada e como alternativa, se sugerem três critérios: produtividade otimista, média e pessimista. Palavras-Chave: Produtividade, Simulação, Método de Monte Carlo, Soldagem Abstract: The aim of this article is to analyze the feasibility of using Monte Carlo method to estimate productivity in industrial pipes
Duplex stainless steels (DSSs) combine excellent corrosion resistance and high mechanical strength, due to the fine twophase microstructure composed of similar amounts of ferrite (d) and austenite (g). These alloys are used in piping and industrial equipment for which a high strength-to-weight ratio is required, especially in building construction and off-shore assembly. However, welding operating conditions can promote a significant microstructural imbalance of these phases, resulting in a decrease of the properties cited above. Evaluation by feritscope is normally used in these activities. During evaluation with a feritscope, the welded joint may be rejected when the weld metal is found to have ferrite values outside of the range established by project specifications. Thus, analysis of these joints is important, along with complementary techniques such as the use of metallographic replicas. This study aimed to evaluate the proportion of phases in relatively thin spools of DSS, welded in the field, comparing the non-destructive techniques described. The results show similar values, yet the result may be influenced by the shape and surface conditions of the welded joint.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.