Bluetooth Low Energy (BLE) is an emerging low-power wireless technology developed for short-range control and monitoring applications that is expected to be incorporated into billions of devices in the next few years. This paper describes the main features of BLE, explores its potential applications, and investigates the impact of various critical parameters on its performance. BLE represents a trade-off between energy consumption, latency, piconet size, and throughput that mainly depends on parameters such as connInterval and connSlaveLatency. According to theoretical results, the lifetime of a BLE device powered by a coin cell battery ranges between 2.0 days and 14.1 years. The number of simultaneous slaves per master ranges between 2 and 5,917. The minimum latency for a master to obtain a sensor reading is 676 μs, although simulation results show that, under high bit error rate, average latency increases by up to three orders of magnitude. The paper provides experimental results that complement the theoretical and simulation findings, and indicates implementation constraints that may reduce BLE performance.

Abstract-Duty-cycled Medium Access Control (MAC) protocols certainly improve the energy efficiency of wireless networks. However, most of these protocols still suffer from severe degrees of overhearing and idle listening. These two issues prevent optimum energy usage, a crucial aspect in energy-constrained wireless networks such as Wireless Sensor Networks (WSN). Wake-up Radio (WuR) systems drastically reduce these problems by completely switching off the nodes' MicroController Unit (MCU) and main radio transceiver until a secondary, extremely low-power receiver is triggered by a particular wireless transmission, the so called Wake-up Call. Unfortunately, most WuR studies focus on theoretical platforms and/or custom-built simulators. Both these factors reduce the associated usefulness of the obtained results. In this paper, we model and simulate a real, recent and promising WuR hardware platform developed by the authors. The simulation model uses time and energy consumption values obtained in the laboratory and does not rely on custombuild simulation engines but rather on OMNET++ simulator. The performance of the WuR platform is compared with four of the most well-known and widely employed MAC protocols for WSN under three real-world network deployments. The paper demonstrates how the use of our WuR platform presents numerous benefits in several areas, from energy-efficiency and latency to packet delivery ratio and applicability, and provides the essential information for serious consideration of switching duty-cycled MAC-based networks to WuR.

The next wave driving the expansion of the Internet will come from the Internet of Things. Bluetooth LE is a rapidly emerging ultra-low-power radio technology expected to be incorporated in billions of IoT devices in the next few years. Consequently, it is particularly important to specify Internet connectivity solutions for Bluetooth LE. In this article we present such solutions based on the ongoing standardization work in the IETF and Bluetooth Special Interest Group. We prove the feasibility of a complete IP-based protocol stack on constrained devices and illustrate its performance, highlighting key trade-offs. In addition, we discuss gateway operation covering global IPv6 connectivity and proxy-cache functionality.Postprint (published version

5G Internet of Things (5G IoT), which is currently under the development by 3GPP, paves the way for connecting diverse categories of devices to the IoT via cellular networks. For battery-powered low-cost IoT devices, wake-up radio (WuR) appears as an eminent technique for prolonging the lifetime of such devices, thanks to its outstanding energy consumption performance. However, only a part of small-size battery-powered IoT devices are able to transmit to a cellular IoT base station (BS) directly. In the article, we present W2B-IoT, a prototype implementation of a WuR-based two-tier system, which bridges cellular IoT BS and WuR via a Bluetooth low energy (BLE)enabled Android smartphone. Such a WuR-enabled IoT device features a current consumption of merely 390 nA and a response time of 95 ms for decoding a wake-up call.

Today, the vast majority of personal communication devices, such as laptops, smartphones, and logically wireless fidelity (Wi-Fi) access points feature IEEE 802.11 chipsets. In turn, wake-up radio (WuR) systems are used to reduce the significant energy waste that wireless devices cause during their idle communication mode. A novel WuR system is introduced that enables any IEEE 802.11-enabled device to be used as a WuR transmitter without requiring any hardware modification. The corresponding developed WuR receiver achieves a remarkably low power consumption of 10.8 µW and operates in the Wi-Fi 2.4 GHz band. By means of thorough physical tests, it is shown that the proposed IEEE 802.11-based WuR system enables important energy savings.Postprint (author’s final draft

Energy-efficient communication is one of the main concerns of wireless sensor networks nowadays. A commonly employed approach for achieving energy efficiency has been the use of duty-cycled operation of the radio, where the node's transceiver is turned off and on regularly, listening to the radio channel for possible incoming communication during its on-state. Nonetheless, such a paradigm performs poorly for scenarios of low or bursty traffic because of unnecessary activations of the radio transceiver. As an alternative technology, Wake-up Radio (WuR) systems present a promising energy-efficient network operation, where target devices are only activated in an on-demand fashion by means of a special radio signal and a WuR receiver. In this paper, we analyze a novel wake-up radio approach that integrates both data communication and wake-up functionalities into one platform, providing a reconfigurable radio operation. Through physical experiments, we characterize the delay, current consumption and overall operational range performance of this approach under different transmit power levels. We also present an actual single-hop WuR application scenario, as well as demonstrate the first true multi-hop capabilities of a WuR platform and simulate its performance in a multi-hop scenario. Finally, by thorough qualitative comparisons to the most relevant WuR proposals in the literature, we state that the proposed WuR system stands out as a strong candidate for any application requiring energy-efficient wireless sensor node communications.

Energy-efficient operation is a challenge for wireless sensor networks (WSNs). A common method employed for this purpose is duty-cycled operation, which extends battery lifetime yet incurs several types of energy wastes and challenges. A promising alternative to duty-cycled operation is the use of wake-up radio (WuR), where the main microcontroller unit (MCU) and transceiver, that is, the two most energy-consuming elements, are kept in energy-saving mode until a special signal from another node is received by an attached, secondary, ultra-low power receiver. Next, this so-called wake-up receiver generates an interrupt to activate the receiver node's MCU and, consequently, the main radio. This article presents a complete wake-up radio design that targets simplicity in design for the monetary cost and flexibility concerns, along with a good operation range and very low power consumption. Both the transmitter (WuTx) and the receiver (WuRx) designs are presented with the accompanying physical experiments for several design alternatives. Detailed analysis of the end system is provided in terms of both operational distance (more than 10 m) and current consumption (less than 1 μA). As a reference, a commercial WuR system is analyzed and compared to the presented system by expressing the trade-offs and advantages of both systems.

The use of duty-cycling in Medium Access Control (MAC) protocols effectively helps improving the energy efficiency of wireless networks. However, while the benefits of these protocols are unquestionable, most of them still suffer from overhearing and idle listening, two issues that prevent duty-cycled systems from achieving optimum energy usage, which is a crucial aspect in specific types of wireless networks such as Wireless Sensor Networks (WSN).Wake-up Radio (WuR) systems have been employed recently to overcome these issues. Under this approach, the nodes' MicroController Unit (MCU) and main radio transceiver are completely switched off and only activated when a secondary, extremely low-power receiver in the node is triggered by a particular wireless transmission. Wake-up Radio systems allow for drastic energy savings since receiver nodes are only activated on-demand, maximizing their battery lifetimes. In this paper, we have modeled and simulated a real, recent and promising WuR hardware platform based on its time and energy consumption characterization. By comparing such WuR approach to B-MAC and IEEE 802.15.4, two well-known and widely employed MAC protocols, we show it effectively out-performs the conventional WSN MAC approaches in terms of energy efficiency. To the best of authors' knowledge, this is the first study to include a comparative analysis for multi-hop networks based on a real WuR platform, which shows WuR systems represent an energy-efficient solution that also provides a good tradeoff between latency, packet delivery ratio and applicability..Peer ReviewedPostprint (published version