Surface-enhanced infrared absorption spectroscopy has attracted increased attention for direct access to molecular vibrational fingerprints in the mid-infrared. Perfect-absorber metamaterials (PAMs) with multi-band spectral responses and significant enhancement of the local near-field intensity were developed to improve the intrinsic absorption cross sections of absorption spectrum to identify the vibrational spectra of biomolecules. To verify its performance, the proposed infrared PAM array was used to identify the molecular stretches of a Parylene C film. The resonant responses of the infrared PAMs were accurately tuned to the vibrational modes of the C = C target bonds. The vibrational stretches of the C = C moiety were observed and the auto-fluorescence mechanisms of the Parylene C film were monitored. The unique properties of the PAMs indicate that this approach is a promising strategy for surface-enhanced molecular absorption spectroscopy (SEMS) in the mid-infrared region and for the tracking of characteristic molecular vibrational modes.

Abstract:A novel resonant pressure sensor with an improved micromechanical double-ended tuning fork resonator packaged in dry air at atmospheric pressure is presented. The resonator is electrostatically driven and capacitively detected, and the sensor is designed to realize a low cost resonant pressure sensor with medium accuracy. Various damping mechanisms in a resonator that is vibrating at atmospheric pressure are analyzed in detail, and a formula is developed to predict the overall quality factor. A trade-off has been reached between the quality factor, stress sensitivity and drive capability of the resonator. Furthermore, differential sense elements and the method of electromechanical amplitude modulation are used for capacitive detection to obtain a large signal-to-noise ratio. The prototype sensor chip is successfully fabricated using a micromachining process based on a commercially available silicon-on-insulator wafer and is hermetically encapsulated in a custom 16-pin Kovar package. Preliminary measurements show that the fundamental frequency of the resonant pressure sensor is approximately 34.55 kHz with a pressure sensitivity of 20.77 Hz/kPa. Over the full scale pressure range of 100-400 kPa and the whole temperature range of −20-60 °C, high quality factors from 1,146 to 1,772 are obtained. The characterization of the prototype sensor reveals the feasibility of a resonant pressure sensor packaged at atmospheric pressure.

No abstract

Cell studies at the single-cell level are becoming more and more critical for understanding the complex biological processes. Here, we present an optimization study investigating the positioning of single cells using micromolding in capillaries technology coupled with the cytophobic biomaterial poly (2-hydroxyethyl methacrylate) (poly (HEMA)). As a cytophobic biomaterial, poly (HEMA) was used to inhibit cells, whereas the glass was used as the substrate to provide a cell adhesive background. The poly (HEMA) chemical barrier was obtained using micromolding in capillaries, and the microchannel networks used for capillarity were easily achieved by reversibly bonding the polydimethylsiloxane mold and the glass. Finally, discrete cell adhesion regions were presented on the glass surface. This method is facile and low cost, and the reagents are commercially available. We validated the cytophobic abilities of the poly (HEMA), optimized the channel parameters for higher quality and more stable poly (HEMA) patterns by investigating the effects of changing the aspect ratio and the width of the microchannel on the poly (HEMA) grid pattern, and improved the single-cell occupancy by optimizing the dimensions of the cell adhesion regions. V C 2015 AIP Publishing LLC.

No abstract

No abstract

No abstract

No abstract