Graphene oxide membranes-partially oxidized, stacked sheets of graphene-can provide ultrathin, high-flux and energy-efficient membranes for precise ionic and molecular sieving in aqueous solution. These materials have shown potential in a variety of applications, including water desalination and purification, gas and ion separation, biosensors, proton conductors, lithium-based batteries and super-capacitors. Unlike the pores of carbon nanotube membranes, which have fixed sizes, the pores of graphene oxide membranes-that is, the interlayer spacing between graphene oxide sheets (a sheet is a single flake inside the membrane)-are of variable size. Furthermore, it is difficult to reduce the interlayer spacing sufficiently to exclude small ions and to maintain this spacing against the tendency of graphene oxide membranes to swell when immersed in aqueous solution. These challenges hinder the potential ion filtration applications of graphene oxide membranes. Here we demonstrate cationic control of the interlayer spacing of graphene oxide membranes with ångström precision using K, Na, Ca, Li or Mg ions. Moreover, membrane spacings controlled by one type of cation can efficiently and selectively exclude other cations that have larger hydrated volumes. First-principles calculations and ultraviolet absorption spectroscopy reveal that the location of the most stable cation adsorption is where oxide groups and aromatic rings coexist. Previous density functional theory computations show that other cations (Fe, Co, Cu, Cd, Cr and Pb) should have a much stronger cation-π interaction with the graphene sheet than Na has, suggesting that other ions could be used to produce a wider range of interlayer spacings.
A polyionized hydrogel polymer (sodium polyacrylate-grafted poly(vinylidene fluoride) (PAAS-g-PVDF)) is fabricated via an alkaline-induced phase-inversion process. PAAS-g-PVDF coatings exhibit unprecedented anti-adhesion and self-cleaning properties to crude oils under an aqueous environment. A PAAS-g-PVDF-coated copper mesh can effectively separate a crude oil/water mixture with extremely high flux and high oil rejection driven by gravity, and is oil-fouling-free for long-term use.
Three-dimensional (3D) graphene aerogels (GA) show promise for applications in supercapacitors, electrode materials, gas sensors, and oil absorption due to their high porosity, mechanical strength, and electrical conductivity. However, the control, actuation, and response properties of graphene aerogels have not been well studied. In this paper, we synthesized 3D graphene aerogels decorated with Fe3O4 nanoparticles (Fe3O4/GA) by self-assembly of graphene with simultaneous decoration by Fe3O4 nanoparticles using a modified hydrothermal reduction process. The aerogels exhibit up to 52% reversible magnetic field-induced strain and strain-dependent electrical resistance that can be used to monitor the degree of compression/stretching of the material. The density of Fe3O4/GA is only about 5.8 mg cm(-3), making it an ultralight magnetic elastomer with potential applications in self-sensing soft actuators, microsensors, microswitches, and environmental remediation.
Graphene oxide (GO) is an excellent bacteria-killing nanomaterial. In this work, macroscopic applications of this promising nanomaterial by fixing GO sheets onto cotton fabrics, which possess strong antibacterial property and great laundering durability, are reported. The GO-based antibacterial cotton fabrics are prepared in three ways: direct adsorption, radiation-induced crosslinking, and chemical crosslinking. Antibacterial tests show that all these GO-containing fabrics possess strong antibacterial property and could inactivate 98% of bacteria. Most significantly, these fabrics can still kill >90% bacteria even after being washed for 100 times. Also importantly, animal tests show that GO-modified cotton fabrics cause no irritation to rabbit skin. Hence, it is believed that these flexible, foldable, and re-usable GO-based antibacterial cotton fabrics have high promise as a type of new nano-engineered antibacterial materials for a wide range of applications.
The development of high specific surface area amidoxime-based polymeric (H-ABP) fibers presents a new technology for the synthesis of highly efficient adsorbents for uranium extraction from seawater (UES), thus opening a whole new means of nuclear fuel production from the ocean.
Conventional polymer membranes suffer from low flux and serious fouling when used for treating emulsified oil/water mixtures. Reported herein is the fabrication of a novel superhydrophilic and underwater superoleophobic poly(acrylic acid)‐grafted PVDF filtration membrane using a salt‐induced phase‐inversion approach. A hierarchical micro/nanoscale structure is constructed on the membrane surface and endows it with a superhydrophilic/underwater superoleophobic property. The membrane separates both surfactant‐free and surfactant‐stabilized oil‐in‐water emulsions under either a small applied pressure (<0.3 bar) or gravity, with high separation efficiency and high flux, which is one to two orders of magnitude higher than those of commercial filtration membranes having a similar permeation property. The membrane exhibits an excellent antifouling property and is easily recycled for long‐term use. The outstanding performance of the membrane and the efficient, energy and cost‐effective preparation process highlight its potential for practical applications.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.