Three-dimensional nanofibrous aerogels (NFAs) that are both highly compressible and resilient would have broad technological implications for areas ranging from electrical devices and bioengineering to damping materials; however, creating such NFAs has proven extremely challenging. Here we report a novel strategy to create fibrous, isotropically bonded elastic reconstructed (FIBER) NFAs with a hierarchical cellular structure and superelasticity by combining electrospun nanofibres and the fibrous freeze-shaping technique. Our approach causes the intrinsically lamellar deposited electrospun nanofibres to assemble into elastic bulk aerogels with tunable densities and desirable shapes on a large scale. The resulting FIBER NFAs exhibit densities of 40.12 mg cm À 3 , rapid recovery from deformation, efficient energy absorption and multifunctionality in terms of the combination of thermal insulation, sound absorption, emulsion separation and elasticity-responsive electric conduction. The successful synthesis of such fascinating materials may provide new insights into the design and development of multifunctional NFAs for various applications.
Developing a feasible and efficient separation membrane for the purification of highly emulsified oily wastewater is of significance but challenging due to the critical limitations of low flux and serious membrane fouling. Herein, a biomimetic and superwettable nanofibrous skin on an electrospun fibrous membrane via a facile strategy of synchronous electrospraying and electrospinning is created. The obtained nanofibrous skin possesses a lotus‐leaf‐like micro/nanostructured surface with intriguing superhydrophilicity and underwater superoleophobicity, which are due to the synergistic effect of the hierarchical roughness and hydrophilic polymeric matrix. The ultrathin, high porosity, sub‐micrometer porous skin layer results in the composite nanofibrous membranes exhibiting superior performances for separating both highly emulsified surfactant‐free and surfactant‐stabilized oil‐in‐water emulsions. An ultrahigh permeation flux of up to 5152 L m−2 h−1 with a separation efficiency of >99.93% is obtained solely under the driving of gravity (≈1 kPa), which was one order of magnitude higher than that of conventional filtration membranes with similar separation properties, showing significant applicability for energy‐saving filtration. Moreover, with the advantage of an excellent antioil fouling property, the membrane exhibits robust reusability for long‐term separation, which is promising for large‐scale oily wastewater remediation.
Creating an efficient, cost-effective method that can provide simple, practical and high-throughput separation of oil-water mixtures has proved extremely challenging. This work responds to these challenges by designing, fabricating and evaluating a novel fluorinated polybenzoxazine (F-PBZ) modified nanofibrous membrane optimized to achieve gravity driven oil-water separation. The membrane design is then realized by a facile combination of electrospun poly(m-phenylene isophthalamide) (PMIA) nanofibers and an in situ polymerized F-PBZ functional layer incorporating SiO2 nanoparticles (SiO2 NPs). By employing the F-PBZ/SiO2 NP modification, the pristine hydrophilic PMIA nanofibrous membranes are endowed with promising superhydrophobicity with a water contact angle of 161° and superoleophilicity with an oil contact angle of 0°. This new membrane shows high thermal stability (350 °C) and good repellency to hot water (80 °C), and achieves an excellent mechanical strength of 40.8 MPa. Furthermore, the as-prepared membranes exhibited fast and efficient separation of oil-water mixtures by a solely gravity driven process, which makes them good candidates for industrial oil-polluted water treatments and oil spill cleanup, and also provided new insights into the design and development of functional nanofibrous membranes through F-PBZ modification.
A superwettable nanofibrous membrane with hierarchical structured skin for effective oil/water emulsion separation was fabricated via a combination of electrospinning and electrospraying.
Serious water pollution and the exhausting of fossil resources have become worldwide urgent issues yet to be solved. Solar energy driving photocatalysis processes based on semiconductor catalysts is considered to be the most promising technique for the remediation of wastewater. However, the relatively low photocatalytic efficiency remains a critical limitation for the practical use of the photocatalysts. To solve this problem, numerous strategies have been developed for the preparation of advanced photocatalysts. Particularly, incorporating a semiconductor with various functional components from atoms to individual semiconductors or metals to form a composite catalyst have become a facile approach for the design of high-efficiency catalysts. Herein, the recent progress in the development of novel photocatalysts for wastewater treatment via various methods in the sight of composite techniques are systematically discussed. Moreover, a brief summary of the current challenges and an outlook for the development of composite photocatalysts in the area of wastewater treatment are provided.
There is an increasing demand worldwide on advanced two-dimensional (2D) nanofibrous networks with applications ranging from environmental protection and electrical devices to bioengineering. Design of such nanoarchitectured materials has been considered a long-standing challenge. Herein, we report a direct electronetting technology for the fabrication of self-assembled 2D nanoarchitectured networks (nano-nets) from various materials. Tailoring of the precursor solution and of the microelectric field allows charged droplets, which are ejected from a Taylor cone, to levitate, deform and phase separate before they self-assemble a 2D nanofibre network architecture. The fabricated nano-nets show mechanical robustness and benefit from nanostructural properties such as enhanced surface wettability, high transparency, separation and improved air filtration properties. Calcination of the nano-nets results in the formation of carbon nano-nets with electric conductivity and titanium dioxide nano-nets with bioprotective properties.
Severe environmental and ecological issues arising from frequent oil spill accidents have been great worldwide concerns. Considering the abruptness, complex condition, and long-term perniciousness of the spilled oil, the development of economic and versatile materials to quickly remove oil contaminants, especially for oil with high viscosity from a large water body, is of significant importance but remains a big challenge. Herein, we demonstrated a facile strategy to fabricate a versatile hierarchical structured sponge with superhydrophobicity and powerful oil capillarity via the in situ polymerization of a novel phenolic resin (polybenzoxazine) composite open-cell sponges. The tunable hierarchical structures of the as-prepared sponge significantly improved its water repellence and oil capillarity; meanwhile, a plausible mechanism is also proposed. With the merits of high porosity, excellent water repellence, enhanced oil capillarity, and robust mechanical stability, the obtained sponge exhibited an intriguing oil spill cleanup performance with fast oil absorption speed, good recyclability, and high absorption capacity. Besides that, the modified sponge could also be utilized for the separation of oil/water mixture with individual phase and the surfactant-stabilized emulsion solely under the drive of gravity. The robust oil/water separation performance, low cost, and facile synthesis strategy make the resultant sponges a competitive material for the large-scale oil spill emergency remediation.
Creating a porous membrane to effectively separate the emulsified oil-in-water emulsions with energy-saving property is highly desired but remains a challenge. Herein, a multilayer nanofibrous membrane was developed with the inspiration of the natural architectures of earth for gravity-driven water purification. As a result, the obtained biomimetic multilayer nanofibrous membranes exhibited three individual layers with designed functions; they were the inorganic nanofibrous layer to block the serious intrusion of oil to prevent the destructive fouling of the polymeric matrix; the submicron porous layer with designed honeycomb-like cavities to catch the smaller oil droplets and ensures a satisfactory water permeability; and the high porous fibrous substrate with larger pore size provided a template support and allows water to pass through quickly. Consequently, with the cooperation of these three functional layers, the resultant composite membrane possessed superior anti-oil-fouling property and robust oil-in-water emulsion separation performance with good separation efficiency and competitive permeation flux solely under the drive of gravity. The permeation flux of the membrane for the emulsion was up to 5163 L m h with a separation efficiency of 99.5%. We anticipate that our strategy could provide a facile route for developing a new generation of specific membranes for oily wastewater remediation.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
334 Leonard St
Brooklyn, NY 11211
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.