In this article, we present a high-resolution shallow seismic surveying method for imaging the inner structure of the Miocene evaporitic formation, where sulfur ore occurs. The survey was completed in the northern part of the Carpathian Foredeep (SE Poland) where sulfur deposits occur up to a depth of ca. 260 m. In this region, the sulfur ore is strata-bound and exists within a carbonate interval of a thickness of approximately 28 m. The average sulfur content reaches up to 30%. Five seismic profiles were acquired with a total length of 2450 m. The acquisition was designed to obtain high-resolution, long offsets and a satisfactory signal-to-noise ratio. In the field, we used 48 channels and variable end-on roll-along spread that allowed us to record offsets of up to 375 m. Data processing was aimed at preserving relative amplitudes (known as RAP, relative amplitude preservation processing), an approach that is necessary for seismic inversion application. With the utilization of well log data and results of simultaneous inversion, we were able to calculate the elastic properties of the deposit to evaluate sulfur ore content and changes in lithology. The sulfur content is strongly dependent on the carbonate reservoir’s porosity. To evaluate porosity changes and associated sulfur content, a simultaneous inversion procedure was used. This is a pioneering approach in which we applied pre-stack inversion methods to shallow carbonate sediments.
The acquisition parameters and methodology of seismic data processing for high-resolution seismic imaging viewed through relative amplitude preservation are presented. An example of the obtaining of high-quality, shallow seismic data with a variable end-on spread is shown. The source used for the project is an accelerated weight drop. The study area lies within the mine waste disposal area, near Rudna village (Fore-Sudetic Monocline, WS Poland), and results are given for a 2D experimental profile. The aim of the project was to design optimal acquisition and processing parameters for the detailed recognition of Tertiary deposits. The proposed acquisition parameters are a compromise between time, cost and results. High-resolution seismic imaging enables the determining of layers within the range of thicknesses between 5 and 15 m, while the maximal depth of imaging reaches 400 m.
The authors present results of the first high-resolution deep seismic reflection survey in the Pieniny Klippen Belt (PKB) in Poland. This survey sheds new light on the matter of olistostromes and the mélange character of the PKB. The sedimentary mass-transport deposits represented by olistoliths and olistostromes manifest themselves by different petrophysical parameters of rocks (velocity, density and resistivity) and seismic attributes. Seismic attributes are very effective in the interpretation of the geology of complex mélanges. The authors used selected attributes: low-pass filter, energy, energy gradient, dip-steered median filter, Prewitt filter, Laplacian edge enhancing filter and square root of the energy gradient. These attributes emphasize changes of the seismic image inside mélange zones. The distinguished olistoliths are now inside imbricated thrust structures and they are tectonically rearranged. Polygenetic mélanges in the PKB originated as a result of sedimentary and tectonic processes. The PKB in the investigated area forms several north-vergent thrust sheets belonging to the Złatne and Hulina nappes. Both nappes contain large chaotic, non-reflective olistoliths as well as the smaller mainly high-reflective olistoliths. Olistoliths are arranged parallel to the flysch layering and thrusts. The results presented confirm the postulated two olistostrome belts within the PKB structure.
Thematic collection:
This article is part of the Polygenetic mélanges collection available at:
https://www.lyellcollection.org/cc/polygenetic-melanges
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.