Nanocomposites containing graphene oxide (GO), polyethyleneimine (PEI), and chitosan (CS) were synthesized for chromium(VI) and copper(II) removal from water. Response surface methodology (RSM) was used for the optimization of the synthesis of the CS-PEI-GO beads to achieve simultaneous maximum Cr(VI) and Cu(II) removals. The RSM experimental design involved investigating different concentrations of PEI (1.0-2.0%), GO (500-1500 ppm), and glutaraldehyde (GLA) (0.5-2.5%), simultaneously. Batch adsorption experiments were performed to obtain responses in terms of percent The optimum bead composition contained 2.0% PEI, 1500 ppm GO, and 2.08% GLA, and allowed Cr (VI) and Cu(II) removals of up to 91.10% and 78.18%, respectively. Finally, characterization of the structure and surface properties of the optimized CS-PEI-GO beads was carried out using X-ray diffraction (XRD), porosity and BET surface area analysis, scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS), which showed favorable adsorbent characteristics as given by a mesoporous structure with high surface area (358 m 2 g À1 ) and plenty of surface functional groups. Overall, the synthesized CS-PEI-GO beads were proven to be effective in removing both cationic and anionic heavy metal pollutants.
Selenium in water is becoming of increasing risk to human exposure because only recently serious health effects have been associated with their presence in water resources. The present study investigated the development and optimization of the composition of graphene oxide polymeric nanocomposite hydrogel beads by using response surface methodology. The use of polymers such as chitosan and polyethylenimine, which are rich in amine and alcoholic functional groups, provided enhanced removal of anionic selenium species from the water. Experimentally validated polymeric beads were used to perform batch adsorptions of selenium under different conditions such as pH, bead dosage, and diverse selenium concentrations to investigate their potential use, adsorption kinetics, and selenium removal mechanisms. Acidic conditions were found to best remove negatively charged selenium ions from aqueous solutions via −OH, −COOH, and amine functional groups present in the beads. The adsorption kinetic mechanism was better described by the pseudo-second-order adsorption kinetics, indicating that the beads remove selenium via chemisorption mechanisms. The isotherm studies showed an adsorption capacity of 1.62 mg/g based on the Langmuir isotherms at 25 °C. Regeneration studies showed loss of available adsorption sites after the first desorption treatment with different concentrations of NaOH and HCl. The mathematically optimized nanocomposite was further used to treat selenium spiked in real environmental water samples, which confirmed that the best removal of selenium occurs in acidic conditions.
Analysis
of the probability distribution of induction times for
acetaminophen and glycine supersaturated solutions showed that reduction
in sample volume results in an exponential increase in induction times.
It approximately increased by a factor of 55 when the volume was reduced
from 1000 to 25 μL. To elucidate the use of confinement as an
approach to nanocrystal development and polymorph access, we demonstrated
the effect of volume reduction on the nucleation of two model compounds,
acetaminophen and glycine. Using supersaturated solutions of both
compounds at volumes ranging from 1000 to 25 μL, induction time
statistics were obtained experimentally. Image analysis revealed that
form I acetaminophen and β-glycine formed as the initial primary
nucleation event, with β-glycine sometimes followed by a polymorph
transformation to γ-glycine shortly after. Image analysis showed
no variation in polymorphism occurring for acetaminophen systems across
all volumes. However, it was revealed that at volume sizes below 100
μL, primary nucleation in glycine systems shifts toward γ-glycine
nucleation. These results demonstrate the effects of volume reduction
on nucleation induction times, its implications on polymorphism, and
the extent of lessening the probability of a nucleation event.
We are currently witnessing the dawn of hydrogen (H 2 ) economy, where H 2 will soon become a primary fuel for heating, transportation, and longdistance and long-term energy storage. Among diverse possibilities, H 2 can be stored as a pressurized gas, a cryogenic liquid, or a solid fuel via adsorption onto porous materials. Metal−organic frameworks (MOFs) have emerged as adsorbent materials with the highest theoretical H 2 storage densities on both a volumetric and gravimetric basis. However, a critical bottleneck for the use of H 2 as a transportation fuel has been the lack of densification methods capable of shaping MOFs into practical formulations while maintaining their adsorptive performance. Here, we report a high-throughput screening and deep analysis of a database of MOFs to find optimal materials, followed by the synthesis, characterization, and performance evaluation of an optimal monolithic MOF ( mono MOF) for H 2 storage. After densification, this mono MOF stores 46 g L −1 H 2 at 50 bar and 77 K and delivers 41 and 42 g L −1 H 2 at operating pressures of 25 and 50 bar, respectively, when deployed in a combined temperature− pressure (25−50 bar/77 K → 5 bar/160 K) swing gas delivery system. This performance represents up to an 80% reduction in the operating pressure requirements for delivering H 2 gas when compared with benchmark materials and an 83% reduction compared to compressed H 2 gas. Our findings represent a substantial step forward in the application of high-density materials for volumetric H 2 storage applications.
Small Angle X-ray Scattering has been used to characterize nanoparticles generated by electrical arcing between metallic (AgSnO2) electrodes. The particles are found to have diameters between 30 and 40 nm and display smooth surfaces suggesting that they are either in liquid form or have solidified from the liquid state. Particles collected around the electrodes were analyzed by Transmission Electron Microscopy and were seen to be much larger than those seen in the SAXS measurement, to be spherical in form and composed of silver metal with irregular tin oxide particles deposited on their surface. Mixed metal nanoparticles can have important practical applications and the use of mixed sintered electrodes may be a direct method for their production
International audienceThe influence of a reactive atmosphere on the formation of nanoparticles (NPs) in the plasma plume generated by nanosecond pulsed laser irradiation of metal targets (Ti, Al, Ag) was probed in-situ using Small Angle X-ray Scattering (SAXS). Air and different O2-N2 gas mixtures were used as reactive gas within atmospheric pressure. SAXS results showed the formation of NPs in the plasma-plume with a mean radius varying in the 2-5 nm range. A decrease of the NPs size with increasing the O2 percentage in the O2-N2 gas mixture was also showed. Ex-situ observations by transmission electron microscopy and structural characterizations by x-ray diffraction and Raman spectroscopy were also performed for powders collected in experiments done using air as ambient gas. The stability of the different metal oxides is discussed as being a key parameter influencing the formation of NPs in the plasma-plume (E-MRS 2015 Spring Meeting Symposium CC: “Laser and plasma processing for advanced applications in material science”, 11-15 May 2015, Lille (France
Photocatalyst dissolution greatly diminishes the usability of photocatalysts in water treatments. Coating conductive polymers on the surface of photocatalysts can reduce dissolution without compromising the photocatalytic properties of the material. In this investigation, polypyrrole (PPy) and polyaniline (PANI) were used to coat two magnetic MoO 3 nanoparticles with different surface chemistries. The polymer-coated MoO 3 @Fe 3 O 4 nanoparticles were synthesized by optimizing the mole fractions of PPy or PANI, MoO 3 , and Fe 3 O 4 . The optimized PPy@ MoO 3 @Fe 3 O 4 (PMF1) and PANI@MoO 3 @Fe 3 O 4 (PMF2) resulted in 95.39 and 75.98% methylene blue dye removal, respectively. MoO 3 dissolutions of 4.12 and 5.6% were obtained for PMF1 and PMF2, respectively, demonstrating the reduced solubility of the coated nanoparticles as compared to their uncoated counterparts (7.87% for MF1 and 18.1% for MF2). In situ small-angle neutron scattering (SANS) was utilized to investigate the polymerization kinetics of PPy and PANI on nanoparticles. The results revealed that an increase in base material oxygen vacancies resulted in the reduction of both the polymer size and the polymerization rate. This study demonstrated that SANS provides valuable insights into the polymer growth mechanisms on nanoparticle surfaces.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.