Wycieki gazu ziemnego z sieci przesyłowej i dystrybucyjnej są poważnym zagrożeniem dla środowiska ze względu na emisję metanu do atmosfery. Niniejszy artykuł stanowi przegląd dostępnych i stosowanych metod wykrywania nieszczelności gazociągów. Opisano w nim metody techniczne, nietechniczne oraz obliczeniowe, szczególnie zwracając uwagę na możliwość wykorzystania tych metod podczas prowadzenia pomiarów wielkości emisji metanu. Słowa kluczowe: gazociągi, sieci gazowe, wykrywanie nieszczelności. An overview of methods for detecting gas network leaks Gas leaks from natural gas transmission and distribution networks are a serious threat to the environment due to the emission of methane into the atmosphere. This article reviews the available and used gas leak detection methods. It also describes the available technical, non-technical and calculation methods including the possible use of these methods when conducting measurements of methane emissions.
Optymalizacja strategii wzorcowania w analizie zawartości lekkich węglowodorów w próbkach stałych metodą chromatografii gazowej z ekstrakcją do fazy nadpowierzchniowej (HS-GC-FID) W artykule opisano proces optymalizacji strategii wzorcowania w analizach lekkich węglowodorów, takich jak wę-glowodory benzynowe i węglowodory aromatyczne z grupy BTEX, w próbkach stałych. Optymalizacja polegała na wykonaniu szeregu analiz próbek gleb zanieczyszczonych w laboratorium, z wykorzystaniem metody chromatografii gazowej z ekstrakcją do fazy nadpowierzchniowej, i zastosowaniu dwóch strategii wzorcowania (ekstrapolacyjnej i interpolacyjnej). Badania miały na celu dobór odpowiedniej strategii wzorcowania, w zależności od typu wykonywanych analiz. W przypadku oznaczania węglowodorów benzynowych lepsza okazała się być metoda interpolacyjna, natomiast dla grupy węglowodorów aromatycznych zadowalające wyniki uzyskano, wykorzystując metodę ekstrapolacyjną z dodatkiem wzorca o stężeniu nie wyższym niż zawartość zanieczyszczenia w badanej próbce.Słowa kluczowe: wzorcowanie, metoda interpolacyjna, metoda ekstrapolacyjna, lekkie węglowodory, chromatografia gazowa, headspace, próbki stałe. Optimization calibration strategy in the content analysis of light hydrocarbons in solid samples by gas chromatography and headspace extraction (HS-GC-FID)The article describes the process of optimizing the strategy calibration analyzes of light hydrocarbons such as C 6 -C 12 and aromatic hydrocarbons from a group of BTEX in solid samples. Optimization included a series of studies in laboratory contaminated soil samples using gas chromatography, and headspace extraction using two strategies of calibration: extrapolation and interpolation. The purpose of the studies was to choose the right strategy for calibration, depending on the type of analyzes. For the determination of C 6 -C 12 hydrocarbons the better method has proved to be the interpolation method, whereas from the group of aromatic hydrocarbons, better results were obtained using the extrapolation method, but the concentration of standard addition should not be higher than the contamination in a real sample.
The article focuses on the problem of air pollution, which is referred to as smog, which, according to the WHO, causes the death of 4.2 million people annually. In Europe, the problem of smog particularly affects Poland, according to WHO data, among the 50 most polluted European cities, as many as 33 are in Poland. Out of concern for the health of the residents, Polish law has given local authorities the opportunity to introduce anti-smog resolutions. Anti-smog resolutions focus mainly on reducing dust emissions from the municipal and housing sector, and according to the data of the National Centre for Balancing and Emissions Management, it is responsible for approximately 49% of dust emissions into the atmosphere in Poland. Małopolska also adopted anti-smog resolutions in 2016 (for the city of Kraków) and 2017 (for the remaining area of the voivodeship). Nevertheless, actions under the implementation of air protection programs in Małopolska have been undertaken much earlier. In the years 2013–2018, 43.6 thousand boilers and stoves using solid fuels were decommissioned in Małopolska, including 22.5 thousand in Kraków alone. The article analyzes the changes in air quality in Małopolska in the years 2012–2020. The data analysis focused on five basic pollutants included in smog (i.e. PM10 and PM2.5 dust, nitrogen oxides, sulfur dioxide and carbon monoxide) and the readings of 8 air quality monitoring stations (3 located in the city of Krakow and 5 stations located outside Krakow). The main purpose of the analysis was to show whether the measures taken in Małopolska lead to the improvement of air quality. For this purpose, both changes in daily average and annual average pollutant concentrations recorded by individual measurement stations, as well as changes in the number of days in the heating season in which the limit values were exceeded were analyzed. The analysis of the available measurement data for the years 2012–2020 clearly showed that there are pollutants for which the permissible content in the air is exceeded many times a year throughout the voivodeship. At the same time, in the analyzed period, there are noticeable decreasing trends in the observed concentrations of individual pollutants in the air, which proves that the measures taken in Małopolska to improve air quality are slowly bringing results.
Zastosowanie techniki spektroskopii w podczerwieni (FT-IR) do oceny stanu zanieczyszczenia gleb węglowodorami W artykule omówiono etapy doboru odpowiednich warunków metody oznaczania sumarycznej zawartości węglo-wodorów w glebie z zastosowaniem spektroskopii w podczerwieni. W wyniku przeprowadzonych badań dobrano sposób wyznaczania tła oraz określono wpływ zmiany kuwety. Wybrano substancję wzorcową, warunki prowadzenia ekstrakcji, dobrano także odpowiednią wielkość próbki analitycznej. Sprawdzono wpływ potencjalnie występujących w próbce interferentów na wynik badań. Opracowana metoda może być stosowana in situ i jest dobrą alternatywą dla standardowo używanych do oznaczania zawartości węglowodorów metod chromatograficznych.Słowa kluczowe: gleba, FT-IR, zanieczyszczenie węglowodorami. Application of Infrared Spectroscopy (FT-IR) to assess the state of soil contamination by hydrocarbonsThe article discusses the steps in the selection of appropriate conditions for the method of determining the total content of hydrocarbons in the soil, using infrared spectroscopy. As a result of research, a method for determining the background and identifying the impact of cell changes were selected. There were also selected, reference substance, the conditions for conducting extraction and analytical sample size. Also examined, was the potential effect of interfering substances presented in the sample on the results. The developed method can be used "in situ" and is a good alternative for chromatographic methods used for the determination of hydrocarbon content.
Emisja metanu z zespołów zaporowo-upustowych W artykule przedstawiono metodologie pomiarów wielkości emisji metanu z zespołów zaporowo-upustowych oraz wyniki pomiarów emisji tego gazu z tego typu obiektów. Zostały one wykorzystane do określenia współczynników emisji metanu dla zespołów zaporowo-upustowych, a następnie do przeprowadzenia inwentaryzacji emisji metanu z dwóch wybranych odcinków gazociągów.Słowa kluczowe: zespoły zaporowo-upustowe, emisja metanu, gazociągi. Methane emission from shut off and relief valve systemsThe article presents the methodology of measurement of methane emissions from shut off and relief valve systems and the results of measurements of methane emissions from such facilities. The measurements were used to determine the methane emission factors from shut off and relief valve systems and then to make an inventory of methane emissions from two selected sections of gas pipelines.
Przegląd metod pomiaru emisji metanu wraz z analizą możliwości ich zastosowania do pomiaru emisji metanu z gazociągów W artykule dokonano przeglądu metod pomiaru emisji metanu stosowanych w gazownictwie. Przedstawiono charakterystykę różnych metod pomiaru jego emisji: korelacyjnej, z zastosowaniem środka spieniającego, z użyciem worków gazoszczelnych, znacznikowych, bilansowych, pomiaru z opływem powietrza, opartych na analizie obrazów rejestrowanych w podczerwieni. Przeanalizowano możliwość zastosowania poszczególnych metod pomiaru emisji metanu do pomiarów emisji z elementów podziemnych (gazociągów). Przeprowadzone analizy wykazały, że do pomiarów emisji metanu z gazociągów najlepiej nadaje się metoda z opływem powietrza.Słowa kluczowe: sieci gazowe, emisja metanu, pomiar emisji metanu.A review of methane emission measurement methods along with an analysis of their applicability to the measurement of methane emissions from gas pipelines This article reviews methane emission measurement methods used in the gas industry. The characteristics of the methane emission measurement methods: correlation methods, soapy water methods, bagging methods, indicator methods, direct flow measurement method and pressure decay method, air flow methods and infrared imaging techniques. The possibility of applying individual methods of measurement of methane emissions for measurements of underground elements (gas pipelines) has been analyzed. The analyzes carried out showed that for methane emission from gas pipelines the air flow method is best suited.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
hi@scite.ai
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.