a b s t r a c tThe durability against light and aging dynamics of heteroatomic aromatic dyes and pigments containing nitrogen atoms used in writing inks was studied using Raman spectroscopy. The mechanisms of their thermal and photo-decomposition were proposed and the rates of these processes were determined. According to Raman spectroscopy, it was found that depending on the presence of one or another colorant, there are three main types (Type A, Type B and Type C) of blue dye inks used in ballpoint, gel and capillary pens which were studied in this work. Each type is characterized by a certain set of signals in Raman spectra. Time dependencies of Raman signal intensities for each type revealed the dynamics of the processes occurred with colorants included in the studied inks from the moment when they were printed on paper. Thus, the results obtained in this study can be used for the age estimation of the paper documents up to 15 years.

This work is devoted to the extremely popular but poorly developed scientific and forensic problem of the estimation of the actual dates of inscriptions placed on paper and made by ballpoint pens. It is shown that the degradation of writing inks with time may be controlled via Raman spectroscopy and gas chromatography. The time intervals for the implementation of each of these methods were determined using the ratios of the Raman peak intensities as degradation characteristics rather than their absolute values. In turn, this eliminates the effect of the concentration of a dye. The mutual influence of the volatile components and dyes of writing inks was also investigated and the time interval within which such influence is critical was found. According to the obtained results, a new methodological scheme for determining the age of documents, which were created at least 40 months ago, was proposed.

The interaction of alkoxysilanes with nanoscaled giant polyoxoclusters is a challenging route for efficiently building blocks for supramolecular smart-tune design. 3-aminopropyltrimethoxysilane (APTMS) treatment grafts amino groups onto the surface of...

No abstract

In this paper, we propose a fast and simple approach for the fabrication of the electrocatalytically active ruthenium-containing microstructures using a laser-induced metal deposition technique. The results of scanning electron microscopy and electrical impedance spectroscopy (EIS) demonstrate that the fabricated ruthenium-based microelectrode had a highly developed surface composed of 10 μm pores and 10 nm zigzag cracks. The fabricated material exhibited excellent electrochemical properties toward non-enzymatic dopamine sensing, including high sensitivity (858.5 and 509.1 μA mM−1 cm−2), a low detection limit (0.13 and 0.15 μM), as well as good selectivity and stability.