Compliant battery design strategy for wearable power sources with high degree of flexibility and stretchability.

All-printed organic photodiode arrays on plastic are reported with average specific detectivities of 3.45 × 10(13) cm Hz(0.5) W(-1) at a bias of -5 V. The blade-coated polyethylenimine cathode interlayer and active layer, and screen-printed anode enable precise device performance tunability and excellent homogeneity at centimetric scales. These devices' high operational reverse bias, good linear dynamic range, and bias stress stability make them attractive for implementation in imaging systems.

Additive and low-temperature printing processes enable the integration of diverse electronic devices, both power-supplying and power-consuming, on flexible substrates at low cost. Production of a complete electronic system from these devices, however, often requires power electronics to convert between the various operating voltages of the devices. Passive components—inductors, capacitors, and resistors—perform functions such as filtering, short-term energy storage, and voltage measurement, which are vital in power electronics and many other applications. In this paper, we present screen-printed inductors, capacitors, resistors and an RLC circuit on flexible plastic substrates, and report on the design process for minimization of inductor series resistance that enables their use in power electronics. Printed inductors and resistors are then incorporated into a step-up voltage regulator circuit. Organic light-emitting diodes and a flexible lithium ion battery are fabricated and the voltage regulator is used to power the diodes from the battery, demonstrating the potential of printed passive components to replace conventional surface-mount components in a DC-DC converter application.

No abstract

We developed robust, gravure-printed, transparent conductors based on silver nanowires embedded in an indium zinc oxide matrix.

No abstract

ALD ZnO precursors diffuse into the disordered regions of a P3HT film yielding the bulk heterojunction morphology for hybrid photovoltaics.

Additive–metal interactions can induce additive migration to the organic/electrode interface to spontaneously form interlayers that affect the metal work function and enhance OPV device performance.