Recent results of the searches for Supersymmetry in final states with one or two leptons at CMS are presented. Many Supersymmetry scenarios, including the Constrained Minimal Supersymmetric extension of the Standard Model (CMSSM), predict a substantial amount of events containing leptons, while the largest fraction of Standard Model background events -which are QCD interactions -gets strongly reduced by requiring isolated leptons. The analyzed data was taken in 2011 and corresponds to an integrated luminosity of approximately L = 1 fb −1 . The center-of-mass energy of the pp collisions was √ s = 7 TeV.

No abstract

A simple analytical model is developed that allows efficient absolute dose reconstruction in patients undergoing radiation treatments using proton beams. The model is based on the solution of the inverse problem of dose recovery from the 3D information contained in the PET signal, obtained immediately after the treatment. The core of the proposed model lies in the analytical calculation of the introduced positron emitters' species matrix (PESM) or kernel, facilitated by previously developed theoretical calculations of the proton energy fluence distribution. Once the PESM is known, the absolute dose distribution in a patient can be found from the deconvolution of the 3D activity distribution obtained from the PET scanner with the calculated species matrix. As an example, we have used FLUKA Monte Carlo code to simulate the delivery of the radiation dose to a tissue phantom irradiated by a parallel-opposed beam arrangement and calculated the resultant total activity. Deconvolution of the calculated activity with the PESM leads to the reconstructed dose being within 2% of that delivered.

In this paper, we present the shielding analysis to determine the necessary neutron and photon shielding for a laser-accelerated proton therapy system. Laser-accelerated protons coming out of a solid high-density target have broad energy and angular spectra leading to dose distributions that cannot be directly used for therapeutic applications. A special particle selection and collimation device is needed to generate desired proton beams for energy- and intensity-modulated proton therapy. A great number of unwanted protons and even more electrons as a side-product of laser acceleration have to be stopped by collimation devices and shielding walls, posing a challenge in radiation shielding. Parameters of primary particles resulting from the laser-target interaction have been investigated by particle-in-cell simulations, which predicted energy spectra with 300 MeV maximum energy for protons and 270 MeV for electrons at a laser intensity of 2 x 10(21) W cm(-2). Monte Carlo simulations using FLUKA have been performed to design the collimators and shielding walls inside the treatment gantry, which consist of stainless steel, tungsten, polyethylene and lead. A composite primary collimator was designed to effectively reduce high-energy neutron production since their highly penetrating nature makes shielding very difficult. The necessary shielding for the treatment gantry was carefully studied to meet the criteria of head leakage <0.1% of therapeutic absorbed dose. A layer of polyethylene enclosing the whole particle selection and collimation device was used to shield neutrons and an outer layer of lead was used to reduce photon dose from neutron capture and electron bremsstrahlung. It is shown that the two-layer shielding design with 10-12 cm thick polyethylene and 4 cm thick lead can effectively absorb the unwanted particles to meet the shielding requirements.

Robotic radiosurgery system has been increasingly employed for extracranial treatments. This work is aimed to study the feasibility of a cylindrical diode array and a planar ion chamber array for patient‐specific QA with this robotic radiosurgery system and compare their performance. Fiducial markers were implanted in both systems to enable image‐based setup. An in‐house program was developed to postprocess the movie file of the measurements and apply the beam‐by‐beam angular corrections for both systems. The impact of noncoplanar delivery was then assessed by evaluating the angles created by the incident beams with respect to the two detector arrangements and cross‐comparing the planned dose distribution to the measured ones with/without the angular corrections. The sensitivity of detecting the translational (1–3 mm) and the rotational (1°–3°) delivery errors were also evaluated for both systems. Six extracranial patient plans (PTV 7–137 cm3) were measured with these two systems and compared with the calculated doses. The plan dose distributions were calculated with ray‐tracing and the Monte Carlo (MC) method, respectively. With 0.8 by 0.8 mm2 diodes, the output factors measured with the cylindrical diode array agree better with the commissioning data. The maximum angular correction for a given beam is 8.2% for the planar ion chamber array and 2.4% for the cylindrical diode array. The two systems demonstrate a comparable sensitivity of detecting the translational targeting errors, while the cylindrical diode array is more sensitive to the rotational targeting error. The MC method is necessary for dose calculations in the cylindrical diode array phantom because the ray‐tracing algorithm fails to handle the high‐Z diodes and the acrylic phantom. For all the patient plans, the cylindrical diode array/ planar ion chamber array demonstrate 100%/>;92%false(3%/3 mmfalse) passing rates. The feasibility of using both systems for robotic radiosurgery system patient‐specific QA has been demonstrated. For gamma evaluation, 2%/2 mm criteria for cylindrical diode array and 3%/3 mm criteria for planar ion chamber array are suggested. The customized angular correction is necessary as proven by the improved passing rate, especially with the planar ion chamber array system.PACS number: 29.40.‐n