Ultra-definition, large-area displays with three-dimensional visual effects represent megatrend in the current/future display industry. On the hardware level, such a “dream” display requires faster pixel switching and higher driving current, which in turn necessitate thin-film transistors (TFTs) with high mobility. Amorphous oxide semiconductors (AOS) such as In-Ga-Zn-O are poised to enable such TFTs, but the trade-off between device performance and stability under illumination critically limits their usability, which is related to the hampered electron-hole recombination caused by the oxygen vacancies. Here we have improved the illumination stability by substituting oxygen with nitrogen in ZnO, which may deactivate oxygen vacancies by raising valence bands above the defect levels. Indeed, the stability under illumination and electrical bias is superior to that of previous AOS-based TFTs. By achieving both mobility and stability, it is highly expected that the present ZnON TFTs will be extensively deployed in next-generation flat-panel displays.

Interest in oxide semiconductors stems from benefits, primarily their ease of process, relatively high mobility (0.3–10 cm2/vs), and wide-bandgap. However, for practical future electronic devices, the channel mobility should be further increased over 50 cm2/vs and wide-bandgap is not suitable for photo/image sensor applications. The incorporation of nitrogen into ZnO semiconductor can be tailored to increase channel mobility, enhance the optical absorption for whole visible light and form uniform micro-structure, satisfying the desirable attributes essential for high performance transistor and visible light photo-sensors on large area platform. Here, we present electronic, optical and microstructural properties of ZnON, a composite of Zn3N2 and ZnO. Well-optimized ZnON material presents high mobility exceeding 100 cm2V−1s−1, the band-gap of 1.3 eV and nanocrystalline structure with multiphase. We found that mobility, microstructure, electronic structure, band-gap and trap properties of ZnON are varied with nitrogen concentration in ZnO. Accordingly, the performance of ZnON-based device can be adjustable to meet the requisite of both switch device and image-sensor potentials. These results demonstrate how device and material attributes of ZnON can be optimized for new device strategies in display technology and we expect the ZnON will be applicable to a wide range of imaging/display devices.

For practical device applications, monolayer transition metal dichalcogenide (TMD) films must meet key industry needs for batch processing, including the high‐throughput, large‐scale production of high‐quality, spatially uniform materials, and reliable integration into devices. Here, high‐throughput growth, completed in 12 min, of 6‐inch wafer‐scale monolayer MoS2 and WS2 is reported, which is directly compatible with scalable batch processing and device integration. Specifically, a pulsed metal–organic chemical vapor deposition process is developed, where periodic interruption of the precursor supply drives vertical Ostwald ripening, which prevents secondary nucleation despite high precursor concentrations. The as‐grown TMD films show excellent spatial homogeneity and well‐stitched grain boundaries, enabling facile transfer to various target substrates without degradation. Using these films, batch fabrication of high‐performance field‐effect transistor (FET) arrays in wafer‐scale is demonstrated, and the FETs show remarkable uniformity. The high‐throughput production and wafer‐scale automatable transfer will facilitate the integration of TMDs into Si‐complementary metal‐oxide‐semiconductor platforms.

We have demonstrated a self-aligned top-gate amorphous gallium indium zinc oxide thin film transistor (a-GIZO TFT). It had a field effect mobility of 5 cm2/V s, a threshold voltage of 0.2 V, and a subthreshold swing of 0.2 V/decade. Ar plasma was treated on the source/drain region of the a-GIZO active layer to reduce the series resistance. After Ar plasma treatment, the surface of the source/drain region was divided into In-rich and In-deficient regions. The a-GIZO TFT also had a constant sheet resistance of 1 kΩ/◻ for a film thickness of over 40 nm. The interface between the source/drain Mo metal and the Ar plasma-treated a-GIZO indicated a good Ohmic contact and a contact resistivity of 50 μΩ cm2.

No abstract