The Fast-Steering secondary mirror (FSM) of Giant Magellan Telescope (GMT) consists of seven 1.1m diameter segments with effective diameter of 3.2m. Each of the seven segments is held by three axial supports and a central lateral support with a vacuum system to mirror gravity compensations. The mirror assembly has a tip-tilt feature capable of guiding to attenuate telescope wind shake and mount control jitter. Both on-axis and off-axis mirror segments were optimized under various design considerations using finite element analyses and optical performance analyses. An integrated model of the mirror cell assembly was developed including sub-assembly parts consisting of axial supports, lateral support, breakaway mechanism, seismic restraints, and pressure seal. In this paper for the optimized FSM mirror and mirror cell assembly, the design considerations are addressed, and performance prediction results are discussed in detail with respect to the specifications.
The Fast Steering Secondary Mirror (FSM) for the Giant Magellan Telescope (GMT) will have seven 1.05 m diameter circular segments and rapid tip-tilt capability to stabilize images under wind loading. In this paper, we report on the assembly, integration, and test (AIT) plan for this complex opto-mechanical system. Each fast-steering mirror segment has optical, mechanical, and electrical components that support tip-tilt capability for fine coalignment and fast guiding to attenuate wind shake and jitter. The components include polished and lightweighted mirror, lateral support, axial support assembly, seismic restraints, and mirror cell. All components will be assembled, integrated and tested to the required mechanical and optical tolerances following a concrete plan. Prior to assembly, fiducial references on all components and subassemblies will be located by three-dimensional coordinate measurement machines to assist with assembly and initial alignment. All electronics components are also installed at designed locations. We will integrate subassemblies within the required tolerances using precision tooling and jigs. Performance tests of both static and dynamic properties will be conducted in different orientations, including facing down, horizontal pointing, and intermediate angles using custom tools. In addition, the FSM must be capable of being easily and safely removed from the top-end assemble and recoated during maintenance. In this paper, we describe preliminary AIT plan including our test approach, equipment list, and test configuration for the FSM segments.
The Giant Magellan Telescope (GMT) will feature two Gregorian secondary mirrors, an adaptive secondary mirror (ASM) and a fast-steering secondary mirror (FSM). The FSM has an effective diameter of 3.2 m and consists of seven 1.1 m diameter circular segments, which are conjugated 1:1 to the seven 8.4m segments of the primary. Each FSM segment contains a tip-tilt capability for fast guiding to attenuate telescope wind shake and mount control jitter. This tiptilt capability thus enhances performance of the telescope in the seeing limited observation mode. The tip-tilt motion of the mirror is produced by three piezo actuators. In this paper we present a simulation model of the tip-tilt system which focuses on the piezo-actuators. The model includes hysteresis effects in the piezo elements and the position feedback control loop.
No abstract
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.
customersupport@researchsolutions.com
10624 S. Eastern Ave., Ste. A-614
Henderson, NV 89052, USA
Copyright © 2024 scite LLC. All rights reserved.
Made with 💙 for researchers
Part of the Research Solutions Family.