Thermal barrier coatings (TBCs) can effectively protect the alloy substrate of hot components in aeroengines or land-based gas turbines by the thermal insulation and corrosion/erosion resistance of the ceramic top coat. However, the continuous pursuit of a higher operating temperature leads to degradation, delamination, and premature failure of the top coat. Both new ceramic materials and new coating structures must be developed to meet the demand for future advanced TBC systems. In this paper, the latest progress of some new ceramic materials is first reviewed. Then, a comprehensive spalling mechanism of the ceramic top coat is summarized to understand the dependence of lifetime on various factors such as oxidation scale growth, ceramic sintering, erosion, and calcium-magnesium-aluminium-silicate (CMAS) molten salt corrosion. Finally, new structural design methods for high-performance TBCs are discussed from the perspectives of lamellar, columnar, and nanostructure inclusions. The latest developments of ceramic top coat will be presented in terms of material selection, structural design, and failure mechanism, and the comprehensive guidance will be provided for the development of next-generation advanced TBCs with higher temperature resistance, better thermal insulation, and longer lifetime.
The Eu-doped yttria (Y2O3:Eu3+) has been investigated by the in situ high-pressure angle dispersive synchrotron X-ray diffraction (XRD) and the photoluminescence (PL) spectroscopy. The red shift and intensity ratio variation of emissions with increasing pressure were observed and elucidated. It was found that the red shift of emissions is related to the expansion of the f orbit of the Eu3+ and the intensity ratio variation of emissions is ascribed to the change of the crystal field under high pressure. The pressure-induced changes in spectrum are related to the phase transition, which was confirmed by XRD pattern. The two high pressure phases were identified as the monoclinic (C2/m) phase and hexagonal (P-3m1) phase by the Rietveld refinement.
When predicting volunteer intention, much attention is paid to the volunteer organization environment (VOE). Given that self-efficacy and motivation have emerged as important predictors of volunteer intention, we adopted a combination of ideas of Bandura's social cognitive theory and Ajzen's theory of planned behavior integrating VOE, self-efficacy and motivation to examine their effects on volunteer intention and to determine whether self-efficacy and motivation mediate the relationship between VOE and volunteer intention. The subjects of this study consisted of 198 community health volunteers in Shanghai city, China. Exploratory factor analysis was performed to identify the factor structure using standard principal component analysis. Six new factors were revealed, including two VOE factors, relation with organization and support from government; two motivation factors, personal attitude and social recognition; self-efficacy and volunteer intention. The results of a hierarchical regression analysis indicated that relation with organization accounted for 14.8% of the variance in volunteer intention, and support from government failed to add significantly to variance in volunteer intention; self-efficacy and personal attitude motivation partially mediated the effects of relation with organization on volunteer intention; social recognition motivation did not mediate the relationship between relation with organization and volunteer intention; and relation with organization, self-efficacy and personal attitude motivation accounted for 33.7% of the variance in volunteer intention. These results provide support for self-efficacy and personal attitude motivation as mediators and provide preliminary insight into the potential mechanisms for predicting volunteer intention and improving volunteering by integrating VOE, self-efficacy and motivation factors.
In this study, high pressure infrared (IR) absorption and Raman scattering studies for ammonium azide (NH4N3) were carried out at room temperature up to 20 GPa and 22 GPa, respectively. For comparison and further assignment, the vibrational spectra at ambient conditions were calculated using CASTEP code, particularly for the far- and mid-IR modes. The recorded vibrational data consistently indicated a pressure-induced phase transition at 2.9 GPa. All observed vibrational modes maintained their identities at the high pressure phase, indicating that NH4N3 was still presented in the form of ammonium cations and azide anions linked by the hydrogen bond (N-H⋯N). Above 2.9 GPa, the relative magnitude of the torsional mode weakened and the N-H symmetric stretch displayed a redshift, indicating strengthened hydrogen bonding energy. The opposite effects were observed above 12 GPa, where the relative magnitude of the torsional mode strengthened and the N-H symmetric stretch reverted to a blueshift, indicating weakened hydrogen bonding energy. It can be concluded that the hydrogen bonding energy exhibited a weakening (0-2.9 GPa), strengthening (2.9-12 GPa), and then again weakening (12-22 GPa) phenomena with the increasing of compression. The hydrogen bonding energy changing with the increase of pressure can be ascribed to a phase transition at 2.9 GPa and a rotational or bending behavior of azide ions at 12 GPa.
A novel, efficient and simple method for synthesizing SnSe nanosheets, and their pressure-induced structural transition behaviours have been investigated.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.