No abstract

No abstract

We have investigated the effect of mannitol, sorbitol, methyl alpha-D-mannopyranoside, lactose, trehalose, and cellobiose on the stability and structure of the pharmaceutical protein recombinant human growth hormone (rhGH) in the lyophilized state. All excipients afforded significant protection of the protein against aggregation, particularly at levels to potentially satisfy water-binding sites on the protein in the dried state (i.e., 131:1 excipient-to-protein molar ratio). At higher excipient-to-protein ratios, X-ray diffraction studies showed that mannitol and sorbitol were prone to crystallization and afforded somewhat less stabilization than at lower ratios where the excipient remained in the amorphous, protein-containing phase. The secondary structure of rhGH was determined using Fourier transform infrared (FTIR) spectroscopy. rhGH exhibited a decrease in alpha-helix and increase in beta-sheet structures upon drying. Addition of excipient stabilized the secondary structure upon lyophilization to a varying extent depending on the formulation. Samples with a significant degree of structural conservation, as indicated by the alpha-helix content, generally exhibited reduced aggregation. In addition, prevention of protein-protein interactions (indicated by reduced beta-sheet formation) also tended to result in lower rates of aggregation. Therefore, in addition to preserving the protein structure, bulk additives that do not crystallize easily and remain amorphous in the solid state can be used to increase protein-protein distance and thus prevent aggregation.

No abstract

Sustained release of pharmaceutical proteins from biocompatible polymers offers new opportunities in the treatment and prevention of disease. The manufacturing of such sustained-release dosage forms, and also the release from them, can impose substantial stresses on the chemical integrity and native, three-dimensional structure of proteins. Recently, novel strategies have been developed towards elucidation and amelioration of these stresses. Non-invasive technologies have been implemented to investigate the complex destabilization pathways that can occur. Such insights allow for rational approaches to protect proteins upon encapsulation and release from bioerodible systems. Stabilization of proteins when utilizing the most commonly employed procedure, the water-in-oil-in-water (w/o/w) double emulsion technique, requires approaches that are based mainly on either increasing the thermodynamic stability of the protein or preventing contact of the protein with the destabilizing agent (e.g. the water/oil interface) by use of various additives. However, protein stability is still often problematic when using the w/o/w technique, and thus alternative methods have become increasingly popular. These methods, such as the solid-in-oil-in-oil (s/o/o) and solid-in-oil-in-water (s/o/w) techniques, are based on the suspension of dry protein powders in an anhydrous organic solvent. It has become apparent that protein structure in the organic phase is stabilized because the protein is "rigidified" and therefore unfolding and large protein structural perturbations are kinetically prohibited. This review focuses on strategies leading to the stabilization of protein structure when employing these different encapsulation procedures.

No abstract

The purpose of this research was to investigate the shape and morphology of various spray-dried protein powders as a function of spray-drying conditions and protein formulations. A benchtop spray dryer was used to spray dry three model proteins in formulation with a sugar or a surfactant. Physical characterizations of the powder included morphology (scanning electron microscopy), particle size, residual moisture, and X-ray powder diffraction analyses. A significant change in particle shape from irregular (e.g., "donut") to spherical was observed as the outlet temperature of the dryer was decreased. The drying air outlet temperature was shown to depend on various operating parameters and was found to correlate with the drying rate of atomized droplets in the drying chamber. The morphology of spray-dried protein particles was also affected by formulation. In protein:sugar formulations, spray-dried particles exhibited a smooth surface regardless of the protein-to-lactose ratio, whereas roughness was observed when mannitol was present at > 30% of total solids, due to recrystallization. Protein particles containing trehalose at concentrations > 50% were highly agglomerated. The presence of surfactant resulted in noticeably smoother, more spherical particles. The shape and the morphology of spray-dried powders are affected by spray drying conditions and protein formulation. This study provides information useful for development of dry proteins for fine powder (e.g., aerosol) applications.

No abstract