In the present contribution, the aim is to explore and establish a way in which 3D printing and gastro-retentive drug delivery systems (GRDDSs) are combined (focusing on inner structure innovation) to achieve extended and stable gastro-retention and controlled-release of drug. Three digital models diverse in construction were designed and substantialized by a pressure-assisted microsyringe (PAM) 3D printer. Preparations were characterized by means of DSC, XRD, FTIR, and SEM. In vitro buoyancy study and in vivo gamma scintigraphy method were conducted to validate gastro-retention property of these innovative preparations in vitro/in vivo respectively. Release kinetic model was established and release mechanism was discussed. Tablets manufactured under certain range of parameters (intersecting angle, full filling gap) were tight and accurate in shape. Tablets printed with specific parameters (full filling gap, 50%; nozzle extrusion speed, 0.006 mm/s; layer height, 0.4 mm; compensation value, 0.25; quantity of layers, 15; outline printing value, 2) exhibited satisfactory in vitro (10-12 h)/in vivo (8-10 h) retention ability and possessed stable 10-12 h controlled-release quality. In general, 3D printing has tremendous advantage over conventional fabrication technique in intricate drug delivery systems and will be widely employed in pharmacy.
Abstract. The aim of this study was to design a polyethylene oxide (PEO) binary hydrophilic matrix controlled system and investigate the most important influence(s) on the in vitro water-insoluble drug release behavior of this controlled system. Direct-compressed PEO binary matrix tablets were obtained from a variety of low viscosity hydrophilic materials as a sustained agent, using anhydrous drugs as a model drug. Water uptake rate, swelling rate, and erosion rate of matrices were investigated for the evaluation of the PEO hydrophilic matrix systems. The effect of the dose, the solubility of water-insoluble drug, and the rheology of polymers on in vitro release were also discussed. Based on the in vitro release kinetics study, three optimized PEO binary matrices were selected for further research. And, these PEO binary matrices had shown the similar release behavior that had been evaluated by the similarity factor f 2 . Further study indicated that they had identical hydration, swelling, and erosion rate. Moreover, rheology study exhibited the similar rheological equation of Herschel-Bulkley and their viscosity was also within the same magnitude. Therefore, viscosity plays the most important role to control drug release compared to other factors in PEO binary matrix system. This research provides fundamental understanding of in vitro drug release of PEO binary hydrophilic matrix tablets and helps pharmaceutical workers to develop a hydrophilic controlled system, which will effectively shorten the process of formulation development by reducing trial-and-error.
The aim of the work presented is to prepare a controlled-release hydrophilic matrix tablet (CMT) controlling release of highly water-soluble drug applying pure combination of high- and low-Mw PEO as matrix materials, to avoid the lag time of drug release, and to overcome incomplete release in later stages. The influences of types and amounts of different Mw PEOs used, drug loading, pH of release medium and agitation rate on drug release were evaluated. The study of uptake and erosion of matrix was conducted and mechanism of improving drug release was discussed. In vivo pharmacokinetics of the CMT and reference preparation self-made controlled-release osmotic pump tablets (COPT) were performed in beagle dogs. The optimized formulation containing 43% PEO WSR 303 and 32% PEO N750 showed a zero order release from 1 h to 12 h. In vivo results demonstrated that the CMT had similar AUC and C with the COPT but smaller T than the COPT and provided a more stable therapeutic concentration compared to the COPT. In conclusion, hydrophilic matrix tablet combining only different Mw PEOs as matrix materials had very good potential to be developed into a controlled-release drug delivery system for highly water-soluble drug. Besides, its manufacturing processes were succinct which would be preferable for modern medicine industry.
scite is a Brooklyn-based organization that helps researchers better discover and understand research articles through Smart Citations–citations that display the context of the citation and describe whether the article provides supporting or contrasting evidence. scite is used by students and researchers from around the world and is funded in part by the National Science Foundation and the National Institute on Drug Abuse of the National Institutes of Health.