Melt blending poly(L-lactide) (PLLA) with various biodegradable polymers has been thought to be the most economic and effective route to toughen PLLA without compromising its biodegradability. Unfortunately, only very limited improvement in notched impact toughness can be achieved, although most of these blends show significant enhancement in tensile toughness. In this work, biodegradable poly(ε-caprolactone) (PCL) was used as an impact modifier to toughen PLLA and a nucleating agent was utilized to tailor the crystallization of PLLA matrix. Depending on the nucleating agent concentrations in the matrix and mold temperatures in injection molding, PLLA/PCL blends with a wide range of matrix crystallinity (10-50%) were prepared by practical injection molding. The results show that there is a linear relationship between PLLA matrix crystallinity and impact toughness. With the increase in PLLA crystalline content, toughening becomes much easier to achieve. PLLA crystals are believed to provide a path for the propagation of shear yielding needed for effective impact energy absorption, and then, excellent toughening effect can be obtained when these crystals percolate through the whole matrix. This investigation provides not only a new route to prepare sustainable PLLA products with good impact toughness but also a fresh insight into the importance of matrix crystallization in the toughening of semicrystalline polymers with a flexible polymer.

Recently, some attempts have been made to enhance the gas barrier properties of semicrystalline polymers by precisely controlling the arrangement of their impermeable crystalline lamellae. However, it is still a great challenge to achieve regular arrangement of the lamellae along the direction perpendicular to the gas diffusion path, especially using conventional polymer processing technologies. This work presents a novel and simple strategy to dramatically improve oxygen barrier performance of biobased and biodegradable polylactide (PLA) through constructing parallel-aligned shish-kebab-like crystals with well-interlocked boundaries with the aid of a highly active nucleating agent. The nucleating agent was introduced into PLA by melting compounding and the sheet-like specimens were fabricated by compression molding. We demonstrate that the fibrillar nucleating agent dispersed in PLA melt can serve as shish to induce the change of crystallization habit of PLA from isotopic spherulitic crystals to unique shish-kebab-like crystals and the shear flow in the compression molding can induce the highly ordered alignment of the nucleating agent fibrils as well as the subsequent shish-kebab-like crystals along the direction parallel to the sheet surface. More importantly, the growing lamellae are found to interpenetrate and tightly interlock with each other at the boundary regions of the shish-kebab-like crystals in the later stage of the crystallization, forming a densely packed nanobrick wall structure to prevent gas molecules from permeating through the crystals and thus imparting the PLA sheets with unprecedentedly low oxygen permeability. This work provides not only a successful example of preparing semicrystalline polymer with super gas barrier properties by tailoring crystal superstructure but also a promising route to rapidly fabricate high-performance food packaging materials via industrially meaningful melt processing.

No abstract

No abstract

No abstract

Inorganic nanofillers are often added into polymer/elastomer blends as a third component to modify their performance. This work aims to clarify the role of interface-localized spherical nanoparticles in determining the impact toughness of polymer blends. The selective distribution of titanium dioxide (TiO2) nanoparticles in poly(L-lactide)/poly(ether) urethane (PLLA/PU) blends was investigated by using scanning electron microscope. It is interesting to find that, regardless of the method of TiO2 introduction, nano-TiO2 particles are always selectively localized at the phase interface between PLLA and PU, leading to a significant improvement in notched Izod impact toughness. The moderately weakened interfacial adhesion induced by the interfacially-localized nano-TiO2 particles is believed to be the main reason for the largely enhanced impact toughness

Preparing super-tough and heat-resistant PLLA/elastomer blends by constructing stereocomplex crystallites at the interface to simultaneously tailor interface and matrix properties.

A new electric double percolation was realized via carbon black selfnetworking induced co-continuous like morphology (composed of disconnected PU clusters and bands) in polylactide/poly(ether) urethane (PLA/PU) blends. As a result, a simultaneous improvement in electrical conductivity and impact toughness of the blends without compromising strength and modulus has been achieved.