No abstract

No abstract

One of the simplest and most effective individual measures is to wear a mask to prevent the spread of respiratory droplets from carriers to healthy people and patients admitted to corona wards and their staff. This research aimed to investigate the contamination of internal and external surfaces of various masks used by patients and staff with SARS coronavirus, as well as the possibility of airborne transmission in Imam Khomeini Hospital, Ardabil. For this purpose, twenty-five staff members and ten patients participated voluntarily in this cross-sectional study. Sampling was performed using swaps on both sides (inside and outside) of various surgical masks, N-95, and filtering face piece FFP2 through standard methods in compliance with the relevant conditions and from a surface of at least 5 cm 2 . Next, the collected samples were immediately transferred to a laboratory and analyzed by real-time PCR method to detect the presence of SARS-CoV-2 virus after viral genome extraction. Based on the obtained results, from a total of 30 collected samples (25 of personnel masks plus 5 samples of hospitalized patients’ masks). A total of 60 masks were sampled. For every collected sample, the researchers studied both inside and outside of the mask. Upon analyzing the data, it was showed that 6 mask samples were positive for the presence of coronavirus. Nonetheless, all samples taken from both inside and outside of the personnel masks (N-95 and FFP2 types of masks) were negative. Among the 6 positive samples, four cases were related to the internal part, one case to the outer part of the three-layer surgical masks, and one to the outer part of the N-95 masks in hospitalized patients. As masks reduce the concentration of virus particles, they can play an important role in creating immunity.

No abstract

Gamma rays pose enough energy to induce chemical changes that may be biologically important for the normal functioning of body cells. The external exposure of human beings to natural environmental gamma radiation normally exceeds that from all man-made sources combined. In this research natural background gamma dose rates and corresponding annual effective doses were determined for selected cities of Ardebil province. Outdoor gamma dose rates were measured using an Ion Chamber Survey Meter in 105 locations in selected districts. Average absorbed doses for Ardebil, Sar-Ein, Germy, Neer, Shourabil Recreational Lake, and Kosar were determined as 265, 219, 344, 233, 352, and 358 nSv/h, respectively. Although dose rates recorded for Germi and Kosar are comparable with some areas with high natural radiation background, however, the dose rates in other districts are well below the levels reported for such locations. Average annual effective dose due to indoor and outdoor gamma radiation for Ardebil province was estimated as 1.73 (1.35–2.39) mSv, which is on average 2 times higher than the world population weighted average.

No abstract

No abstract

Microbial quality and physical-chemical properties of recreational spas were surveyed to investigate the health aspect of the spas' water. A total of 195 samples were collected from pools and springs of the spas in five sites from Ardebil Province of Iran. The effects of an independent factor defined as 'condition' and its component sub-factors (i.e., sampling point, location, and sampling date) on microbial quality and physical-chemical properties of the spas were studied by applying path analysis. The influence of physical-chemical properties on microbial quality was also considered. The percentage of samples exceeding the ISIRI (Swimming pool water microbiological specifications (vol 9412), Institute of Standards and Industrial Research of Iran, Tehran, 2007) limits for Staphylococcus (spp.) was up to 55.8 in the springs and 87.8 in the pools, 58.1 and 99.2 for HPC, 90.7 and 97.8 for total coliform and fecal coliform, and 9.3 and 34.4 for Pseudomonas aeruginosa, respectively. There were significant differences between the pools and springs for both physical-chemical properties and microbial quality. From the path analysis, sampling point was the most effective sub-factor of 'condition' on both the physical-chemical properties and microbial quality. Among the physical-chemical properties, water color had the most enhancing or additive influence on microbial pollution, while EC indicated a reducing or subtractive effect.