We report the fabrication of triangular lattices of parallel gold and silver nanowires of high optical quality, with diameters down to 500 nm and length-to-diameter ratios as high as 100 000. The nanowires are supported by a silica glass matrix and are disposed around a central solid glass core, i.e., a missing nanowire. These centimeter-long structures make it possible to trap light within an array of nanowires and characterize the plasmon resonances that form at specific optical frequencies. Such nanowire arrays have many potential applications, e.g., imaging on the subwavelength scale

We present experimental results on coupling to surface plasmon modes on gold nanowires selectively introduced into polarization-maintaining photonic crystal fibers. Highly polarization- and wavelength-dependent transmission is observed. In one sample 24.5 mm long, the transmission on and off resonance differs by as much as 45 dB. Near-field optical images of the light emerging from such a gold-filled fiber show light guided on the wire at surface plasmon resonances. Finite element simulations are in good agreement with the experimental results. These gold-filled fibers can be potentially used as in-fiber wavelength-dependent filters and polarizers and as near-field tips for sub-wavelength-scale imaging. (C) 2008 American Institute of Physics

We report a novel splicing-based pressure-assisted melt-filling technique for creating metallic nanowires in hollow channels in microstructured silica fibers. Wires with diameters as small as 120 nm (typical aspect ration 50:1) could be realized at a filling pressure of 300 bar. As an example we investigate a conventional single-mode step-index fiber with a parallel gold nanowire (wire diameter 510 nm) running next to the core. Optical transmission spectra show dips at wavelengths where guided surface plasmon modes on the nanowire phase match to the glass core mode. By monitoring the side-scattered light at narrow breaks in the nanowire, the loss could be estimated. Values as low as 0.7 dB/mm were measured at resonance, corresponding to those of an ultra-long-range eigenmode of the glass-core/nanowire system. By thermal treatment the hollow channel could be collapsed controllably, permitting creation of a conical gold nanowire, the optical properties of which could be monitored by side-scattering. The reproducibility of the technique and the high optical quality of the wires suggest applications in fields such as nonlinear plasmonics, near-field scanning optical microscope tips, cylindrical polarizers, optical sensing and telecommunications.

Using a selective hole closure technique, individual hollow channels in silica-air photonic crystal fibers are filled with pure Ge by pumping in molten material at high pressure. The smallest channels filled so far are 600 nm in diameter, which is 10x smaller than in previous work. Electrical conductivity and micro-Raman measurements indicate that the resulting cm-long wires have a high degree of crystallinity. Optical transmission spectra are measured in a sample with a single wire placed adjacent to the core of an endlessly single-mode photonic crystal fiber. This renders the fiber birefringent, as well as causing strongly polarization-dependent transmission losses, with extinction ratios as high as 30 dB in the visible. In the IR, anti-crossings between the glass-core mode and resonances on the high index Ge wire create a series of clear dips in the spectrum transmitted through the fiber. The measurements agree closely with the results of finite-element simulations in which the wavelength dependence of the dielectric constants is taken fully into account. A toy model based on a multilayer structure is used to help interpret the results. Finally, the temperature dependence of the anti-crossing wavelengths is measured, the preliminary results suggesting that the structure might form the basis of a compact optical thermometer. Since Ge provides electrical conductance together with low-loss guidance in the mid-IR, Ge-filled PCF seems likely to lead to new kinds of in-fiber detector and sensor, as well as having potential uses in ultra-low-threshold nonlinear optical devices.

Electromagnetic resonances in conducting structures give rise to the enhancement of local fields and extinction efficiencies. Conducting structures are conventionally fabricated with a fixed geometry that determines their resonant response. Here, we challenge this conventional approach by demonstrating the photo-generation of THz linear antennas on a flat semiconductor layer by the structured optical illumination through a spatial light modulator. Free charge carriers are photo-excited only on selected areas, which enables the realization of different conducting antennas on the same sample by simply changing the illumination pattern, thus without the need of physically structuring the sample. These results open a wide range of possibilities for the all-optical spatial control of resonances on surfaces and the concomitant control of THz extinction and local fields.

We present a simple refractive index sensor based on a step-index fiber with a hollow micro-channel running parallel to its core. This channel becomes waveguiding when filled with a liquid of index greater than silica, causing sharp dips to appear in the transmission spectrum at wavelengths where the glass-core mode phase-matches to a mode of the liquid-core. The sensitivity of the dip-wavelengths to changes in liquid refractive index is quantified and the results used to study the dynamic flow characteristics of fluids in narrow channels. Potential applications of this fiber microstructure include measuring the optical properties of liquids, refractive index sensing, biophotonics and studies of fluid dynamics on the nanoscale.

We report the successful production of high-quality gold wires, with diameters down to 260nm, by direct fiber drawing from a gold-filled fused-silica cane. The stack-and-draw technique makes it straightforward to incorporate a conventional step-index core, adjacent to the gold wire, in the cane. In the drawn fiber, strong coupling of light from the glass core to SPP resonances on the gold wire is observed at specific well-defined wavelengths. Such embedded wires have many potential applications, for example, as nanoscale electrodes, in nonlinear optical plasmonics, and as near-field scanning optical microscope tips.

Abstract:We demonstrate active beam steering of terahertz radiation using a photo-excited thin layer of gallium arsenide. A constant gradient of phase discontinuity along the interface is introduced by an spatially inhomogeneous density of free charge carriers that are photo-generated in the GaAs with an optical pump. The optical pump has been spatially modulated to form the shape of a planar blazed grating. The phase gradient leads to an asymmetry between the +1 and -1 transmission diffracted orders of more than a factor two. Optimization of the grating structure can lead to an asymmetry of more than one order of magnitude. Similar to metasurfaces made of plasmonic antennas, the photo-generated grating is a planar structure that can achieve large beam steering efficiency. Moreover, the photo-generation of such structures provides a platform for active THz beam steering.